What Reddit says about Uplift

“I have a sitting disability and my Uplift desk is the centerpiece of my home accommodations. I can stand for a long time and adjust the height depending on my activity.”

“I bought an Uplift and can’t recommend it enough. I did the premium walnut top and it’s definitely a BIFL purchase as it’s very sturdy! I try to stand for a minimum of 1hr in the morning and afternoon; it’s worked wonders for my bad knee.”

“Yes, all three can handle your dual 27 monitors and keyboard. Uplift, worth it super sturdy, smooth, built to last premium price. Flexispot, great value solid performance at lower cost. Autonomous, good too check weight capacity for your setup.”

“I have the uplift and my kids love the hammock while I’m working”

“The frame is $500 on its own, also OP added on a lot of crap that isn't just the desk. Floating trays, over priced cable management, etc. I think uplift's desktops are competitively priced”

“My uplift was $825-ish after discount and configuration. I think it was worth $140 to have it all come to me easily assembleable and in one shipment.”

“As someone who just 2 hours ago took apart and boxed up one of these frames that broke after one day, I am going to disagree. I thought that before I bought one too. Amazon told me I can refund it or get a discount on the broken table... I purchased the uplift frame 30 seconds after getting off the phone with Amazon. At least the frame from uplift comes with a 15 year warranty, good look getting that from these random Amazon brands.”

“This frame does not even come close to the specs that the UPLIFT frames have though. You are electing to cut a lot of corners to save a few dollars. Remember, these desks are holding all of your equipment, if a leg fails, there's the possibility that all of your items will come sliding right off.”

“I spent around $700 on an uplift desk and I’m very happy with the purchase so far, I love it for what it’s worth.”

“Uplift also has a 10 year warranty and is using some of the best motors, also your config has a lot of stuff you could get 3rd party for cheaper but the advantage of their products is it attaches perfectly to their products no fuss. I love my uplift desk and it was worth the $800”

“I got an Uplift V2 frame for $600 (added on a few accessories) and a butcher block from Home Depot that I sanded and stained for $180. Not cheap, but it was much cheaper than buying the full thing through Uplift, which I definitely recommend.”

“https://preview.redd.it/1wcowf5v35kg1.jpeg?width=3000&format=pjpg&auto=webp&s=29d4897c5d82f6a2e37263a44b32149469b638b8 I really enjoy my Uplift desk with their triple monitor arm”

“I just bought an uplift L shaped with black bamboo and I have zero regrets”

“I can’t recommend UpLift desks enough. I have 3 in my office area and two more in my kids rooms, going on 6 years now. I believe they even make dedicated L-shaped desks! https://www.upliftdesk.com/”

“Another vote for an Uplift - movement is steady and stable throughout (up and/or down). I opted for an L; it'll basically hold a verital party weight-wise (500lbs). I'm using a Gen 2 ARC and a 32" OLED (PG32UCDM on an arm), along with a work laptop and gaming laptop on stands on top with a full tower custom on a holder underneath and it's just as smooth today as when I put it together 2 years ago...”

“I’ve got an L shape Uplift desk frame with stained butcher block tops. I think it was $1200 for the frame and other Uplift accessories, and $200 for the butcher blocks $400 for that is a joke or a scam”

“I have had an uplift since the pandemic days. Couldn't be happier. I have their commercial L shaped.”

“I would say that the top is worth the cost, but you might be able to get one made to your liking for cheaper. Or get the legs first then upgrade the top later.”

“You could get the uplift desk L-shaped frame without the top for $719. This will allow you to put almost any size top on it. It can be cheaper to make your own top or get one made. Cheaper frames might wobble too much when walking on a treadmill and will get annoying. The frame is the important part of a standing desk. Assembly is pretty easy although the parts are heavy.”

“I have a 60” bamboo V1 L shaped desk that is about 8 years old. And I also have a 72” V3 L shaped desk that is 6 months old that I custom made my own desktop surface. Both are great. The v3 does wobble a bit less at height but both are pretty solid.”

“Uplift is a legit brand. I have their L-shaped standing desk. I'd definitely recommend it.”

“I have been super happy with Uplift Desk”

“FlexiSpot E7L and Uplift L-Shape both offer 30" depth configurations — those are your two best bets without compromising on stability. The E7L is the better value. Uplift gives you more customization options if you want specific dimensions. Worth noting: some brands advertise "30 inch depth" but measure from the wall including leg clearance. Double-check the actual usable surface depth before ordering. *What's your room layout like , are you putting it in a corner or against a straight wall? That usually changes which L-configuration makes more sense.*”

“Love my L shaped Uplift”

“So I have been waiting to do this review on my experience making my own standing desk. This review will cover the materials, the build process, challenges, and review of some notable accessories. I apologize for not having more pictures, but my office is literal mess right now and I was in rush to get out after finishing the assembly. I started this project shortly after graduating college and slowly purchasing the miscellaneous components to make my dream workstation. I tried my best to keep the complete build under $3,500 which I believe I achieved. However, many hours of work went into getting the tops finished and properly aligned to frame. My build list is as follows: • Uplift L-Shape Commercial V2 Frame • (2) 96”x25” Acacia Butcher Block from Lowes • iMovr EMMA Electric Monitor Arms • (2) HumanScale CPU600 Holder • Uplift Attachable Power-strip • Doug Mockett & Company Wireless Phone Charger • Uplift Leather Writing Pad • Uplift Sliding Flex Light (May be relocated) • Brass thread inserts (HomeDepot) The desk finish dimensions are 96”x25” on the main top and 72”x25” on the return. Trying to find a finished desk of this size with 1.5” acacia tops was out of my budget. I searched for 96”x30” acacia tops initially, however, the additional depth was out of my budget. Luckily, Lowe’s seems to be one of the best sellers for cheap unfinished butcher block tops. Each top coated me appropriately $350 and were shipped to my door for additional $75. This may seem expensive to some, but I searched for weeks trying to find other options. Lowe’s was by the lowest price point for large butcher block tops under $1000. See link below. The tops were finished with Poly X Osmo oil purchased from Amazon. To me, Poly X is very easy to work with as long as you apply very thin coats. Thin oil finishes go a long way. However, during the finishing process, I did I apply too thick or a coat resulting in bubbles and bumps across the top. A light sand and another layer thin layer of Poly X rectified the bubbles and bumps. Once the tops were finished, I began pre drilling pilot holes in each top for thread inserts. I wanted to have thread inserts just in case I have to disassemble the desk in the future. However, I do not recommend the generic brass inserts from Home Depot. I had several of the thread inserts shear when screwing into the pilot holes (yes the holes were big enough). Also, several of the inserts that I did mange to get inserted into the tops dislodged during final assembly. See link below so you can avoid buying these certain inserts. Once the desk tops were finished, I assembled the Uplift frame and married the tops to the frame. I will give Uplift a 10 out of 10 on their instructions and ease of assembly. They plenty of extra fasteners and other accessories to ensure you have everything you need to finish a custom build. See link below for the frame. Finally, the desk was moved to my office and I began attaching my various accessories. The most notable purchase I made was the electric monitor arms or better known as the EMMA by iMovr. Some people may question why have a standing desk and spend more money on raising arms. Well I am very tall person and I noticed that when standing at coworkers standing desk with regular monitor arms, I was looking downward at the monitors. I realized then I wanted a more upright posture looking forward than rather downward. With that said, the EMMA allows me to not to strain my neck and more easily raise all my monitors to save position when I need them higher when my desk is in the standing position. So far I have no complaints with the system. It is quite over engineered in my opinion (I am an Engineer Intern and I love this, no judgement lol) with a what I believe is a custom aluminum extrusion main beam supporting the die casted swivel mounts for the monitors. I have no doubts that the system can lift the largest and heaviest monitors. I will say I had a delay in shipping but iMovr kept me informed almost on the daily why my order had not shipped. iMovr, like any other company, was dealing with some supply chain issues but they were very helpful in keeping me up to date and giving me an adjusted it accurate shipping timeline. I highly recommend iMovr as company. I know there has been some previous issues with the company, but I believe they are under new leadership and their customer service is quite unmatched. If you are interested in the system I have provided a link below. Probably second favorite accessory is the HumanScale CPU mounts. I needed two mounts for my PC and battery backup. Very easy to mount and I like the flexibility of properly fitting the mount to the PC case. I will say I did not buy this “new” but open box for about half the price from a random eBay seller. All in all, I love my build and it was a fun challenge. If you have any questions please feel free to ask! TLDR: I built a standing desk using an Uplift Frame and iMovr Electric Monitor Arms and just wanted to share my experience with a community of people who would appreciate this build. Link list: Uplift Frame: https://www.upliftdesk.com/uplift-v2-l-shaped-standing-desk-frame/?29401=5179&29402=17671&29403=17832&29404=11390&43034=21078&29408=8707 iMovr EMMA https://www.imovr.com/products/emma-electric-triple-monitor-arm Acacia Butcher Block Tops https://www.lowes.com/pd/allen-roth-96-in-x-25-in-x-1-5-in-Natural-Straight-Butcher-Block-Acacia-Countertop/5013817645#no_universal_links”

“Uplift L shape with a solid top. I’m running 2 work stations on there with a 57” neo g9 and 2x 32” monitors. All on heavy duty monitor arms plus both desktops are on the desk.”

“I haven't set it up yet. I'll be setting it up the first week of June. I'll be adding a full tear down, transport, and rebuild review to my existing review as that question has come up before about how do these desks hold up to being moved. I'm giving my old one to my wife for her to use at work. As for your space concerns, keep in mind that a 27" monitor is not 27" wide. That is the diagonal measurement, so it will be less than 27". In addition, you'll likely have them angled toward you, so that will reduce the width a smidge more. Those same points with the laptop as well. Not to say, it won't take up the full length because it probably will. I would recommend getting an arm for the laptop as well. Where I have mine positioned is okay, but there have been times when I felt it was too far away and wished I could just easily pull it closer. Yup, the CPU holder has really held up well. The only thing I wish is that it rotated. The desk at its full height is tall enough for my to stay seated and roll under to get to the PC. But, since I can't turn it, I still have to crane a bit to see the cables and work on it. If the holder rotated, it would be perfect for maintenance as well. Finally, don't forget the importance of that blotter if you do anything at the desk other than type or if you have cats that might jump up there with you. My blotter has taken a fair amount of damage because I work on other things at my desk and I also have cats that love to jump up and be all up in my business.”

“It has held up fantastic. Not a single complaint. I do strongly recommend a desk blotter regardless of what material you get though. My blotter has taken a lot of trauma over the years and I'm sure if I hadn't had it, the desktop would be a bit worse for the wear. A blotter is inexpensive compared to a new desktop and I consider it to be a consumable that needs to eventually get replaced. Just a heads up, I just received a v3, and will be putting it together fairly soon and writing another unbiased review of it in this sub.”

“I can only speak to Uplift since that's what I have. I've heard good things about the others as well. But here's my exhaustive review of Uplift from a few years ago. https://www.reddit.com/r/StandingDesk/s/K21lrqVBUA”

“FWIW, I just purchased the V2 L shaped, 60 x 60 and when raised to my height (keypad says 47), it's perfectly stable. Have one laptop + two externals and bookshelf speakers. Highly recommend, though it was pricey even with the discounts.”

“They're really easy to put together. Some of the add-on accessories require a drill but the basics already have pre drilled holes and you just have to screw the nuts in. It is very heavy though, so that could affect how easy it is to move. Nothing crazy but probably a 2-person job.”

“I have an L-shaped uplift desk and I was very happy with the purchase. The assembly is time consuming but overall really well-thought-out, and I'm really happy with the quality of the desk and my experiences with UpLift. I got a 3rd-party heavy duty under-desk PC mount, a drawer, a keyboard tray, a side tray for my printer, and and the built-in uplift power bars. It was around 2500 total for everything but I really did it up. Since then I've also picked up an under-desk urevo walking treadmill (the cheapest one) because I'm 46 and trying to deal with the fallout of a long IT career spent on my ass. I applaud your efforts to take care of yourself!”

“Love my Uplift!”

“I’ve had an original uplift desk since 2017, been using it daily for work, raise and lower it at least once a day. Still performs like it did on day 1. I can’t recommend them enough.”

“I spent a lot of time looking for a standing desk to use for my art studio and I wanted to report back here in case other artists are looking for this exact need. I needed something that had ZERO wobble at all heights. After a lot of research I chose the Uplift 4 Leg standing desk and it is amazing! I chose the desktop with NO cup holder/wire holes - not all desktops come in that option,but the bamboo does and it is great for a smooth, uninterrupted drawing/work surface. I got mine on wheels, so i can move it around in my studio and they are smooth and also lock if you need to. The customer service was EXCELLENT! They have a real human who answers and they were fabulous helping me correct a mistake \*I\* made on my order. The desk was easy to assemble - though I wouldn't personally know because I used their task rabbit pre-made task to have it assembled for $99. I am so happy with this desk and I wanted to shout out this solution for artists and a really great company (in my experience) in case I can help others shorten their research time or allay any doubts about the product! [https://www.upliftdesk.com/uplift-4-leg-standing-desk-v2-v2-commercial/?2014=4237&2154=2935&2931=3821&3371=3922&2017=11390&14927=11667](https://www.upliftdesk.com/uplift-4-leg-standing-desk-v2-v2-commercial/?2014=4237&2154=2935&2931=3821&3371=3922&2017=11390&14927=11667)”

“Love my Uplift!”

“Love my Uplift!”

“Love my Uplift 4-Leg! https://preview.redd.it/iezq1fzmss1h1.jpeg?width=4284&format=pjpg&auto=webp&s=a38312d62a3bc8468a7546616987cbea357366ce”

“Uplift makes good 4 leg standing desks, but shipping might cost a lot more.”

“I have the uplift v2 3 leg L shaped desk and can sit (220 lbs) on it, and it seams like the motors do not notice the extra weight. So any uplift 4 leg would work really nice and quiet. I got uplift because a lot of other desks had loud motors”

“i just got uplift 30x70 4 legged desk. it is on the pricier side, but you may not need it as big (it will reduce the cost a bit). but the 4 legs makes it absolutely rock solid. and the customer service was insanely knowledgeable, and helped out greatly! i use a wacom cintiq on it, and i cannot have it moving at all, and it certainly does not. with memory settings, i transition from standing to sitting all day long. really love it! here's the base system you can customize to your liking: [https://www.upliftdesk.com/uplift-4-leg-standing-desk-v2-v2-commercial/?2014=4237&2154=2935&2931=3821&3371=3922&2017=11390&10977=8708&14927=11667](https://www.upliftdesk.com/uplift-4-leg-standing-desk-v2-v2-commercial/?2014=4237&2154=2935&2931=3821&3371=3922&2017=11390&10977=8708&14927=11667) good luck!”

“i just got the uplift 4 leg commercial style frame. 72x30 with walnut butcher block top. i use a wacom cintiq to produce artwork, so i'm super sensitive to any wobble or instability. this desk is absolutely rock solid. very heavy duty (and slightly unwieldy to assemble at times), but so well made. but the biggest factor is the customer service of uplift. they were super helpful and responsive with all my questions before i purchased. they also promised that it would be delivered by my small window of availability to receive it. and they totally came through. so all in all, a great and confident purchase. little nits: \- the frame is so wide underneath the table top, that there's very little room for any (clamp on) mounting items. ie: modesty panels, even my ergo arm was a bit touch and go. i'm able to make it work. i hear the upcoming 4 leg v3 will address this, but i could not wait with my work schedule. \- there are a lot of cables for all the legs. but with some cable management brackets, i was able to hide them all away still with good range of movement for the variable heights. side note: i used my black friday discount to pay for the take away of my previous standing desk. hope this helps!”

“I have a four leg uplift and it is awesome. I got the walnut butcher block rather than the wide plank. Very stable, looks great. I highly recommend the casters. I did not leave out the back bar and I wish I would have (for monitor mounts). I will likely have this desk for the rest of my life.”

“They have locks. No movement from mine. I was really concerned about stability which is why I got the four leg. No issues.”

“Uplift Desk is having a sale until December 2 that they call the "Best Sale of the Year". Code BFCM saves up to $670. I have their V2 two-leg desk and am very satisfied with it.”

“I was mistaken. I actually have the V2 **4**\-leg desk -- not the 2-leg one. As you would expect for a 4-leg desk, it is rock-solid when fully raised. This is with a 60" X 36" X 1.75" butcher block top.”

“I got a Swaner Hardwood 60"X36"X1.75" maple butcher block countertop from Home Depot to use with a V2 4-leg Uplift desk. It has a polyurethane finish which has held up very well and eased corners. It is very heavy but the desk is quite stable even when raised to maximum height. They also sell finished 48"X25" countertops in both 1.5" and 1.75" thickness. All these countertops are lighter in color than they appear on the website. You would need to drill holes to mount the top to the desk but Uplift supplies easy to understand instructions. I had to buy a screwdriver bit extender for final assembly -- the leg hardware interfered with the body of the drill.”

“Just bought one. It’s is awesomely stable.”

“I used an electric Varidesk tabletop model at work for several years before I retired. I hated it as it was way too high when I sat but I used a footstool. I changed positions multiple times per day as I have degenerative arthritis and sciatica and it helped. After I retired I became way too sedentary so I decided to buy an adjustable desk. I did a lot of research and decided the stability of a four leg desk was importantly to me as well as a hardwood top for durability. I’m very fortunate in that I could buy whatever I wanted but I tend to prefer a bargain. I decided to buy a FlexiSpot four legged base and a butcherblock countertop. While I was doing my research I was also looking for a deal on Facebook Marketplace and within a couple of weeks I ended up buying a like new Uplift four legged base with a 60x30 hardwood maple desktop which sells for $4450 new for $650 less than 20 miles from my house. The FlexiSpot and butcherblock world have been about $200 more than that. I’m really happy and change positions daily on days when I’m at my desk a lot. BTW, I’ve since read that people report the FlexiSpot 7 two legged desk and the Uplift v2 and v3 two legged desks are are very stable. I do not recommend buying a manual crack desk add that would get old very and I doubt you’d change positions much.”

“Check out Uplift. My four legged v2 desk with a 60x30 hardwood desktop, although not L-shaped, has a 535 lb weight capacity. Be aware, Uplift is not a budget desk by any measure but the quality is beyond compare. You’ll only have to buy once.”

“Uplift owner here with 6 monitors. It works.”

“If I type and the monitor vibrates at all, it’s a non-starter. You don’t have to live with that. But you do have to pay to avoid it. Weight, 4 legs, and a crossbar. Like the uplift 4 leg/crossbar setup.”

“I've got the uplift 4 leg v(latest 2 maybe) in the 80x30 and it's rock solid. Before that I was using an ikea desk which was just flat table top on two short sets of big drawers, literally can't get more stable, and I would say both are about equally wobbly (which is practically zero).”

“If you have a drill with some bits already, the instructions are included on how to do it. I think there might actually be a video. The hardest part honestly is just making sure the legs are perfectly parallel with the desk, but the process is relatively easy. If you don’t have the power tools at hand, then yeah probably don’t recommend going this route lol.”

“How much work are you willing to put in to save some cash. An uplift v3 frame only is currently 469 USD. You can get a butcher block from a hardware store for less than 200, depending on the size. I’m also *not super* sure about this, but they may be able to cut it to the size you need in store (Lowe’s or HD). Ask before making the purchase. The uplift has adjustable width up to 70” I believe. Sand the edges. You can end the story there, or if you put in a little more cash and time - some more sand paper, polyurethane (or some homemade butcher block mineral oil and wax seal), and a couple days of elbow grease will get you a premium product for ~650, something that would normally costs 1000+ pre done. If it’s just for gaming, the butcher block may not be exactly what you’re looking for. But the frame from an uplift is pretty solid for two legs. Can’t say the same for some of the budgets brands.”

“Another vote for Uplift V3. I am 5'3" and was able to set it to a super comfortable sitting height. I also love the 30" depth- makes the most out of the narrow corner I have for the desk.”

“i've had my uplift for almost 2 years and i love it! raise and lower it at least 6x per day”

“Ahhh I see, I also lean on it, and I lean even when it’s almost at max height (while standing on that surfboard thing they offer as a free gift) and I don’t ever feel like the deck is going to move or topple over or anything. But yes, hard to say when I haven’t tried both”

“I have the C legs and it’s quite sturdy! The T legs will obviously wiggle less, but the extra leg room and clearance with the C is awesome. It really is a super sturdy and well made desk regardless”

“Seconding this desk! I feel like the mechanics are super smooth and the desk is very stable”

“Had mine for nearly 6 years and would recommend”

“Get one with dual motor or self don't even buy a standing desk. And if budget is no issue, I wouldn't skip uplift v3. You are going to pay premium but It's like the complete package that you wouldn't have to worry about and I mean it. You can read more here: https://off-axisdiscussion.vercel.app/article/best-bifl-standing-desks-2026”

“Which desks have you had that have been disappointing? I’m using an Uplift V3 and it’s been great so far.”

“agreed, I'm really happy with my v3, definitely worth the investment imo”

“if you want stability i would go with the uplift v3. its electric lift is smooth it stays super stable with dual monitors at full height. you can find some good options [in this thread](https://www.reddit.com/user/BrushWild1866/comments/1n9hkgt/the_best_standing_desks/)”

“Update: I found a 72x30 butcher block uplift v3 for a $100. Great condition, everything is perfect. Awesome steal!”

“Im looking to get a standing desk, but at a heavy budget price. Ive seen prior posts mentioning 3-4-500 dollar desks, and that's definitely out of the price range. Im not quite sure of which option to go with. I have a 3 monitor mount, with 3 monitors, and potentially the pc on the desk (that's still to be decided). I would ideally like to get a 63x30, or something within that area. 1st option: get a cheap $100 desk from Walmart, but it's 63x24. It is the EDX electric standing desk. 2nd option: buy just the legs/stand, and buy a heavy duty block for the desk from home depot or such. 3rd option: hunt for something on Facebook that fits. I guess im not sure if weight concerns are something I should be thinking about, if the structure and strength of option 1 is reliable, or if there is a good standing desk base for $100 or so. I appreciate the help and recommendations. Thank you in advance! Update: found an Uplift desk, 72x30, butcher block for $100. Thanks yall!”

“I have my systems on two separate [Uplift](https://www.upliftdesk.com/standing-desks/) desks. Lots of good accessories and vesa monitor arms.”

“I have an uplift v3 2 leg with 1” laminate top and it is super solid. I haven’t had any complaints and it will hold up to about 300lb I believe. Motor runs good so it’s solid by me. I’ve heard a ton of good things about Deskhaus as well and love their super honest comparisons on YouTube. Also heard great things about Desky, but I personally think they are overkill on the price for lack of value. Solid desk just price is less worth it.”

“Love my Uplift!”

“Uplift v3! you can also find some good options [in this thread](https://www.reddit.com/user/LegitimateReveal510/comments/1rwvdra/the_best_standing_desks/)”

“I have an 80" C leg Uplift, and it is very sturdy. I can wobble it if I try, but I have my monitors on arms, and they do not move under normal use, even at the highest height.”

“Even getting an Uplift frame and supplying your own top would cut it in half.”

“This. And agree on the button present - worth the little extra.”

“Second this! I’ve had mine for almost three years now and it’s held up great, even after constantly adjusting heights throughout the day. The presets are such a game changer, especially when I want to switch from sitting to standing quickly without fiddling around every time.”

“Uplift v3 is the best overall imo”

“Personally leaning towards the Uplift myself, but I'm worried a 1" board is on the thin end as I'm hoping to go for the 80" width. Should be fine on the 72". Magnus appealed to me a lot but I'm not sure on the depth and value compared to the alternatives for the price.”

“For another option, I just got the uplift v3 60x30 and I am impressed with the stability at max height on their "soft roll casters" on carpet. My screen wobbles slightly but it is a 55" TV with a weird stand that almost seems designed to cause wobble, the wobble is only really noticeable with lights that glare off the screen, and I am pretty sure it wobbled slightly just from walking around the room when it was on my very rigid non standing desk. With a 1" thick desktop it reaches 48.7" without casters and would be 53.4" with their heavy duty casters. Yet another thing to consider: if it is just the monitor height you are worried about you could try finding a monitor arm with an easy to adjust height option.”

“the Uplift v3 is the best standing desk available right now imo”

“I’m a big fan of dual motor sit stand desks. Have not really cared about the brand, they likely come from the same production line and might not be worth the premium for a known brand name. I do recommend solid wood table top, I’ve got a birch butcher block one, 2ft by 6ft and been using it for over 5 years, looks barely used.”

“I'm tall as well. You'll have to go name brand/expensive. I have an Uplift V3. It's been fantastic so far”

“I just got the Uplift V3 not even a week ago. I was really hesitant of the price, but upon comparing others I'd say it's right in line. So far its super sturdy and I'm a huge fan. I have a fairly heavy 3 monitor setup.”

“I just got an Uplift V3 standing desk and love it so far”

“The quality of Uplift deals is amazing. I have a four legged desk and it has four motors and each set of legs weigh forty lbs. The weight capacity is almost 500 lbs. The 60 x 30 hardwood maple desktop is so heavy I had to pay a couple of guys to carry it upstairs.”

“check uplift. the v3 desk meets your req's.”

“The Uplift v3 is great, I've had mine for about a month now. its super stable and the motor runs smoothly even with two monitors and my gaming PC on it. theres a good breakdown of the best options [in this thread](https://www.reddit.com/user/BrushWild1866/comments/1n9hkgt/the_best_standing_desks/)”

“I love my Uplift V3! I don’t really ever notice and wobbling - it’s super solid even with the massive 80x30 Acacia Chevron top.”

“I have two 32” BenQ monitors, a 16” laptop, a HP Z2 G9 mini and a Samsung subwoofer mounted on my desk and it’s been fine. Just make sure the frame of the desk you’re looking at, the frame can handle the weight you want it to lift - some frames are rated to lift more than others. I have the uplift v3, which can lift 355lbs, but had looked at the ApexPro which has a lifting capacity of 600lbs.”

“Agree. I also have the V3. I have two monitors on mine plus a laptop. Doesn’t wobble until you lift it almost as high as it goes. I almost did the Apex Desk Haus legs, but just was super sold on a top from Uplift. I also liked all the cable management from uplift.”

“if you want an excellent , durable option I would highly recommend you [this](https://linktw.in/aRJQwN) from uplift and it works pretty good for me. Its overall a pretty well built standing desk and has good stability, anything below this would be a gamble.”

“Can confirm. With the casters and 1.5in butcher block top my v3 two leg is at 25.2in in lowest position.”

“I’m very happy with my uplift v3. I put mine on casters and got 1.5in solid walnut. Could’ve got an IKEA frame, which is priced pretty much same as uplift. Top from IKEA is veneer. Frame from uplift much heavier duty. Super happy with their customer service too.”

“I use and recommend an [uplift desk](https://www.upliftdesk.com/). I’ve been using it for years and it works exactly the same today as it did when I bought it. I have a ton of weight on it too with no issues. Whatever you decide, be sure to get a desk that has presets.”

“I have had an Uplift V3 Desk (60 x 30) with a 1.5” butcher block top and I am very happy with it. Very sturdy at all levels. Was impressed by the ease of putting it together. Physical instruction manual was easy to understand and the YouTube videos out there made things even easier. Some of the freebies were nice such as the provided standing mat and a clamp on cup holder. Paid about $1100 total for mine. All the parts including the desktop felt premium. All-in-all very satisfied.”

“Yeah that is true, slight wobble at the highest height, but only if you go out of your way to shake it. At the regular standing height for me like 4-5 inches down from the highest setting, it is pretty damn solid even if I try to shake it. I was a bit hesitant to get a non-4 legged frame, but I read some of the reviews and Reddit comments for the V3 and it was actually one of the YouTube videos from Uplift where one of their product designers/engineers was talking about the structural upgrades from the V2 to the V3 that sealed the deal for me. I see that OP has $8k budgeted for this, but I don’t think they need to go anywhere near that to find a desk they will be happy with long term.”

“I can also vouch for the Uplift v3. It's nice.”

“Short guy (5’3”) here! I bought an Uplift Desk V3 late last year and love it. Meets my height needs, comes with a cable organizer, and looks great. I got a basic laminate one which has been fine and durable but you could easily customize it to a different material as desired.”

“While the stability of the 4 leg desk is better, the 2 leg version is pretty stable. Unless you cannot have any wobble, the 2 leg is good. Another option to look at is get a L-shaped desk.”

“First standing desk I’ve ever used, so I can’t say much. But I do like it a lot, it feels stable at my standing height. I was worried about the laminate table top not being able to handle monitor mounts but it’s holding up okay! If I had the space I’d go for a wider one.”

“I got an Uplift v3, 60x30 laminate tabletop. I chose two grommet holes. It was an easy assembly. I was between this Vernal but ended up going with Uplift just because more people seemed to have done business with them.”

“Can’t vouch for the Haworth, but I can vouch for the uplift, it’s basically solid when lowered, and only has a teeny bit of wobble when at the highest, really only noticeable if put a lot of force on it. Uplift also supports ~355 pounds (not including desktop). I have a dual monitors, plus heavy 8” speakers, and butcher block I used weighs ~50lbs.”

“Uplift v2 - yep, I'm five feet nothing so the height adjustability is great for me.”

“Have you considered not using your bedroom for work? I also work from home and have intentionally kept my desk in my living room. I have an Uplift Desk and I love it. Customer service is good from this company too. My desk is in my living room though.”

“[Uplift Desk](https://www.upliftdesk.com/standing-desks/) Have had mine for five years and is excellent.”

“I bought an Uplift in February of 2025 and I’ve been absolutely thrilled with it. It’s extremely solid, doesn’t feel cheap in the slightest, and is sturdy as hell. I’m not trying to oversell it, but for the price I paid, I think the value is definitely there. Just wait for a solid sale or even look at their clearance items. Also, get the larger size. I’ve always been a person stuck with smaller desks and so I splurged for the longer/larger version. It’s worth it.”

“I was just going to come on and say the same thing. My experience having bought a cheap one was that after three years it wasn’t moving very well and then the desktop broken half when I put a new monitor on it. Bought an UpLift and it’s solid as a rock.”

“They make it look kind of good in the photo but you can still tell it's going to look cheap in person. I would not go cheap with furniture like this. It might be wobbly, the motor might die, it might get damaged easily, and then you're stuck with a piece of junk. Their website claims a 365 day warranty but I don't have a lot of confidence in that. I helped my partner pick out a standing desk and eventually went with Uplift. It is very nice and they have a 15 year warranty. I think IKEA is also a decent option, especially because you can see it in person before buying and they have a 180 day return policy. I find [Wirecutter](https://www.nytimes.com/wirecutter/reviews/best-standing-desk/) to be helpful. They give their picks and also explain why they didn't choose others. Definitely read over why they don't recommend cheap standing desks. Also check to see if your employer will help you out with buying a desk.”

“Depends on what you’re willing to spend. That said: weigh out or at-least approximate the weight of everything on your desk. If a 2 leg one can support it, save money and go that route. If it weighs more go 4 leg. 4 legs have more stability, but it’s really not a big deal unless your standing all the time and/or leaning on it and whatnot. I bought the DeskHaus 4 legs cause I wanted future proofing Incase I do some unexpected shit later, also because they had the only frame to fit my 96” x 36” desk. Anyway I’m sure others will have their opinions as well. Of the three you mentioned, Uplift is the only one I’m well familiar with. I almost went with them myself. Good company with good options. Just depends what you are looking for and what your budget is.”

“I ended up caving and got an uplift desk outside of college. They’re pretty expensive but honestly it has helped me out immensely. I probably change from sitting to standing around 10 times a day and it’s held up for around 4 years so far without any problems. I even got a walking treadmill and sometimes I get wrapped up in a video game and realized that I just walked over 2 miles. 🤣”

“I have a two leg Uplift with a crossbar, and I’ve never noticed any wobble. They are great desks!”

“Id highly recommend Uplift, I have the v2 and its perfect. I believe they recently came out with a v3 as well. you can find a good breakdown of the best options [in this thread](https://www.reddit.com/user/BrushWild1866/comments/1n9hkgt/the_best_standing_desks/)”

“I can't say I've tried a whole bunch of different standing desks, but I've had my Uplift Desk for about 8 years now, and it's been excellent the whole time. My biggest recommendation is, no matter who you get your standing desk base from, get your tabletop from somewhere else. You can put just about any tabletop you want onto most standing desk bases, and there's simply no reason to limit yourself to what these standing desk companies offer you with their tabletop options. I, for example, opted to order a raw wood tabletop for relatively cheap from a wood company, and I sanded, stained, and coated it myself for some pretty tremendous cost savings relative to what I would have paid for something as nice bought already made.”

“Upvote. We have 2 Uplift desks and they are incredibly sturdy.”

“Love my Uplift desk. Higher quality usually means a stronger frame that doesn't wobble when it's up high. Keep in mind you'll use a desk for a long time if you get a good one. Sometimes I have to remind myself to use it as my office is for both work during the day and gaming at night. I'll lower it at night and forget to raise it the next morning.”

“If you are wanting it to be gaming-related, SecretLabs is a good choice. But if you are wanting it to look professional and clean, go with UPLIFT Desk. They make some of the best standing desks, hands down. No wobble, hold a ton of weight, and they have hardwood tops or laminate desktops. They are outstanding. I have three of them and one from Secret Labs.”

“The back and neck pain struggle is so real, I finally switched last year and it’s a game changer. If you're stuck between those, Uplift is usually the gold standard for stability, especially so it doesn't wobble when it's high up. Just a heads up though, definitely budget for a good anti-fatigue mat standing on a hard floor for hours is its own kind of pain.”

“I have a four legged uplift v2 and at my standing height I can’t get my 57 inch monitor to wobble without putting in real effort”

“I also have a 2-legged one, and it's so stable and heavy that I can't imagine it not holding anything in place. I doubt you really ever need a more stable construction.”

“Unfortunately most people won’t have tried more than one or 2 brands. My vote is for uplift. I’ve tried the Secret Lab standing desk at a friend’s place as well. While it wasn’t bad at all, I just like the look and feel of Uplift more because you choose wood laminate or actual wood. The Secret Lab table just felt like a black chunk of metal. Not a good or bad thing. Just an observation. You can get mats for it though. Full disclosure, I’m not some power user of the standing feature, I’ve only used it a hand full of times. Why I went with uplift was actually because of how LOW it could go. I started having a lot of neck and back pain and I was already showing some signs of carpal tunnel. All because I work while sitting and my main hobby is gaming as well so basically I’m sitting A LOT. Lol. I started researching into good chairs and tables along with getting obsessed with the right posture to sit and the angles based on your height and even the difference in leg and torso lengths because even at the same height people can have different length compositions for upper and lower body. Getting a desk that was well reviewed and had good quality was important but I really needed a desk that could go much lower than an average desk so I could position it in the most optimal way for me to achieve the posture I needed to maintain. Uplift checked all those boxes and now I’m here a few years later with all my pain left in the past for the lost part. I say for the most part because everyone likes to sit like a curled shrimp every once in a while and there’s no cure for that. 😂 Uplift was definitely expensive but I think it cost me like $1195 with quite a few random accessories I also added to it. This was back in 2022. Obviously the value is subjective based on your financial situation as well but this was one of the best investments I ever made for a pain free back, neck and hands. I’m sure you could get it for a little cheaper when they have sales going on but I don’t know how recent inflation and tarrifs may have affected the base cost. And again in the interest of transparency I also got the Herman Miller Arron at a good discount around that time because I used to work for a real-estate company that had a partnership with Herman Miller. Still pretty expensive but worth it for me since I spend so much time sitting. Hope this helps.”

“My Tresanti broke in a few weeks, so returned it asap and got an Uplift Desk instead.”

“Love my Uplift!”

“I would go with Uplift due to their reputation, weight capacity, and warranty. If you wanted to save a bit more money, go with Flexispot.”

“I've had three standing desks over the last 7 years: * Started with a VIVO dual motor from Amazon; broke just after 3 year warranty mark * Replaced with Uplift V2 C-Frame in 2021; made a custom top; killer desk, I still have this in my shop * Currently running SecretLab Magnus Pro; even more killer of a desk The Uplift desk is great. I have it sitting on 3" casters and even still it is very stable. The Magnus Pro feels beefier in every way; the weight and rigidity is next level. I got the Magnus for the specific features (cable management, magnets, etc) and appearance. I can't speak to long term reliability but I can say both the Uplift and Secretlab are tanks and remain stable at height for my 6'3 frame. Both desks have a laptop and one 32" display. The Uplift uses an arm, the Secretlab display is on a stand. Edit: As for usage, I do stand multiple times a day. Mostly if I'm in a meeting and my watch tells me it's time to get up. If I'm not in a meeting, well, I go walk around the house or something.”

“I wanted to get Deskhaus, but they were non-responsive. Which was made more offensive by the fact that the company owner posts regularly on here, but ignored DMs. I ended up with Uplift instead of Flexispot. Got a better deal, plus got the size, and shape, and gromits. Flexispot wasn't as...flexible. Plus the reviews on Uplift desks here are better than Flexispot.”

“I have the uplift frame on a custom butcher board. It works excellent. But for the price, the $100 amazon Chinese standing desks are 95% of the value at 20% of the cost.”

“I’ve been pleased with my new Uplift desk. worth the price tag..”

“my uplift is amazing. I was too nervous to go with a cheaper alternative because I would not tolerate any wobble. Uplift doesnt have that issue”

“Uplift is what I have, they basically last forever and the memory setting means I can actually easily adjust back and forth. Pricey yeah but they are worth it!”

“Uplift. It costs more than the knock offs but it’s solid. I had a knock off. It only cost 300.00. Did it wobble and groan if I leaned on it? Yep! Upgraded to an uplift and never looked back.”

“I have an Uplift. I stand for at least one meeting a day. For me it's worth it.”

“Uplift v2 .... still going strong 5 years later. Just got an uplift v3 for my wife. Love them both.”

“I just bought my second uplift desk and very happy with the quality. I am a buy it for life kind of a person so not going to skimp on 100 dollars if I can get something that'll last forever.”

“You get what you pay for, my friend.”

“I’ve tried both, had the Uplift V2 for a year and recently switched to a Fully Jarvis. Honestly, the Uplift feels a bit sturdier at max height and has better cable management options, but the Jarvis looks cleaner and the bamboo top feels premium. The Branch Duo is nice too if you want something more compact or budget-friendly. I’d say Wirecutter’s list isn’t wrong, but it really depends on how tall you are and how much gear you put on your desk.”

“I have an Uplift desk and absolutely love it. Great build quality”

“Yeah the price seems a little too good to be true for something like that, especially with free shipping. I just picked up an Uplift desk after months of research looking at a bunch of different cheaper options. Curious to hear any real reviews”

“Get a real standing desk. Uplift seems to be the gold standard, but Flexispot is pretty great too for a cheaper option. Having a big flat surface you can set at any height is a game changer.”

“You’re not wrong, but fwiw the Uplift desks are extremely well built and solid and I’m not sure you will notice any wobble on the two-leg model. I have one with a laptop, 2 displays, and large PC and some misc books and things in my desk drawers and it’s rock solid even when extended to standing height.”

“3 years on an Uplift. Zero complaints.”

“I own an Uplift V2. I am extremely happy with it.”

“I like my uplift desk. But before buying look at the min max height adjustment. My previous desk did not go down as much as I wanted it to, and caused me to be uncomfortable, which led to the purchase of uplift. It’s a game changer for me.”

“Another vote for Uplift. I have the 80"x30" commercial V2. It's holding 3 monitors, 28"-32"-28" then a PC in a Steel Corsair C70 hanging off one side (narrow way). Then 3 geodes, probably totalling about 80lbs, counterweighting the other side. I'm really happy with it. It was quite stable when I didn't have the Geos counterweighting it. However, after like two years what I think was it's object strike detection seemed to go off when going up and down despite not hitting anything. I think a slight flat spot might have formed somewhere in the lift mechanism from where I always stopped it, and along with my poor balancing, the combo was tripping it. After a bit of trial and error, I realized balancing the load on the desk made the problem go away. I'd bet money it says to do something like that in the manual.”

“It does feel solid. It does have a little flex. Working/gaming, normally, it doesn't move. At full extension, if I two elbow lean on the desk I get about an 1/8" rock, add a chest lean at the same time and maybe a 1/4" movement at desk level; there's a chance the carpet/shed floor is adding a bit of spring. I'm very comfortable with it. If you want as little movement as a 4 leg desk [they make this now.](https://www.upliftdesk.com/uplift-4-leg-standing-desk-v2-v2-commercial/?2014=4237&2154=2935&2931=3821&3371=3922&2017=11390&14927=11667)”

“Avoid the cheap Amazon brands. Uplift and Fully are well built, find one used. With all the WFH people going back to the office there are a ton for sale. Get yourself an adjustable keyboard tray and monitor arms. That way you can get your head and arms in proper natural alignment. I'd also recommend a trackball like the Kensington Expert to prevent wrist strain.”

“Also the Autonomous ErgoStool is nice. I have lower back problems and just can't sit in an office chair for very long.My desk is in standing mode 100% of the time. If I'm casually browsing the web I'm leaning back on the wobble stool.”

“Quality issues mainly. The wood is very easy to scratch even if you are very careful. The sliding drawer sucks very bad, I could never close it without it sliding out constantly. The cable cover got stuck after few months even tho I didn't really use it to consider improper use. So that much quality issues made me regret paying 2k for that desk. If those are not dealbreakers then it's a sturdy desk and does its job as a desk but honestly, with that price, Uplift would be much better.”

“I also have UPLIFT.. I think I paid $1500 for top tier and brace between the legs.. zero wobble”

“If you’re looking for the best standing desks, I’d personally recommend: 1. [Uplift V2 Standing Desk](https://www.reddit.com/user/Stunning-Maize/comments/1p0mokp/looking_to_upgrade_your_workspace_here_are_some/) – super sturdy, customizable, and smooth electric height adjustment. Definitely worth it if you want something that lasts. 2. [FlexiSpot Q8 (55” Bamboo Desktop with Wireless Charging)](https://www.reddit.com/user/Stunning-Maize/comments/1p0mokp/looking_to_upgrade_your_workspace_here_are_some/) – stylish, eco-friendly, and comes with convenient wireless charging. Great balance of looks and functionality. Both are solid choices depending on whether you prioritize premium stability or added features.”

“Uplift has a load of choices in 48x24: Bamboo, rubberwood, mango, birch. I’d say birch and rubberwood are the lightest.”

“buy a nice used one. The uplifts and fully Jarvis that cost 1K+ used go for 200-300 used. I am in a big city and see them all the time, and have bought 2 and sold 1 with no issues”

“I'll add another vote for an Uplift desk. I'm 5 years in and haven't had any issues.”

“I went with Uplift and have been happy. I have the 60 x 30, tons of space and i've used both dual and tri monitor setups and it handles them easily. They are on the expensive side but are solid and I feel very worth it. buy once cry once. It's electric, and the keypad has 4 memory settings so I have one for height, one for standing, and one for standing with a fatigue mat underneath. I've added underdesk mounts for my personal PC and a shelf/drawer from Vivo to store things and set my laptop on so it's off the desk.”

“i got a standing desk during my last pregnancy and it was a game changer. i went with a vari desk converter at first because it was cheaper, but eventually upgraded to a full uplift. for under $500, check out flexispot or fully's lower-end models - they often have sales. make sure to check the weight capacity if you're like me and pile things on it.”

“I use an uplift as well. Would recommend and I would buy again if I needed another one. Works as well today as the day I got it.”

“I have an uplift and love it”

“Ditto for me. Mine is on carpet and quite stable at standing height.”

“I got an Uplift a little over a year ago and have been very happy with it. Really liked the options for customization.”

“I have Uplift desk and works great (5’9”)”

“I'm pretty happy with my Uplift. You'd definitely save a good chunk of money sourcing the top separately, though.”

“I have both a flexispot and an uplift. There’s definitely a more luxury feel with uplift. No issues with the flexi spot I’ve had for the past 6 years though.”

“I personally have the Uplift V2 standard and it is rock solid. I will never go back to a cheap or two legged stand-up desk.”

“I really like the adjustable Uplift Desks, variety of sizes, finishes options, modular add-ons for drawers, trays etc....might be pricier than the bare bones off brand ones, but quality They have discount codes”

“imo the uplift v2 is still the best all around. I like the stability, quick smooth height adjust, and customization options with the memory presets and different top finishes”

“I have the Uplift V2 with a mid size desktop and 4 monitors on it, two Dell 40” and two Dell 32”. It is solid, quiet and smooth. However, if I get new, I would get the four leg version. Extra sturdiness doesn’t hurt. One thing to pay attention with four leg version is to make sure there is enough overhang on the desktop so you can mount monitor arms and desktop accessories.”

“If you want built to last, you want uplift or above. If you want price to performance Flexispot E7 is probably the best value. Anything below E7, including Flexispot's other desks like the E5 are "budget" desks with lower build quality. If you can only afford a lower end desk, maybe get the one at Costco so it can be returned easily if it fails, assuming you have access to Costco.”

“Keep in mind standing desks are generally expensive. It used to be fully and uplift desks around $800 were the starting point. Those desks still cost about what they used to and are still the same quality (except fully, they got rolled up into Herman Miller. Price went up noticeably, quality stayed the same.) Flexispot are considered a cheaper desk, but the E7 Pro really shook things up by being reasonable quality at a significantly lower price. It's the cheapest desk I would reccomended for a serious buyer. Anything cheaper than it gets those prices by using significantly cheaper motors that aren't built to last. (Waiting for that one person to point out the new reigning budget champion over the E7 Pro because I haven't shopped seriously for desks in a few years.)”

“I’ve got an UpLift and no complaints, but FYI, standing isn’t a panacea. You need to move and you need good posture in the positions you’re in. I’m no ergonomics expert, but I have found… 1. If I’m perfectly vertical in a chair, I get uncomfortable and I’m more likely to slouch. I need the chair to be reclined to a degree so when I relax, gravity naturally pulls my back into the shape the chair is providing. It also helps to have something to rest my feet on so I can maintain a 90 degree angle at my knees. 2. When I stand, I have to make sure my feet are shoulder width and I have to imagine my shoulder blades pinched slightly. These two cues help me keep the curve in my lower back. 3. Get glasses, a big monitor (or more zoomed in), an arm that pulls the monitor closer to you, etc so that you never feel the need to lean forward to see. 4. I switch from sitting to standing a lot during the day. I also take multiple walks and stretch breaks throughout the day. 5. Good luck! After years of experimenting, these have significantly improved my back pain (while not entirely eliminating it).”

“I’ve had an uplift for a few years now. Even if you don’t stand a lot, an adjustable desk is great because most non-adjustable desks are simply too high. Mine is usually in the lowest possible height setting. When standing and typing, I do notice my monitor move slightly. It isn’t a lot and I can overlook it, but if I bought again, I’d consider going with something more industrial to avoid it Whatever size you’re thinking about getting, strongly consider going bigger. I thought the smaller size would be fine, but I bought the bigger one any way and I can’t imagine being stuck with the smaller one. I’m pretty happy with the purchase even though my time standing has reduced to maybe an hour a day.”

“Uplift V2 if you never want to think about it again. FlexiSpot E7 if you want to save $150-200 with no meaningful sacrifice. Skip Vernal — stability test reports are marketing. Real ownership reviews tell a different story. What failed first on your current desk — motors or the frame?”

“Uplift and FlexiSpot E7 are the two I'd go with if budget isn't the issue. Uplift has better customer service and a longer warranty. FlexiSpot E7 is nearly identical build quality for $100-150 less. Both are dual-motor, rock solid at standing height, and will last 10+ years. I'd skip Vernal — mixed reviews on long-term stability. One thing nobody mentions: buy just the frame and get a butcher block top from IKEA or Home Depot ($60). Better surface, custom size, same price or cheaper than their bundled tops. What's your desk space like — do you have room for a full 60" top or are you working with a tighter corner?”

“My Uplift is holding up quite well. I've seen reports from others that mentioned issues, though.I also have seen good things about Deskhaus, but I have no personal experience with it. I think a lot comes down to proper assembly and maintenance and "getting what you pay for." As with all things manufactured in this late stage capitalism world we live in, we have to fight against planned obsolescence and lack of quality. Hope you find one that lasts. Definitely report back in a couple years about what you ended up with. I think we all need to help each other with reliable and sincere feedback.”

“Absolutely love mine. Best investment I've made in a long time, but it was not cheap. Mine is an Uplift.”

“Uplift. 30x60 with 4 monitors and 2 PC towers. No issues at any height”

“I have a flexispot at work, and an uplift at home. If money is a concern go flexispot. If not, uplift dual motor.”

“To follow up i have laminate tops. Theyre study, and ive no issues with either the flexispot or uplift laminate tops”

“Here's my review, from years ago, of the UPLIFT desk I got. [https://www.reddit.com/r/StandingDesk/comments/gqpdsb/a\_few\_months\_in\_update\_on\_the\_80x30\_uplift\_i/](https://www.reddit.com/r/StandingDesk/comments/gqpdsb/a_few_months_in_update_on_the_80x30_uplift_i/) I still have it. It's still rock solid.”

“I have an uplift desk and love it. Mine wobbles if I put any weight on the front side. As far as space I have 4 32in monitors, speakers and a subwoofer. With enough space for other stuff. Weight distribution is also key because the motor will stutter if the distribution isn’t even. And by stutter I mean you will think your desk is having a seizure. If you live in Austin, I went to their store front and brought a scratch and dent one for $500 with legs. The scratch was some of the wood had chipped off. To this day no one has noticed.”

“Note that Flexispot (used to) heavily astroturf reddit, and they still might. After weeks of research 2 years ago Uplift 100%. I bought one used on facebook marketplace am tying on it rn. Amazing, solid, basically I never think about it. It just does its job. They great on the phone, good wood options, reasonably priced. I have bamboo but I would go rubberwood if I did it again.”

“Worth it: 100% Stand: 10% of the time Adjust height: 20% of the time After a lot of research 2 years ago, I bought an Uplift. It was a couple hundred used on Facebook Marketplace, pls another $150 or so for a Taskrabbit to move it (and tip). I would start there if I was doing it again, and wanted hardwood/rubberwood/bamboo top, and 'built-to-last' grade. Deskhaus was the reddit darling at the time --it is in a sense a one-person show, and there were some troubling notes about how all his early-days staff was no longer with the company -- you're sort of relying on one dude to not lose his mind over the next 10 years (the resonable life of an *expensive brand). If you are on a budget, look either used, or just buy whatever is on Amazon for $300 with 10k 4.5+ stars - like VIVO or something -- to try it out - if it lasts 3 years you'll have gotten your money's worth. Note, there is a a /lot of astroturfing on this subreddit, buyer beware.”

“I have two of the Uplift V2 desks, both with 1.5 inch Acacia butcher block tops. Everything is super sturdy and well made, and the solid wood is beautiful. Have been using these daily for about 5 years without any issues. Would recommend.”

“I have an UpLift desk (roughly 4 years now) and it’s been great!”

“I got an uplift desk frame, and bought my own top (ikea butcher block). Works great for me and my home office set up.”

“At 44"+ the only thing that matters is whether the frame has a crossbar between the legs. Without one, everything wobbles. Full stop. Uplift V2 Commercial has the crossbar. Most stable desk I've used at standing height. 15-year warranty on frame and motor, which tells you they trust it. FlexiSpot E7 is close - C-frame is inherently more rigid than T-frame. Usually $150-200 less. No hands-on with the Vernal so can't speak to it. One thing that fixed 80% of my wobble - push the back legs against the wall. Also a clamped monitor arm adds way less shake than a freestanding stand.”

“Technical writer here who’s been WFH for years. Go electric. You will absolutely not crank a manual desk up and down 4 times a day, so it’ll just end up becoming a permanent sitting desk. Uplift V2 Commercial. It’s rock solid with multiple monitors and has a crossbar that kills the wobble you’re worried about. If you want to save some cash, the Flexispot E7 is the solid runner-up most people here swear by. Standing for 12 hours sucks too. Your feet will just replace your butt as the source of pain. Alternate every hour to actually fix the back issues.”

“Bought an uplift a few weeks ago. I love it. 60x24 worked best for my room. A lot of the tailoring decisions depend on a lot of things catered to yourself. I chose 1 grommet and 1 power grommet so I can charge or plug things in on my desk and feed cords through the other. Got monitor arms, did a tray under the desk for my laptop to be stored. I purchased an under the desk CPU holder that doesn't work well on a 60x24 desk so I sent that back and grabbed a side shelf for my desktop. It's not cheap but the customizations were great and I loved the 3D model so you can see what the desk will look like as you're building. I programmed the heights and have gotten in the habit of standing for meetings, can press the number for my preset and it just goes up and down to the height on want. I chose laminate top as color mattered more to me than material. I plan on getting a mat to keep my work area clean as I sometimes need to eat lunch while i work.”

“Uplift Desk, I used it from 5 years ago”

“Trash. Standing desks from Amazon lie about their weight capacity, features and quality. Not worth it. Check out Desky, EffyDesk, Vernal, Flexispot, Autonomous, Flipdesk, Uplift. They all have sales at times. If you don’t wanna spend $800+ on a great standing desk then buy the motor from these brands I mentioned and get a wood tabletop from ikea. My top two in terms of quality are Desky, Vernal and Uplift but they’re also he most pricey. Also checkout Source Furnishings they’re a wholesaler in Canada. I got the 30 x 60 executive standing desk. It’s amazing.”

“Not really. I’m speaking from experience because I sell products on Amazon myself through Facebook, and I have dozens of different products listed there. I used to sell our central daily, so if you make an unverified claim or lie about your listing, the worst that can happen is your listing will be taken down. You probably won’t get sued for it. Another thing to realize is that many consumers won’t even test that weight capacity. The average consumer isn’t overly concerned about specific details, but they do sometimes lie about them. I’m not saying that 100% of listings are dishonest about claims such as weight capacity or standing system, but Amazon does care a lot about edible products and the claims made for them. For example, I sell supplements, and if I lie about them, it’s a serious issue because they’re edible products and could affect someone physically. Amazon has stricter standards for edible items. Regarding standing desks, again, it might not exactly be 270 pounds if they claim that, and the quality might not be perfect. If you want a standing desk, go for the companies I mentioned or check out the wholesaler I mentioned, they’re based in Canada. These companies offer great warranties, easy assembly, and there are many reviews on YouTube and Reddit. That’s why I trust them more than buying a standing desk from Amazon. If you don’t want to spend too much, the IKEA one is your best option. Honestly, it looks very nice, has good quality, and will get the job done.”

“Lol. This is a dumb comment. Any standing desk below $400 is usually not great quality and wobbles heavily. The ones on Amazon for $150 are complete plastic and the motor isn’t as strong and quiet. They’re very cheap quality. With standing desks generally the more you pay the better, but the material matters a lot. Anywhere between $500-800 is a good range, and $800-1500 is the ultimate range usually solid wood and thicker than 1inch, from reputable brands and they have the best motors, weight capacity and warranties. I suggest Desky, Autonomous, Vari, Vernal, Uplift and EffyDesk. Uplift and Desky are the best since they have the most options and customizations and they have the best customer service and warranties.”

“Tbh any standing desk that’s from a reputable brand won’t wobble at sitting height but almost all do at standing height. The only ones that don’t wobble are 4 legged standing desks and uplift makes them. They’re pricier but they are super strong and have a crazy weight capacity. Uplift has the most customizable desk as well but they’re a US based brand and might have duties if you live outside the US. Desky is the most popular standing desk brand and I’ve bought a lot things from them. They have great customer service and fast shipping. If price isn’t an issue go for Uplift or even Oakywood since that can be customized too and Oakywood makes the best wood products and desktop. Whatever you do don’t get MDF desks since it’s basically particle/chip board material. It’ll be difficult to screw accessories to them. Go for solid wood, it’s pricier but more durable and you need at least a 1 inch thick desk but I recommend 1.5 inches.”

“Not sure how this is related to Bloomington-Normal, but I have an Uplift as well. I got the light Bamboo. It’s nice. Ordered during a Black Friday sale one year to get discounts and free stuff.”

“I love my uplift desk. I have a much smaller / cheaper one at work that is pretty good too…”

“thirding! OP should also look at used office furniture dealers if they're in a major city. I got my uplift desk at a place like that at 60% off retail, and it's a bigger custom model with real wood top that isn't sold on uplift's website.”

“I’m sure the cost is one reason. They are great desks, but are more expensive for sure.”

“I have no wobble on my desk”

“Uplift, I think the v2”

“Our first standing desk was from Ikea and was a huge mistake. It broke after about 3 months and Ikea wouldn't honor the warranty. We eventually went with Uplift desks and I don't regret it. Mine is about 7 years old and still in great shape. Whereas every cheap desk I've ever had started sagging by now, the Uplift works great and really might turn out to be BIFL.”

“I love my Uplift desk! Worth every penny”

“I just bought the legs and did my own top. Way cheaper. The uplift desk is bulletproof and will not disappoint.”

“I got a used uplift with whiteboard top (which I don’t want) but it came with monitor arms and caster wheels. VERY IMPRESSED with build quality of it. Will replace top at later date. Paid $390 for what was a $1200 setup.”

“I got a used Uplift for $380 ; 60x30 with lockable caster wheels and x-range dual monitor arm from Facebook Marketplace. There are deals to be had, you just need to be patient or willing to drive a bit to buy.”

“I love my uplift 60x30. No regrets”

“The two-leg Uplift desks are much heavier than you're imagining, stiff and very stable. Now if you put it on tall, soft carpet then it may wobble, but the 4 feet that actually sit on the ground would likely sink into carpet enough to stabilize it. NOTE: both the two and four-leg desks still only make contact with the ground at the four pad feet. The two-leg is just as stiff as the four leg, so any wobble will come from the surface you set it on”

“I have had an Uplift desk for 7 years now that I raise and lower daily (for an under desk treadmill) with zero issues and I would buy another if this one dies.”

“Stability is the right thing to focus on — the gap between desks in this regard is genuinely large and easy to miss in reviews that don't test under load. A few things that actually predict wobble vs. solid feel at height: Frame gauge — wall thickness of the steel matters a lot. Desks that don't publish this spec are often the ones people end up disappointed with. 2mm+ is what you want for heavy setups. Dual-motor vs single-motor — for dual monitors + laptop you're adding real weight, and single-motor frames tend to flex and vibrate more when raised. Dual-motor will feel night and day. Crossbar between the legs — some frames skip this to save cost. Under a heavy load it makes a noticeable difference in lateral sway. Max height vs. stability tradeoff — desks that advertise 130cm+ max height usually sacrifice some rigidity to get there. If you don't need extreme height, a desk capping at \~120cm will feel more solid. Desks that consistently hold up well under your kind of setup: Flexispot E7, Uplift V2 (or V2 Commercial if budget allows). The ones people tend to regret with heavier loads are usually budget-tier single-motor options. What's your budget range and do you need a specific height for standing?”

“You could get the quality of a really good brand like Uplift by buying just the frame and then making the top from wood from the hardware store. A two leg frame from uplift is $470 and then spend $100-200 on making a top. Its the legs of the desk that matters the most. If you are afraid of making the top, you could see if IKEA has a table that would work for you”

“I got an Uplift desk because I tried out some other brands and most desks when at a standing height wobbled too much or had noisy motors. I did not go with the fully custom top but went with a solid bamboo top for about $1800. One option you could consider is only buying the frame from Uplift and getting a local top made to your preferences. If you can get someone to make you a top for less than $1500, you would be saving money.”

“The Uplift desks can certainly hand the weight if you go with a solid wood desk. I am not sure about the particle board tops. I can sit on the top and the motors don't even seem to notice the weight https://preview.redd.it/jb13pddqwsig1.jpeg?width=4000&format=pjpg&auto=webp&s=5fe3bf2145cedb1a54b8cdae70b9227765f1590b”

“I would recommend getting a standing desk and spend a little extra if you can afford to. The cheap desks will end up being replaced soon. Also check the standing height of the desk you buy. I am 6' and there are some that dont go high enough to feel comfortable while standing. I got an Uplift desk for the height as I am also using a treadmill at my desk.”

“I have not owned a Jarvis table but I did look at one at a hermin miller showroom. The display that they had seemed to wobble a bit, but that could be because it was a display model. I ended up going with uplift as I could get more options and people said it doesn't wobble that much at full height. I really do enjoy my Uplift desk and I am glad that I spent the extra on it.”

“You could go the way I went by getting an Uplift frame for $550 to $799, and then get a top made locally. For the three monitors Uplift has a three display arm. I have a 34in ultrawide and 2 24 in monitors on a single arm. I had posted my setup here https://www.reddit.com/r/StandingDesk/s/XBQlRhOVeg”

“You could go the way I went by getting an Uplift frame for $550 to $799, and then get a top made locally for $250ish. For the three monitors Uplift has a three display arm. I have a 34in ultrawide and 2 24 in monitors on a single arm. I had posted my setup here https://www.reddit.com/r/StandingDesk/s/XBQlRhOVeg”

“I run a tripple monitor setup on an Uplift v2 desk with a treadmill and it barely wobbles, it is only noticeable if you are really pushing on the desk at full height. I would recommend getting an L-shaped desk as it will wobble less. The v3 desk is supposed to have less wobble. https://preview.redd.it/41ejjkg8hcug1.jpeg?width=3000&format=pjpg&auto=webp&s=0b517389f4322a1b41fdcebdaf099fb32e474257”

“Same and 100% agree with all of this. It really is a great desk. Had a manual crank standing desk before which was smaller but also worked great. You definitely want a cross bar on the legs for the smaller/cheaper ones for stability. The Uplift doesn't have one but is stable af.”

“The two legs don’t wobble I have 4 of them up to 80“ wide all on the c frame no wobble at all!”

“I have an Uplift desk I've used for nearly a decade now and I've been happy with it. They have some addon options for cable management and I got a little drawer attachment for my accessories.”

“Just an idea if you have the space, look into a UPLIFT desk frame and an IKEA counter top like KARLBY. Comes out a little less money and looks 10x better.”

“I love my UPLIFT desk, and I'll always sing their praise because of their support. I moved after 2 years of having it and when taking it apart i broke one of the motors. Instead of making me pay around $120 for a new motor they just sent me a new one, I was shocked. If you really want a wood top, go with just the frame and then order an Ikea KARLBY countertop or another butcher block counter top.”

“Uplift is great(I actually have one)but are you sure you need a four leg one? The two leg ones hold a decent amount of weight and are about half the price”

“I have an Uplift desk that I bought in 2019 or so. It's a smaller (48 inch?) V2 Commercial with the crossbar frame and curved bamboo top. Originally used in a very small office, I've since moved it twice and used it in 2 other spaces. I use my desk with the Uplift Bamboo keyboard tray and 2 of their Range monitor arms. Occasionally I wish I had a longer desk top, but I've easily accounted for that by putting a drawer unit at one end and a table at the other to extend the surface area. I don't need longer space when standing, just for general stuff like speakers and the cat bed. I have the 4-position memory keypad, which is really useful since I have 2 chairs at different heights, plus a standing height and I can program them all in. I absolutely love my desk, it's comfortable, stable, and does exactly what I need even with a pretty hefty load of 2 large monitors, 2 small monitors, laptop, and keyboard on it. There was a small issue right after purchase when the cat damaged it, and their customer support sent a repair kit. The only other problem was the motors getting out of alignment after one of the moves, and it was easy to reset following their published online procedure.”

“uplift is pretty solid and quiet. their customer support is great. they have a bunch of options and accessories for different types of workstations”

“i have an uplift desk and i love it - being able to dial in a specific height is a serious ergonomic boon, which matters a lot if you’re trying to achieve creative flow and not get distracted by discomfort or whatever. if you’re concerned about the mixing use case, you can always use the desk memory to return your desk to the same height you calibrated it for mixing at.”

“I have the uplift desk and love it”

“I got the Uplift and it’s been great, no complaints.”

“Honestly, Wirecutter’s picks are solid and the Uplift V2 is super sturdy and customizable, and the Branch Duo looks great for the price. But if you want something quieter and smoother, I’d check out the Fully Jarvis or the FlexiSpot E7 Pro. Depends on your budget and how much you care about cable management tbh.”

“Really, if you're going for most brands, I would recommend going for their mid tier range of products and not their cheapest models. For Uplift, I'd go with the V2 or V3. The V3 has better stability at standing height and faster motors. Memory presets actually get used more than you'd think when you're adjusting multiple times a day. Flexispot E7 is a lot cheaper than Uplift, and people don't really complain about build quality as long as you stay E7 or above. Below that, you start running into issues. There's also the Desky Dual Laminate Sit Stand Desk if you want something between those two on price. its dual motor and has a 300+ lb capacity.”

“a standing desk can make a big difference if you work long hours. alternating between sitting and standing helps with posture and fatigue. flexispot and uplift are common choices, just make sure to check the frame stability and motor noise. tools like dezctop focus on stability and workspace design with thoughtful cable routing and modular organization so your setup looks clean and feels balanced while working.”

“I have a four leg Uplift and love it. Super solid. I also have casters which I highly recommend.”

“Secretlab Magnus Pro is hands-down the best if you want real cable management.. built-in routing, hidden power bay, super clean look. Uplift V2 with the full wire kit is a solid modular alternative. Both keep things tidy without endless zip ties.”

“I have 3 uplift desks for about 5 years, I like them.”

“I have an uplift desk and it’s so awesome. 10/10 would recommend if it’s in budget.”

“My uplift is awesome. Total game changer for WFH.”

“Nope. Solid. And I’m on carpet.”

“Same here. 3 years. Works perfect all the time.”

“I’m on year 6 of my uplift. Highly recommend it. Get the wider 60 or 72”. I went with 72 and I have plenty of room. Zero complaints or problem. Plan to spend a little extra time, figuring out where your cords go. I bought some nice cord straps from Amazon to do a better job of securing them. What was included in my package. Also, if you have the budget, splurge for an upgraded material. I got the reclaimed fir and I really enjoy it. We also have one in the basic bamboo and it’s very nice as well.”

“Oh ya, game standing too. Backs fucked at this point so it's kinda needed. I think it's also the aforementioned Uplift with a custom top from the tradeshow company I used to work with. I have my monitors on some 6" or so stands to keep them at ear level.”

“I cannot say this enough, but if you haven't done so already, check your local online marketplace. You would be amazed at what you can find sometimes. I found a V2 for less than $50!”

“How much weight and the whole drive assembly. My nice uplift and Jarvis have the actuators in the legs. My wife’s 250 Amazon one has a motor with a driveshaft that sits under the desk. My 6ft uplift came with a hammock I can sleep in under it. It’s solid and stable. I’ve got an ultrawide and a bunch of flightsim stuff on it. That said, those cheaper ones aren’t half bad for what they are. The wood is much cheaper but nice. Uplifts base level bamboo is a big step up, but it’s also a ton more money. My wife had no complaints about her $250ish one.”

“I’ve had an Uplift v2 for nearly 3 years and easily the best office equipment I’ve invested in. Back pain and neck pain went away. No real complaints since purchase. Highly recommend if you are willing to invest ~$700+”

“Sounds like it’s safer to keep the printer on a stable fixed surface but have no issue with somewhere just under 300lbs on my my uplift. Just got it”

“Don't ignore the secondary market. Yesterday I just bought a 1.5 year old four legged Uplift desk with a 1.75" inch thick 60x30 inch solid wood desktop (approx $2450 new) for $650 from Facebook Marketplace”

“After doing a lot of research which included lots of great info from the smart people in this sub I set my requirements; at least a 60x30 hardwood desktop for durability and four legs for stability. I’m very fortunate that I didn’t have to scrimp on price but also didn’t want to spend more than I had to. I was planning buying a Flexispot four leg base, ~$650 on sale and buy a 60x30 butcherblock countertop from Home Depot for $150. The countertop would require finish sanding and some sort of finish; I was planning on using a nice oil that I liked. So roughly $800 and a little extra work on top of assembly. I started checking out on eBay, Facebook Marketplace and other secondary markets. After a couple of weeks I bought a slightly used Uplift desk, one of the best brands on the market that matched my requirements exactly. Four legs (and four motors ) and a 60x30 1.5” thick solid hardwood desktop. This thing is as stable as a regular desk or a dining room table. This exact desk sells for $4800 new, I got it for $650 less than 20 miles from my house. The only down side was the desk weighed approximately 350 pounds so I paid a couple of strong guys a few bucks to lug it out of our van and upstairs to my office.”

“Buy a quality desk with a sufficient weight bearing capacity and you’ll have no problem. My Uplift desk will support approximately 500 pounds. A cheap desk might support only 150 pounds. You get what you play for.”

“I have an Uplift desk. Fantastic.”

“I went with the ash. Have had it for about 2 years. It has held up great. I WFH so I am a heavy user. Also, I love the foot hammock!”

“I went ahead and bought an uplift lol”

“I ended up being a normie and bought an uplift desk instead.”

“I’m 5’3” on a good day (but have short legs) and have a desk from Uplift Desk - and it adjusts from about 23” to a little more than 48” - super flexible. On the chair front - go somewhere with a decent selection and try a bunch of of chairs out to see what works for you - even if you pick one up second hand. I really like the Herman Miller Mirra or Embody, but there are lots of options with a pretty good amount of height adjustment that should allow your feet to touch the floor.”

“I bought an Uplift (fairly expensive) and really like it. I wanted something large so that was a limiting factor. I alternate between sitting and standing as my body feels the need. I imagine there are good, lower cost options. Worth it imo.”

“Uplift. I like it but can't compare it to anything.”

“I think uplift is the only real choice, they are the gold standard for desk and their warranty is 15 years, no one else even comes close. You can also choose to upgrade the warranty to 25. You’re guaranteed a desk that will work for 15 years minimum. I have one and while expensive, it’s simply the best choice.”

“While it does seem like at this budget you might as well just shoot for the moon with DeskHaus, Uplift is very solid and would not be a mistake imo. I would probably go 4 leg if you really use this at standing a lot, just for max stability.”

“I have the same setup! But just one desk. I love it, plenty of room and beautiful to look at”

“Im about to get an uplift v2, they're supposed to be incredible. Study, highly customizable: Size Shape Material & color of: -the top -the frame -the keypad to control the height adjustments -the casters No I don't work for them/ am not being paid to say this, lol. Im just super pumped about my new desk. (That I'm deciding on customization for now, but in my brain Its already mine) :)”

“I DOOO love my desk, its amazing... but no, it certainly doesn't have this feature. I've made great use of the two 15" shelves that clip oh the back of mine for music production gear, as well as two clamp on studio monitor stands - with the hydraulic monitor arm i have a TON of space on my desk even though I have all my gear right here in front of me! :) I know this irrelevant to what this post is currently looking for but I just wanted to talk about how cool it is!”

“Love uplift. And when my control unit went haywire they sent me another one for free! Great service.”

“I have 3 desk from Uplift and have been happy with them. They are very sturdy, have held up well to abuse from children, and I think they look nice. My kids all use them every day and they have just held up. I’ve some cheaper $100 “from Facebook marketplace” desks I use for random projects and the are uniformly shitty.”

“I own 4 Uplift desks. They are all fantastic (me / kids / etc). They have all held up very well, taken endless abuse and just keep working.”

“I’ve been very happy with my Uplift desks. They show up cheap on all the local Facebook Marketplace groups.”

“I built a custom desk using the industrial legs from uplift. They stand behind their product as I've had to replace the feet/casters a couple times due to damage from moving cross country. My desk is made from butcher block and weighs around 100lbs just for the wood”

“My telescopic Uplift is very stable, and that aspect of it is noted as better than others in the Wirecutter review.”

“Desky and uplift are both solid frames, I think you'd struggle to tell them apart. I think the desky cable management is better than the uplift offering, as it's a solid metal channel that runs the length of the desk and clips into the frame as opposed to a bit of looped fabric on the uplift. Source: I have cable ocd.”

“I had the 2 leg version and it worked fine. You just have to attach your speaker monitors to the desk so they rise with the desk for your listening position.”

“I'm using an [Uplift Standing Desk V2](https://www.upliftdesk.com/2-leg-standing-desk/?4275=4865&4276=4654&4279=3821&27944=20608&4280=11390&10958=8704&14905=11667) with the C frame. When I got it they were still reasonably priced, but I'd say if it's in budget they make good stuff. I recently helped a friend with their [Desky](https://desky.com/) and the quality seemed really good and their customer service team was really good. They were also one of the few that could get a L shaped desk with a low enough setting for her shorter seated height. Both Uplift and Desky also were some of the few that hard a deep enough desktop, 24in deep seems to be pretty standard but we both wanted 30in. Whichever desk you end up with, I'd recommend splurging on a control pod that has preset one touch memory options. Having to hold the button down, even on a preset, for the entire time the desk is in motion gets wearisome. It sounds trivial (and yeah it kinda is), but if you're constantly changing the height of the desktop it will be something you have to deal with each and every time. My work supplied desk is like that and it drives me nuts. I can't say I use the standing desk at home or in the office for standing as much as I do seated, tho it does get moved in to that position from time to time. Really my main reason was getting it so that my seat height was correct for me. I always found desk heights to either be a too high or too low situation and being able to customize the height to a just right level was a god send. After having to get carpal surgery on both wrists, I really started paying a lot more attention to ergonomics and do not regret the cost of a proper desk, chair, monitor arms and keyboard one bit after the fact.”

“I love my uplift standard shaped desk, but they can get very pricey for the L shaped. I'd take a look at Desky as well as the others. Helped a friend get an L shaped from them and only have positive things to say about the experience.”

“Love me a good standing desk. When I was WFH I had/have a Uplift, and thankfully got a similar sized standing desk in the on prem office as well. If you're looking for a standing L Shaped desk, I'd look at Desky. They're a lot less expensive for their L shaped (or at least were last I checked) and good quality. Between the height adjustment of the desk and getting monitors up on arms, my comfort levels are so much better.”

“Also have an Uplift desk (2 of them actually). Both the v2 model with walnut top. Have had them both since mid-2020 and both are fantastic”

“Not sure what you’re worried about with uplift, they have a great reputation. I’ve had their commercial C desk for years. With v3 all of their desks go down extra low. I would like another one, but I don’t want to pay that much so I’ve been looking at what else I might be able to get or see if I could find one used.”

“ugh the back pain is real, been there. honestly go electric - manual crank desks sound fine until you're adjusting multiple times a day. what worked for me was getting a desk with a crossbar for extra stability. i've been using an [UPLIFT V2 Commercial](https://www.amazon.com/s?k=UPLIFT+V2+commercial+standing+desk&language=en_US&tag=bestdeals202f-20&ref=as_li_ss_tl) for 3 years and it doesn't wobble even at full height. start with 30 minutes standing per hour, your body needs to adjust. also get an anti-fatigue mat, trust me on this.”

“Uplift - can program different heights, honestly sometimes i just use it by going up or down an inch or two, and it's a beautiful desk. Got the commercial one so i could go down really low and rest my feet on the ground.”

“I’ve had all 3. In my opinion the Uplift was the sturdiest by far. I have the 89x30 with the heavy butcher block top. Screens don’t wobble at all at standing height. Just make sure that the monitor stands you have are robust though as that is also a huge factor. I’ve 3d printed a ton of add in’s for it. I was able to save a boat load of money since uplifts accessories are wildly expensive. I even put my ~50 point water cooled gaming pc on it with no issues at all.”

“I have an uplift and simply lovin it”

“I got really lucky. I was randomly looking on OfferUp, and I noticed someone selling an Uplift V1 three legged desk. I ended up buying it for $400, and they said they paid around $1,500 for it new. It’s great, and it has all of the bells and whistles. You really have to look for any kind of wobble; there is only a very very slight one that I’ve seen so far at it’s highest setting when I really bump into it, but every desk is going to do that probably m. If you’re in Southern California, I think they have two more they want to sell.”

“Don’t buy tables with that leg configuration. They vibrate with just typing and is transmitted a lot to the monitor if you don’t have it leaning against the wall. I wish someone had warned me.”

“I just got one and it's full of fingerprints - would not recommend.”

“Many of these standing desk company seduce you into a workflow you may want, but may not actually do. Sort of like a gym membership. Manual is realistically fine for most people and saves you a lot of money. Even Ikea has manual ones that are cheap and perfectly fine. I spent a lot of money on an Uplift desk nearly 5 years ago, and I barely use the standing desk features.”

“Get the base/legs from Uplift, and a desktop of your choosing. I've heard bad things about the Uplift desks, but I bought the legs and attached them to an old butcher block I had and it's glorious.”

“Most people buy the base and top separately for a number of reasons. Aesthetics, sizing, already owning a top that you like, etc. common places to buy are IKEA, Home Depot, Lowe’s, local lumberyards, etc. my top is actually from old seating booths from a restaurant that went out of business. Got it for like $10 and it’s 72” wide x 24” deep x 1.5” thick actual wood. Built far better than anything uplift has.”

“Unless you happen to already be the perfect height to get good ergonomics out of a standard height 30" desk (which is about 6'2"-6'4" depending on the relative length of your legs and torso) a height adjustable ("standing") desk is non negotiable. Good seated ergonomics means feet flat on the floor, monitor at eye level (either center or top of monitor at eye level, somewhat preference based, but you don't want to be craning your neck upwards), and forearms parallel to the floor with elbows on armrests while typing (including gaming). For most people under 6'0", this requires a desk height of 26-29". Standing desks often only use two legs with wide feet to keep costs down, but this introduces some instability / wobble that can be annoying during gaming and get worse with wear over the years. I have a decent two legged standing desk right now (uplift) but if I could upgrade to a true rock solid BIFL option, it would be an uplift four legged desk with a thick and durable butcher block top. The wobble of the two legged support system and chips/scratches on the desktop (I got rubberwood laminate) are the two main issues I've noticed in the 5 years I've owned this one.”

“that setup your friend made looks super clean. if you’re not into DIY builds, look for desks with solid wood tops and dual motors because they stay stable when raised. uplift and flexispot are fine but start to feel generic once you’ve seen them a lot. mid range options with real wood and cable trays make the biggest difference. some folks I know switched to dezctop since it keeps that custom vibe but arrives ready to go with built in cable routing, magnetic trays, and shelves that click in so you can tweak the layout later.”

“If you’re tall and using anything other then the highest end rock solid desk (I use an uplift v2 commercial; it’s generally considered pretty decent and stable by most users), even a great vesa arm will amplify wobbles on the desk, and that desk *will* wobble just a little bit when at full height if you’re tall. For me, this meant the display jiggle just a little bit when I typed, and drove my crazy over the long term. I ended up finding relief with a super heavy metal stand meant for ultrawide displays but paired with my normal boring dell 27”.”

“It is absolutely worth it for me. I have been working fully remote for about 6 years now. I would say that brand is NOT the best decision point to follow. Even some good brands with quality builds don't hold up well in certain situations. I started with an uplift desk, and the build quality was decent but the desk wasn't stable enough for me and there was a significant wobble when standing if I wasn't extremely careful. The brand I highly recommend is Deskhaus. I purchased a new desk from them on 2024. High quality desk and their customer service was excellent. The owner is active on their sub and they have a lot of videos posted showing comparisons. The most important factor for me was the stability. Even with the desk at the max height I can lean into the desk with my full body weight and my monitor arm doesn't even shake. Currently trying to sell the uplift desk.”

“Most of the actual frame components are nearly identical. Commodity quality motors, gears etc. As others have said the monitor mount and top material are where you will see the most difference. I have a VIVO Amazon one with the bamboo wood tip and it's excellent, better than the expensive uplift brand one I have at work.”

“I have the 48 Uplift, and I have to say, I’m not so impressed. Build and everything is decent, but at standing height the table wobbles a decent amount. wow a lot of people love uplift and this is probably my first time hearing a negative comment about uplift. how much did you pay for ur uplift? maybe try fully or autonomous. my colleagues don't like vari desk much”

“Here’s how I see the standing desk market right now, in January 2026. “Amazon Specials” like Claiks, ErGear, HUANUO etc. - Primary consideration: Budget. These are frankly total trash, probably even worse than the cardboard boxes I used for my first few years of standing. Flexispot - Primary consideration: Value. Buy here if your first consideration is budget but you don’t want garbage. Stick to E7 and above. Secretlab - Primary consideration: Cable Management. Buy here if you’re a gamer and/or you just can’t stand to see a cord. Uplift - Primary consideration: Corporate Sales. Buy here if you’re a purchasing manager (at work or at home). No one ever got fired for buying IBM. DeskHaus - Primary consideration: Stability. Buy here if you want to absolutely annihilate any and all wobble or sway, or if you need to support a massive desktop. Branch - Primary consideration: Apartment Chic. Buy here if your home office is also your living room. And where we think we fit in: Ergodriven - Primary consideration: Ergonomics. Buy here if you actually want to use your standing desk. That’s the need we identified. While these brands have innovated around the edges, no one has actually improved the ergonomics of standing desks in 10+ years. We all know the true benefit of standing desks isn’t just standing - it’s movement - both while you’re standing, and in changing positions throughout the day. Experts recommend switching between sitting and standing 20+ times per day. For example, the human ergonomics program at Cornell recommends the 20-8-2 rule: in every 30 minute period, sit 20 mins, stand 8 mins, and move/stretch for 2 mins. That is a lot to manage, especially when you have work to focus on. It’s 2026. You shouldn’t be relying on willpower or setting phone timers to remember to use your expensive desk for its only purpose. Your desk should monitor your presence and position, and automatically move for you. That's what we think anyway. So that’s exactly what our Tempo Desk does. It’s the only standing desk you’re guaranteed actually to use! And so far people love it! You can see reviews on this page . BTW if you already have one of those desks above (or have your heart set on them for the totally valid reasons I listed), you can still get our Tempo controller and just swap out your controllers in a few minutes (Tempo is compatible with all the brands above - and many others - except the “Amazon Specials”).”

“At places like Flexispot and Uplift, you can always purchase the L frame and then get two of their 30" depth desktops separately, you would just need to drill your own pilot holes. If you are ok with at least one side being 30" deep, Uplift's is 30" deep on the main side and 27.5" on the return side. If you want 30" depth on both sides with no extra drilling, Progressive Desk's L desk has some size combinations with 30" depth on both sides. If you aren't happy with any of those, you can also try getting the frame from wherever you want and then getting a local woodworker to make the desktop to your exact specs.”

“whoops it’s a v2! here’s a picture of it, i swear it’s real lol https://preview.redd.it/yazjur8qrbjg1.jpeg?width=3024&format=pjpg&auto=webp&s=21d49247017ce5a12dea142852847364d9fe90f6”

“I recently moved to a bigger apt and i spent days researching which desk to get, without any real result, so I figured that I’d put this up for anyone in the same boat! The Goal: I previously had an Uplift V3 but i never felt like i had enough space, especially in depth. Being too close to my monitor meant more eye strain, which was starting to really mess with me. My hope was to find a motorized, large, L-shaped standing desk that was stable and wouldn’t shake too much when i walked on my underdesk treadmill. The Specs: I narrowed it down to 1. Vernal Core 3 L-shape—This desk is 79x71 with a depth of 29.5 on the main side and 27.5 on the return. The cost before discounts or accessories was $859.99 or 2. Uplift L-Shaped Laminate Standing Desk—the comparable size was 72x78 with a depth of 30 on the main side and 27.5 on the return. The cost before accessories or discounts was $2079.00 The Choice Obviously, the Vernal appealed to me more because of the price point, but i couldn’t find any reviews that felt thorough and reliable. I was concerned about the stability and the quality. Having owned an uplift (though my V3 was a solid wood top and this L-shaped on would be laminate as the solid wood L desk starts at 3500), I knew I could trust them to deliver what they said they would. In the end, I decided to pull the trigger on the Vernal desk and was SO shocked by the quality of it that I had to write this review to save other people the heartache of looking lol The Result: Again, I’ve owned an Uplift. I don’t think the quality is much different at all, and I think the L-desk’s laminate top would narrow that gap even further. The motor sound is exactly the same, adnd the desk is completely stable when I walk! I was actually MORE impressed by the Vernal’s instructions, ease of building, and little bonus touches that I was with the Uplift. The details: Small things, but I like that the Vernal motor control sits along the edge, rather than under the desk like Uplift’s does. Verbal provided much better cable management without any upgrade accessories. Vernal provides little rubber stoppers for the big O-shaped breaks in the supports, as well as a screw sleeve to keep you from losing the screws during building. The instructions were incredibly clear and even included a cardboard box of extra tools in case anything went missing. The holes in the desktop (where you could put circular power strips or a cupholder) came with plastic covers with a swivel slice opening to allow you to pass cables through. Okay, I think that’s it! Hopefully this helps someone and I’m happy to take questions!”

“Deskhaus Peak Pro Flexispot E7 Plus Max Uplift V2 **Standard** Four Leg. I think stability difference is unmeasurable between the options. The list isn't in any particular order.”

“I have the 4 leg V2. I figured buy once and cry once with this much equipment... I'm not sure on the weight. Monitors should be about 35-40 lbs. PC maybe 20? It's nothing unusual. This is my monitor stand, no weight listed: Hex 23" to 32" Monitor Desk Mount – VIVO - desk solutions, screen mounting, and more https://share.google/t8jPwAuEUzsIcpVZq All the misc junk on my desk, maybe an occasional cat? It certainly never struggles, but going from sitting to standing always gives the H01 code, and it will not move again for ~20 minutes.”

“Well I just had an uplift v3 delivered. 80x30. Will report back in a bit on how it’s going”

“Yes, I have the V3, and I bought the modesty panel. I can’t figure out how to make the modesty panel work because my monitor arms are the clamp style. Uplift customer service was excellent in responding and they recommended that I put the monitor arms at the ends of the desk so the mesh panel would slide into the bracket but in doing that, it appears you would lose spots on your extension plug or at least make accessing them extremely tight if the extension cord(s) are mounted directly to the frame. They mentioned on the modesty panel that one could mount it 2 inches from the back of the desk, but obviously, you’d likely lose the hanging wire basket in doing so. Not sure if you found a way to make the modesty panel work on your V3… but I’d be interested to know. Tyvm”

“The Uplift v2 24"depth commercial frame gets to around 13" of clearance per their 3d model file, but it does have a crossbar that some people do not love. You could get their V3 frame, shift the frame towards the back of the desktop, and drill your own pilot holes, but that may cause clearance issues with the grommets and cable manager. A cheap/simple solution is to install a keyboard tray to the desk you just got. They are usually thin, brings the keyboard to the ideal height, and provides knee clearance. If you are not a fan of keyboard trays and your desktop is sturdy enough, you could try getting lifting columns individually, like from Progressive Automations, and put them on the corners.”

“I haven't used the v3 yet, but I've used the v2 and the e7 plenty. I'd say the difference is not worth it.”

“BTW in case you’re interested our [Tempo Controller](https://ergodriven.com/products/tempo-smart-controller-for-standing-desks) works with v2, v3, e7 and e7+”

“I have a 8 year old v2. 6' long with a plain white top. It's more of a workbench than desk. No frills, it just goes up and down when I need it to.”

“Sorry but that's a low budget. Any desk in this range will wobble will only a little more load on top. Plus it won't last long due to the cheap parts (where do you think the low budget goes?). Honestly it's not worth buying something for this price and after sometime you will be saving for buying another of the same, whereas if you save a little now and buu a better one which will last longer. It depends on the load you have, first of all a single motor standing desk doesn't make sense to me. If you can increase your budget definitely get a dual motor desk and I'd suggest flexispot E series which is not too expensive like the uplift and performs way better for it's price point. You can read about dual motor desks, why they are better and what you need to watch out for: https://thewarrantedchoices.vercel.app/article/best-bifl-standing-desks-2026”

“Do you care about speed, weight capacity, or want a premium top? If not I'd suggest you look at the FLEXISPOT EN1 on Amazon. I had an Uplift, recently got rid of it and switched to Flexispot and for just over $100, it's just as good for my needs. Uplift was faster going up, but you're talking about a few seconds, and it could support more weight, but that would never be an issue, and it's more bulky/heavy. I also have back issues, which is why I got one too. It's not likely to solve your back issues, but it definitely feels better to switch between sitting and standing throughout the day.”

“I am 6'1 and I rarely use the desk at max height, but I have an Uplift desk that maxes out at 48.7" with a treadmill. If you are worried about it, you can get wheel casters for your desk which will add a couple of inches to the max height.”

“Uplift and Flexispot were fine but Dezctop kept things look clean long term. Has built in tray and vertical board kept all cables and accessories off the surface. Focus on desks with real cable routing instead of the basic mesh nets most brands use”

“as someone who just did this same calculus (though on about half your budget) i'll say the stability is overrated for a lot of people. like who is truly leaning on their desk that hard? though with an 80x30, it might come into play more than the average soul. that said, I did ultimately go with deskhaus. they had a good deal going with a free top at the time i ordered, i appreciated the company's transparency about their products, parts, and the longer warranty. plus i like a little guy. uplift and flexispot have many product lines, and operate on a more mass-market scale, which is both good and bad. deskhaus makes and maintains one thing, which is desks. budget doesn't seem to be a big issue for you, so for the same amount of money you'd end up with a slightly more stable desk with a longer warranty. but if you don't live in the US (shipping), or want a package deal with lots of compatible accessories (the good part of bigger operations), no reason not to go with this one!”

“In my opinion, single motor desks are more prone to issues as they have to have some sort of differential mechanism for the side without a motor. My four legged Uplift has four motors and it’s so quiet and smooth. BTW, a two legged Uplift v2 desk has a 355 lb weight capacity and a four legged one supports 535 lbs.”

“I paid nearly $900 for my my UPLIFT desk. Granted, it is fantastic quality, USA vendor, and comes with a 10 year warranty. With that said, I don't use the standing option enough to justify the extra cost over a regular desk and mine wobbles too. So, don't feel too bad!”

“My wobble is very little, but the center brace definitely helps. My wobble is likely because I'm 6'1", and need the desk really high, haha.”

“It's all the same with slightly different tops. Uplift is fine if u avoid all the upsell crap.”