What Reddit says about FlexiSpot

“Yes, all three can handle your dual 27 monitors and keyboard. Uplift, worth it super sturdy, smooth, built to last premium price. Flexispot, great value solid performance at lower cost. Autonomous, good too check weight capacity for your setup.”

“Feels the same as the day I got it. Very stable. Motor functions exactly the same”

“Have had a Flexispot EN1 since 2020. Still running strong.”

“I have a flexispot adjustable desk. The en1. I bought some cable channel that sticks to the bottom and a tray to hold a power strip. A lot cheaper than that desk”

“At that price point, I’d look at Flexispot. I have the EN1 and like it a lot but I believe they have several models under $300. You can find some good options [in this thread](https://www.reddit.com/user/LegitimateReveal510/comments/1rwvdra/the_best_standing_desks/)”

“I got the FLEXISPOT Electric Sit Stand Desk 48 in Black Top a while back (holy cow, that was 5 years ago now, feels like 2)... Anyway, it's an amazing desk, solid build, and has been through 3 moves over the years. Still works great, and pushing buttons to have it go up and down is super convenient, mostly with how much junk I have up here (two 4k monitors, 1 sub monitor, monitor arms, mic on a boom arm, bookshelf speakers, tube amp, all kinds of clutter). I got the "FLEXISPOT Under Desk CPU Holder Mount" with it thinking that would be ideal but my PC wouldn't fit in it so I returned that. My new PC is even bigger and sits on the floor. Key to wire management is probably obvious, but be sure to set the desk WAY up to the mac then set up all your wires, ties, then it'll be good to go. My biggest regret - not going bigger. It's deep and I have a lot of junk on my desk, but sometimes I wish I had another few feet just to use for papers and stuff. The size I got it great for dual monitor and all, but then there's no "desk" space to toss things.”

“I have a Vivo and a Flexispot EN1. Both are solid choices.”

“Do you care about speed, weight capacity, or want a premium top? If not I'd suggest you look at the FLEXISPOT EN1 on Amazon. I had an Uplift, recently got rid of it and switched to Flexispot and for just over $100, it's just as good for my needs. Uplift was faster going up, but you're talking about a few seconds, and it could support more weight, but that would never be an issue, and it's more bulky/heavy. I also have back issues, which is why I got one too. It's not likely to solve your back issues, but it definitely feels better to switch between sitting and standing throughout the day.”

“I got a this for £100 on sale - perfect for WFH. Had it nearly a year, use it every day https://amzn.eu/d/2ikoyTa Wife got the same one, called something else branded as something else. Came in an identical box (down to barcodes and serial numbers) but hers cost £130 hah”

“I also own one from flexispot, dont know which one, i think it was the 2nd Most expensive. Theres the Tower and 2 monitors on it and the wobble is there, but its totally fine in my book. My desk is 180cm (6ft wide and 80cm deep.”

“Id say the Flexispot EN1 is one of the better budget options right now. its around $200, lets you save height presets easily, and is decently sturdy for the price”

“I think there is a sweet spot/middle ground. Idk if you need to spend big bucks though. I originally bought a 150 dollar single motor/stage no name desk on Amazon & I definitely got what I paid for. It was wobbly & loud, didn’t not seem long for this world if I used every day for work. 6-8 months later I ended up getting a middle of the road/budget dual motor Flexispot E6 Max & it is infinitely better. I’ve had for over two years using it 45 hrs a week & think it’s going to last me a long time. My wife uses the old standing desk for a craft table & cycles/uses it rarely.”

“My "lightweight" set up is a complete desk they called EC1. It's 48x30 and pretty basic. 1 motor, 2 legs, each leg has 2 telescoping sections. It's pretty sturdy, but it moves a bit at the top. Not anything that really bugs me, though. This desk carries a dual monitor stand with a 24" and a 22", a small computer case (which I've suspended underneath to reduce clutter on the desktop), keyboard, mouse, and various stuff for basic office work. My heavy desk uses the EC6 Max, dual motor, 3 stage legs and a heavy wooden top I found on FB Marketplace. It's 27x71" and quite stout. It's got 4 programmable memory slots which is a very nice feature. The dual motors really make a difference in how much weight it can lift and the 3 stage legs keep it very steady, even at the standing height. This desk is my real workhorse as it's big enough to put my dual 24" monitors on one end, and allow hobby electronic building and testing on the other side with a soldering station, battery charging station, and various other tools.”

“I brought this FLEXISPOT E6 MAX 140x80 Electric Standing Desk a few months back, and I am so glad I did. The desk is super solid and very smooth in operation. Feel free to ask if you have any specific questions about the model. Cheers.”

“I have flexispot E6 and I use it daily. Up and down a few times a day. Quite stable and suitable for all my use.”

“I have the flexispot e6 and am very happy with the quality of the entire piece. I was on the fence about several options and the e6 exceeded my expectations.”

“I really like my flexispot e6. I was in between a few brands but took the leap and couldn’t be happier. I’ve used it nearly every day for the past couple years and it has worked flawlessly. I can’t speak to the companies reputation or what you’ve read, but that’s been my experience so far.”

“It’s been a life changer for me. I got the flexispot E6 and a walking pad. Like others said, you need to give consideration to overall ergonomics, like monitor height, keyboard location, etc. The standing desk is a great way to start building better habits and improve your health if you’re at a desk a lot!”

“It's heavy, probably because it's real bamboo. But seriously amazing value for money super sturdy.”

“ok i get it, choosing your first standing desk is tricky. i've had a FlexiSpot for 2 years now and honestly the E6 is worth the extra if it fits your budget - the dual motors make it way more stable when raised. what worked for me was measuring my space twice before ordering. also check out the [VIVO Electric Standing Desk](https://www.amazon.com/s?k=VIVO+electric+standing+desk+55+inch&language=en_US&tag=bestdeals202f-20&ref=as_li_ss_tl) - i know a few people with it and they swear by the stability. make sure whatever you get has memory presets, you'll use them more than you think.”

“I'm also short, I just got a Flexispot that goes down to 25" (I believe it's the E6). So far it's been solid and looks great, no issues so far but I can't speak to longevity yet. I have the 71" rubberwood top. It was about $450 before tax. My boyfriend has an Uplift and it doesn't rise up or down anymore (and he rarely if ever raised its height), he said he's had it less than 5 years and paid over $800 for it. I think he has the 50" or so inch bamboo top.”

“I’m happy with my Flexispot, I believe it’s the E6Q and have had it ~9mo. It’s 48x24” and goes down to 24.7”. I do kinda wish that I got something slightly bigger, my two 27” monitors are 2ft wide apiece so they take the entire thing. The desk itself is great though.”

“[https://mulan.hu/FLEXISPOT-E7Q-negylabu-elektromos-magassagallithato-iroasztal-lab-Fekete](https://mulan.hu/FLEXISPOT-E7Q-negylabu-elektromos-magassagallithato-iroasztal-lab-Fekete) FLEXISPOT E7Q négylábú elektromos magasságállítható íróasztal láb, Fekete, 4 motorral, 300 kg teherbírással. Ilyet vettem pár éve, haverom és a családban is vettek a gyártótól és mindenki elégedett. Ezen a mulan.hu-n túl olcsó az ára, lehet vmi scam.”

“Flexispot E7Q, maximum magasságban is stabil, bár még nincs megterhelve, de szoktam rá támaszkodni, nem remeg be. mulan.hu-n árulják féláron, visszaküldött termékként, de semmi bajuk nincs.”

“Had multiple 2 leg desks. They all wobbled. Got a 4 leg Flexispot E7Q and no wobble at all.”

“I love mine! I have the Flexispot E7Q for a while now and highly recommend it. It looks really nice, I have the black/bamboo combo. It’s high quality and almost no “wobble” when on high. Before this I had an ikea one (which was ok), and the logitech herman miller one (really expensive and felt lower quality compared even to the ikea one).”

“Search for flexispot odin, it's the one with 4 motors (e7q I think it was). I bought a flexispot Odin without a desk, and bought a kitchen table desk from Ikea (edit: ekbacken walnut, custom size 90x200). It's a bit of an investment this way, but if you want quality, this is a great option.”

“I’ve got the flexispot E7Q, it’s on the expensive end but it doesn’t move a mm, rock solid.”

“Got myself a standing desk (Flexispot E7 — not the Pro) from Simplist Desk, and a chair (Rae Ergo Flex 4D) from Rae Connect. Both have been super solid and reliable. It’s been over a year now with zero complaints. Desk was around 160K, Chair was around 70K. Slightly more expensive today but way under ur budget. Below are the links 👇🏼 https://desk.simplist.lk/product/flexispot-e7-height-adjustable-ergonomic-standing-desk/?srsltid=AfmBOoq5ja8t0mvky6GG3VTDhU95OF6DU5VXicdh4L-T6ScjTAqx_bSV https://raesl.lk/product/rae-ergo-flex-4d-ergonomic-chair/”

“i ran into the exact same height issue when setting up my home office. the flexispot e7 actually goes down to 22.6 inches without the top, so with a standard 1-inch desktop you're right at 23.6. if you need that extra inch and a half, some folks add a thick cutting board or custom top. i've used the Flexispot E7 for about eight months now and stability is solid at sitting height - no monitor wobble even with arms. the crossbar is low enough that i don't hit it, and i'm 5'10. deskhaus peak is definitely more robust but the wait times pushed me toward flexispot instead.”

“I will recommend the E7 with chipboard top, about $400, but get better stability and build quality”

“Yes, I use the standing function daily to stretch my back and legs. I recommend the Flexidesk E7 model, which is large and sturdy - it can support various heavy monitor stands and the ability to adjust and pre-set various heights is useful too.”

“I have had a flexispot e5 for a couple years now. Carries 2 27inch monitors and couple items I need for work. Which is around 50-60 pound of weight on top of all cabling and a tabletop. It does wobble at the top quite a bit. But it was never a concern (stayed in the "high" state for a couple of weeks at the time). Still holds up pretty well, and after all the sales it was around 500 CAD before tax for the frame and chipwood tabletop. My partner also got the e5, but it looks like a newer version (5b) and it hold pretty well. But they put a lot of weight onto the desk”

“Ano yung ipapatong? If laptop and monitor lang, pwede na yung Flexsipot Deskey E150. If may desktop PC and multiple monitors, mag Flexispot E5 ka nalang. Sayang pera sa mga below 5k kasi sobrang uga, basura.”

“I have an e5 and it's been great especially for under 300$ with a 55x28" top.”

“I cannot speak for the CS as I did not require any, but I will say my experience has been a bit different to a lot of reviews on this sub. Here’s my extremely short experience: I ordered a E5 on Friday (5 days ago). I was originally going to get the E1 Pro but there was enough wobbly-monitor stories on reddit for me to cough up extra for the E5. I went with white frame, particle board 160cm x 80cm in Maple. The top arrived the next day, on the Saturday. Despite the clear footprint marks on the box, the top was in perfect condition. The top is a TAD more orange than I thought it was going to be. The frame arrived on the Monday, well packaged. (No footprints). I built it yesterday (Tuesday). The building part started out like any other simple ikea/flat pack adventure. A vague glance at the instructions before just YOLOing. At some point I came to a part that splits into 3 options, and I had to choose the correct section that corresponded with my desktop size. No section heading for my size desk matched, however the measurement on the 3rd diagram did match, so that cleared things up. The pre-drilled holes for the beams above the legs matched fine. The easy-mode build changed when I got to attaching the frame middle crossbeam to the desktop. No pre-drilled holes there at all. And since I chose a desktop that is super smooth and slippery, it was kinda terrifying starting each hole. I assume the partner would have been fine doing it blindfolded, but I’m stubborn and incapable of asking for help, and so this part was really shit. Connecting all the cables was easymode again. They plugged in easily and the desk magically moves up and down smoothly and quietly when I push buttons. Obv electronics suffer over time, and the buttons are 1 day old, not 1-3 years old. My desk is on the top floor of a 2 story home, and on medium pile carpet. So basically the worst case scenario when it comes to wobble. As a quick example, I have a cheap floor lamp in my study, that wobbles whenever the partner chases the cat down hallway. My (x2, 27inch on original stands) monitors wobble the same amount when on the standing desk, as they do when on the floor. If I had to hit the reset button and do it all again, I would complain slightly about the desktop colour, before getting it anyway. I would probably go with the cheaper E1 Pro option also. The E5 can withstand my partners crazy jumping dance moves without issue, so the E1 Pro with a “no jumping jacks allowed” sign on it would probably have been just fine. (Final shoutout to Flexispot AU. My partner now has FOMO but is kinda upset that the E5 does not come with a black frame option. If you have any build suggestions for his darker/Tron-vibes office, without taking too much money out of my handbag and clothing fund, I’m sure he would love to hear it)”

“To add to this, I have 2 from Flexispot and happy with both. Got an E8 3yrs ago and use it everyday and not a single issue, even disassembled the legs once during the move. 2 months all I needed a second standing desk and I was hoping to get the same model but they don’t sell it anymore so I ended up getting the E5. So far no issues with either. Even have a BenQ monitor arm on the E5 with a 27” screen and a 38” widescreen on a monitor desktop stand on the E8 and there’s very minimal shaking (at least for me) when the desk is raised to ~45 inch height. I want to say no shaking at all, but anything at that height must have some shaking but I honestly can’t remember a time where I lowered the height due to any shaking.”

“I have 2 Flexispot (E8 with a 48x30 top & E5 with a 55x28 top). Both are Flexispot’s white chipboard top and no issues so far. E8 - dual motors. Got it 3yrs ago and it still works without issue. I moved a month ago so had to disconnect it and take tie legs off. Reassembled everything, no issues. Love it. E5 - single motor. Got it a month ago and no issues so far. They don’t make the E8 anymore and since the second desk won’t be the primary desk, I went a little cheaper and got the E5. One of the things I look for when picking a desk is the position of the legs are in relation to the feet. I like them at the center of the feet (unlike the E7 Pro). Maybe it’s just me, but I feel like it reduces the shaking when the desk is raised.”

“(Also, they do have varying warranty periods depending on the model, 5-15yrs)”

“I have a flexispot e5 base that I attached to a 78x24 IKEA desktop I already had. Paid about $150 for the e5 base on sale. I'm about 5'11'' and have 2 x 27in monitors, my laptop on a stand and various other odds and ends. I've had it for over a year and am still very happy. The desk adjusts nearly silently and has practically no wobble at my standing height and 0 wobble at sitting. There is no side to side wobble at standing height. If I bump it really hard there is some very slight front to back,but I think I notice it more because of my monitor stands and not the desk. It never feels unstable. I've only had it for a year, so I can't speed to super long term longevity, but at about 1 year out I can't tell any difference between day 1 vs today when it adjusts. I've been very happy with my setup, no regrets”

“I spent weeks researching standing desks, I landed on Flexispot bc it looked reliable, and more affordable than other brands. I got the E5 (I didn’t need as much weight capacity as the newer models) The instructions were clear, and everything felt very sturdy while putting it together. Very stable and has the safety feature for preventing collisions. Hope this recommendation helps :D”

“Not sponsored and I've had my E5 for a month and absolutely love it. Smooth movement and very little wobble even on carpet. I had no problems screwing the base to the bamboo top as others have mentioned as mine already had pre-drilled holes. Fit and finish is excellent. The reason I went with Flexispot is I heard the owner was active here on Reddit along with their 10-year warranty.”

“I bought a Flexispot E7 Plus (four legs) and it does not move at all, whether at sitting (26.0 in) or standing (41 in). I have two laptops, speakers, a heavy-duty monitor arm and accessories on the desk.”

“I recently got the E7 Plus. I love it. I purchased just the frame and my work gave me a solid cherry work surface. Money well spent.”

“E7 Plus is the most stable model since it has 4 legs. That's the better option.”

“I think that’s too expensive in my opinion. I mean you get what you pay for so I’m pretty sure it’s good but I ended up going with the cheaper flex spot E7+ The downside with that Desk though is that you do have to drill your own holes into the table top. It came with pre-drilled holes and all of them were in the wrong locations… But, after dealing with drilling your own holes, it’s a good sturdy desk with almost no wobble whatsoever”

“I’m not sponsored. I’ve had mine for a month, and it’s dope. There is very minimal wobble and it lifted my 250lb fatass 6’ with no problems. I’m extremely happy and give it 5/5 bananas. For what it’s worth I have about 120lbs of stuff on my desktop. I have the bamboo top and the e7 plus 4 leg. It’s amazing. This is my third standing desk and by far the best and most stable. Good luck!”

“E7 Plus with the bamboo top, the price and dual column legs are what sold me.”

“Piggybacking. Have had mine for a year and a half. Love it, minimal wobble. Easily goes up and down, great presets, awesome desk.”

“Agreed. In my experience you’ll want a 4-leg desk if you’re putting a 3d printer on it. A two motor option like [Flexispot’s E7+](https://www.flexispot.com/flexispot-4-leg-standing-desk-e7plus) or [our Elite desk](https://ergodriven.com/products/the-ergodriven-standing-desk) would be fine!”

“i’d recommend this desk. just a little more expensive but it’ll last you much longer. it’s so stable if a nuke was dropped near the desk, it would not budge at all. [desk](https://www.flexispot.com/flexispot-4-leg-standing-desk-e7plus)”

“Flexispot E7plus max. My desk houses two custom liquid cooled PCs in it and it handles it with no problem the desk is around 200lbs . No wobble. 4 motors. Under $700.”

“I did the exact same thing, butcher block from Home Depot. All in around $700 for frame and top. Well worth it”

“Hey! :D I am from Austria and am looking into standing desks and since I am around 192cm I would need something that goes to at least 127cm (to the upper surface of the table top). It should be stable at standing height, I don't want it to be all wobbly. I only want the frame, I would just add my own table top of my liking to it. I would prefer if it had some cable management though (otherwise I guess I can just buy some generic stuff for that?) My upper price limit is \~400 EUR delivered. Do you have any suggestions? The things I found so far: 1. MAIDeSITe T2 Pro Max for 400 EUR delivered - seems to be a solid product from what I read(?) but also that the customer service is somewhere between bad and terrible. But the 135cm upper limit makes me hope it's somewhat stable. 2. boho Basic Line for 400 EUR + 25 EUR delivery fee - also seems to be somewhat solid choice, it's on the very upper bracket of what I want to pay though. I haven't seen much reports about customer service, just one positive mention, but that was during ordering, not for when things go wrong 3. Flexispot EC PRO 280 EUR delivered from Amazon - it clears the height requirement, but I heard an seen from at least two sources that it wobbles like crazy fully extended. I would be interested if the other tables I mentioned are any better though, since it's really hard to find reviews. I also dislike Flexispot's focus on flooding social media with what seems to be bought and affiliate reviews a LOT, which makes me very unlikely to buy a desk from them, unless somebody can tell me that they have good and reliable customer service and that that wobble is curable. I also have no idea if this is a real Flexispot desk or fake as the flexispot website does not list it(?) 4. Flexispot E7 Pro 350 EUR - I don't know anything about it. XD 5. Flexispot E7 Plus 399 EUR - I also don't know much about it either... but it's four legs - does that mean cable management will be more finicky? I don't know about any other products in my targeted price range - I would love some other suggestions or some comments from people owning any of these! \^\^”

“Yeah, I went for the E7 Plus after all. Contrary to what videos of competitors seemed to try to imply it's actually very stable, even fully extended for everything I would want from a regular work desk. I slapped an oak wood slab onto it and it handles that as well as my PC + 2 screens pretty effortlessly. I added wheels afterwards because I found I want to move the table quite often for cable management etc and you just don't "quickly move" a table with a base weighing 50kg and a wood slab weighing 30 or so alone. Personally I wouldn't buy the flexispot tops if you can get yourself one locally. The real oak wood one cost me pretty much the same as a fake wood one from Flexispot. I assume cause of the shipping.”

“Sorry but that's a low budget. Any desk in this range will wobble will only a little more load on top. Plus it won't last long due to the cheap parts (where do you think the low budget goes?). Honestly it's not worth buying something for this price and after sometime you will be saving for buying another of the same, whereas if you save a little now and buu a better one which will last longer. It depends on the load you have, first of all a single motor standing desk doesn't make sense to me. If you can increase your budget definitely get a dual motor desk and I'd suggest flexispot E series which is not too expensive like the uplift and performs way better for it's price point. You can read about dual motor desks, why they are better and what you need to watch out for: https://thewarrantedchoices.vercel.app/article/best-bifl-standing-desks-2026”

“Just got mine on Tuesday. Love it but damn was that box heavy!”

“I was in the same position about a month ago, debating between those same two options. Went with the Plus Max since I preferred the look of the provincial rubberwood top versus Deskhaus' laminate options. Plus it was cheaper than the Peak Pro, and especially so since I bought it during Black Friday. Have only used it a little, but current experience is as follows: it wobbles at standing height a little, but only if you push it on purpose. Typing on a keyboard doesn't seem to cause any noticeable monitor shake as far as I can tell. I'm only using one monitor at the moment and not on a monitor arm. Those on an arm may wobble more. Also, the desk is currently on relatively thick carpet and for reference my height is 5'9". The motors are much louder than I would have liked but I also don't have anything else to compare it to since it's my first standing desk. All in all, I would say you can't really go wrong with either of those choices. Both are probably among the most stable four legged desks. One last note: Flexispot customer service is not great and many others on here seem to agree with that sentiment. In short, good quality and competitive prices but poor communication.”

“I'm happy with my flexispot e7 plus (4 leg) frame with a 72x30 wooden top on it, even with two superultrawide monitors mounted and my fat ass sitting on the desktop it moves well and is stable in position. Sample size of one, it's the only standing desk I've owned.”

“My E7 plus with my butcher block is pretty good. I've never had a standing desk before and I love it”

“I have a flexidesk standing desk. love it. 32" + 27" monitor with keyboards, mouse, shelf, laptop, dock..etc. only that doesn't have is my PC which is on another shelf. but u can easily fit a PC on there if u only have 1 monitor.(or put it in the back and hide it.”

“I just got the E7 plus over the holidays. I've been happy with it although the screws they provide did not go into the bamboo top as easily as they claim or show without drilling pilot holes for me anyway, even using an impact driver.”

“I bought a Flexispot E7-Plus frame and put my own top on it (acacia butcher block I stained myself). You can customize the size of the top you put on it or buy the full desk from Flexispot - mine fits 3 monitors fine. It’s a 4 legged desk and *very* sturdy - cheaper models with only 2 legs often wobble, especially when standing up. And, yes, I’m in Canada.”

“I have the e7 plus max on a 72"x39" butcher block and it works without issue. I even put it on wheels and roll it around the house sometimes. Never had any issues with it!”

“Ive been impressed with my flexispot e7 plus. Very stable, well made, easy build”

“The usual vendors just sites, reviews, lurking here. Bamg for buck i went with Flexi. E7plus for the dual motor, height range(im 6'2), and wanted 72"”

“Anything from Flexispot that is E7 and above. I would suggest the E7 Plus but u/Ramzes888 can help.”

“I would say both as I have done that without issues.”

“Not a shill or desk nerd but I got a 4 leg flexispot desk (e7 plus) and it's very sturdy, heavy ass metal frame. Not all holes were pre-drilled so that caused confusion but the quality is good”

“Four legged is the way to go. I have a Flexispot 4 leg and put an IKEA kitchen worktop on it. Can easily stand on it when doing DIY work.”

“I'm a graphic designer and can be on the computer for long sessions to meet deadlines. I recently started working from home and my chair and desk were ok but not great and I was having a ton of back pain. I did a lot of research on standing desks. Yes. If you are at your computer for long hours and you get the right desk and don't try to go cheap on it, a good standing desk is totally worth it! I wasn't sure I would like standing up and working. I didn't think it would be comfortable to stand and draw on a tablet or do photo retouching in that position, but I am glad I got a standing desk because I actually do enjoy standing and working. The relief it gives your back is definitely noticeable. I will say that I think if you are serious about it you have to be willing to invest in a sturdy solid four leg desk. Research your options. I am totally pleased with my Flexi Spot E7 plus. The desk was around $650 with a rubberwood top - but their chipboard with laminate tops cost less and are good as well. So you could probably get the price down to around $550ish. The E7 plus is sturdy, well made, and the wood top is gorgeous.( I got the dark espresso rubberwood top.) The frame is very heavy but it makes the desk super stable These desks are heavy and assembly can be... challenging but I did it on my own and it worked out just fine. Thing is if you order a two leg and then realize you should have sprung for the more stable four leg one then you'll have to contact them, explain the issue you have, go through a refund process and then disassemble it and ship it back. So it's best to really do your research. I invested another $100 bucks or so for some extras like cable management and an under desk CPU holder that moves with the desk. Oh and I also got a small 3/4 " thick kitchen mat for about 20 bucks for when I'm standing. (Like the ones the chefs and kitchen staff use when standing all day prepping food.) I love it. I will stand when my back and legs start to hurt after sitting for a few hours. Prior to having it I was forced to sit the whole time and it was wreaking havoc on my lower back. I would wake up in pain the next day when constantly sitting. But now with just one or two standing sessions in an eight hour day, I don't have that pain anymore. I tend to stand for about an hour the most and then return to sitting but even a fifteen minute break for your spine is great and I'm sure you would feel the difference. I'm older so a comfortable work desk is a necessity for me. If you are younger, I still encourage you to invest in one now to prevent back issues later. Especially if you shrimp 🦐 over the desk when gaming or working. I get that it is a big chunk of change to drop for a desk but if you are sitting at the computer for long periods and especially if you are working from home it's well worth the investment in my opinion. I would have to say wherever you get a desk from - you should avoid the two leg style models. I got a second mid-range priced two leg E5 desk from FlexiSpot for my craft area to try to save some money and I regret it. I am now trying to return it and upgrade it to another E7 plus with four legs because the wobble is pretty severe and it disrupts my workflow. Do you have a good chair? Hate to add to the cost but a good chair is also important if you are on the computer a lot. I sprung for a Hon ignition chair I had been watching on Amazon for a while when the prices dropped near Christmas. Got it for about $350 and now it's up to $500 again. It has also helped so much. Chairs are tricky though because you really have to try them out first to see if it fits your body shape and needs. So if you can try some out IRL that's the best way to get one. We had HON chairs at work that I liked so it made my decision easier. Best of luck on your search. Also, there's a FlexiSpot reddit and one of the guys on there can help you get a discount code. Though they almost always seem to be having flash sales on their website anyway.”

“Nice setup. I also have the E7 plus and love it.”

“Congrats. I love my E7plus. Hava a similar setup with three monitors.”

“I was pretty unsure before buying the E7 Plus. Did a lot of reading and watched way too many reviews because I was worried it’d wobble once fully raised. Been using it for a bit now and honestly, it’s been solid. The up/down motion is really smooth and quiet, no weird jolts. I switch between sitting and standing a few times a day and it’s been hassle-free. Biggest thing for me was stability. Even at max height it doesn’t feel shaky at all. Typing, mouse use, monitor arm – all stable. Didn’t expect it to be this sturdy tbh. Build quality feels good too. The frame is heavy, desk doesn’t feel cheap, and once it’s set up it just feels planted. PS: had a small question and posted on their Reddit, got a reply pretty quickly. That was a nice surprise 👍”

“yes，As long as it doesn’t wobble, I’m happy. that was my main priority”

“Yes so far so good”

“Yes it’s on all the time”

“sorry, I’ve noticed that the indicator light turns on briefly and then goes off”

“**Hi,** I wanted to share my first standing desk setup. I probably spent too much time researching all the bits and pieces, so hopefully this saves you some time. Since I'm mentioning a few products - I haven't been paid by any of the brands to post this. It started with wanting to simply get standing desk to help with my back - and turned into room redecoration & realization that I operate better in a clean set up with few distractions in my field of view. # Desk – Flexispot E7 Plus + 40mm Solid Oak Worktop Being in the UK, the choice of 4‑leg standing desks is more limited than in the US. I was deciding between Flexispot’s E7Q, E7 Plus, or waiting for the upcoming E7 Plus Max. After watching a bunch of YouTube reviews, I was a bit concerned about the E7 Plus’s stability — it felt like a compromise. But with the deal I found, I went for it. In my setup, I don’t notice wobble, whether standing or walking on the treadmill. My heavy monitors and desktop probably add stability. If I deliberately push side‑to‑side, yes, there’s some movement. The only time it was really noticeable was when I knocked my head against the legs while doing cable management. The raise/lower speed is fine. There are faster desks out there, but I’ve never wished this one was quicker. It reacts gently if something’s in the way. I might consider the E7 Plus Max in the future, mainly because it can extend to the full width of my desktop (190 cm). I added shelves underneath using sturdy C‑brackets to hold a USB‑C charger, Schiit units, and headphones (hook coming soon). This keeps the desktop clear. Assembly was straightforward — just pre‑drill holes in hardwood and use non‑reactive screws (I went with stainless). The single brace is sufficient for my thick oak worktop, but with thinner wood I’d want extra reinforcement. The only part I needed help with was flipping it upright. # Lightbar – BenQ Halo2 Got it on a Black Friday discount. I can’t compare with other light bars, but my evening eye strain is basically gone. I never have to adjust it — the auto detection works perfectly. # Walking Pad – Flexispot GP01 Quiet, works well, and I chose it mainly for the 2‑year warranty (most others are 1) and 60‑day return policy. Walking pads are one of those things people often stop using, so the return option gave me peace of mind. The only quirk: I can’t figure out how to switch it off with the remote, so I use a smart socket. Typing, reading, or watching something while walking is fine. Using a mouse is trickier, but dropping the speed with a shortcut helps. # Wobble Board – Fluidstance Plane I wanted a cushioned surface so I wouldn’t need shoes. This board nails it. The width feels natural, and I can type and use my mouse comfortably. If you find a cheaper board that meets your priorities, go for it — but this one works great for me. (And honestly, spare yourself from looking at Reddit wobble board reviews — most are from the COVID era and read like blatantly written by the companies themselves.) # Setup Process * **Cable Management:** Long and painful. I tried magnets, but velcro straps were the most efficient. The desk frame makes a brilliant anchor point. * **Redecorating the Room:** Before starting a project like this, think carefully about your goals. I initially thought about replacing the desk, but once I cleared the clutter I noticed the walls were marked. That led me to repaint the room (E7 Plus makes an amazing platform for painting), then build a wooden panel to cover damaged wallpaper. Through this process I started appreciating a cleaner setup: I moved a shelving unit to the wall behind me and kept as few items as possible on the desk and in my field of view. As a finishing touch, I used a 10 cm offcut from the desk to make a small shelf under the whiteboard.”

“If you like the look of your PC and have space - why not on top! Also it all depends how big your desktop is. For mounting you desktop it - I would look at size of the frames for E7 Pro & E7 Plus that you're considering and see where you could fit it. With e7 Plus you might struggle to fit the mount and PC inside of the frame. If you fit it outside, than you have to make the frame narrow which takes away the space... just do a bit of lego on the drawing of dimensions. I was a bit too optimistic in terms of space, until I received the PC mount and realized it's not as easy as I thought.”

“Also have the flexispot with the bamboo desktop and I lean on it fairly often, no issues. The weight capacity is some absurd number like 300 lbs”

“I think that's what I have.(Just looked up my old email, I have an e7+ 72\*30) Looks like it was like 940$. Had it for a year and a half, feels like it's been longer. Its been a really great desk. It raises up surprisingly high, it's super sturdy and feels very well build. I have a large surge protector attached to the underside for a much neater cable management. Highly recommend it, I can't think of a single complaint I've had for this desk it's priced very well, was easy to assemble, very heavy duty and sturdy. I think the only thing I remember have to do was pre drill some holes on the desktop portion of the desk but it was just a little measuring. At one point I had an under the desk PC mount drilled and installed into the underside of the desk and it worked really well until I got a new PC and it no longer fit in that mount. https://preview.redd.it/5m1xr9mxpq0g1.jpeg?width=3072&format=pjpg&auto=webp&s=54721140f3ae3dbb2a5a6b59e751ab2e8d1d3dc8”

“I've just setup a flexispot e7 plus, really really pleased with it. Reasonably quiet and very smooth movement, absolutely rock solid with my desktop set up on top of it. Holds 200kg so no worries about weight. I bought a bit of beech countertop for the desktop, which was a little expensive but looks great and feels really robust.”

“Depends on your requirements. I looked at this and the flexispot e7 plus. Went with the flexispot because it has four legs, so it is likely less wobble when raised. It was much cheaper since I reused my original large (180cm) desktop, therefore only needing to purchase the legs. I like the idea of an integrated cable system, but nothing a cheap bolt on tray from Amazon wouldn't fix. Can confirm that the wobble isn't an issue for me, I'm over 6ft and need it quite high, and I get quite animated when I game.”

“Four leg for extra stability. In terms of the mount it depend on the depth of your desk. I have the e7 plus, and have 10cm space underneath. My steering wheel, and hotas clamps fit nicely.”

“100% for the price, it's a brilliant addition to my office. I game so stability is key, it's pretty sturdy when raised thanks to the four legs, most noticeable wobble is side to side, but who's shaking their desk like that in any real normal use.”

“Also, I only bought the frame. I used my old desk top. I would recommend shopping around for a worktop, you can probably get one cheaper from a wood supplier.”

“If you are 6’2”. You’ll be disappointed with all of them. Get the e7 plus max.”

“I ordered a standard standing desk a couple years ago and was never able to get it to work properly and it wobbled like crazy. Sent it back and let it be. Fast forward, i assembled my flexispot e7 plus (4 leg one) and i haven’t put the top on yet but when i raise it up to the height i want, im 6’ 6”, it’s solid! I have it setup on the narrowest width rn and it’s not budging side to side either. To me 4 legs makes the most sense. Every table worth a damn has 4 legs. Why hoist thousands of dollars up on 2?”

“Looks just like my Flexispot E7 Plus (Which I love)”

“4 legs is definitely the way to go. I've been extremely happy with mine. I got just the frame as I was given a 73 x 30 office work surface from my work. I have been extremely pleased with mine.”

“I have a 73" x 30" cherry red work surface for mine. Thing is crazy heavy. I also have 2 monitors mounted offset behind the left leg. I am 6'1-6'2 so it goes up quite a bit. There is minimal wobble when at height. For general browsing or working it's great. In the lowered seated position it's extremely solid. I play video games at a somewhat competitive level and the wobble was extremely important to me and there is none when seated.”

“I have a Flexispot adjustable desk with ports like this and programmable heights and I use the ports for literally everything. Even when I’m not working it’s a great spot to charge things you don’t juice up every day - Bluetooth speakers, battery packs etc I work hybrid and I have a much more basic model of the same brand at the office. Both have been operating great for three years!”

“I have an E7 Plus at my home and E6 at my cabin for remote work. The E7 Plus is solid and is great for gaming. E6 wobbles a bit, especially at standing height. I haven't used the E6 for gaming, but I don't think I would like it.”

“I just recently bought a Flexispot E7 Plus, and I’m loving it. The extra stability of four legs as opposed to two makes it a more solid feeling desk when it’s raised to standing height.”

“my flexispot e7 plus i just purchased is awesome. im a 5 foot 8 inch 180 lb male for reference.”

“I'm 6'1" and have no problems with the E7 Plus. Yes there is some movement, but it's minimal even when typing and walking on a treadmill at the same time. I can't speak to the other, of course, but I would 100% get a 4 leg desk for the height.”

“I actually make content on setups and the one product that all brands started sending me early on were standing desks. I’ve showcased and reviewed/compared lots of them. To the point that I got bored of talking about standing desks. Lol. Important tips: -They all wobble at standing heights if they have 2 legs. Bothers some people, doesn’t bother others. At sitting height they are solid. I kept a Flexispot E7 Plus as a workbench on wheels. 4 legs, so super stable and I like the dark walnut top with the black frame. -Even a cheap standing desk will do fine. I’ve tested everything from under $250-$3500 standing desks. They all have worked fine when it comes to being a desk and being able to stand. The cheaper stuff requires more steps to build and have very little features. Quality is also lower and the top might come in two pieces to save on shipping. But my wife loves her cheap $250 Fezibo desk from Amazon. She doesn’t care about the bells and whistles. -Think about what you’re going to put on it. If you’re using clamp on accessories, avoid desks with a thick frame that goes all the way around. Do you want to have clean cable management? See that it at least comes with a cable management tray. Some even come with pegboards. -I like Vernal and Flexispot as good value options. But you have the high end stuff like Secret Lab, Grovemade, Ergonofis, etc. And most brands have higher end tops like real wood instead of laminate. -My dream standing desk is probably the Balolo one, but haven’t had a chance with that one yet. Let us know what you end up going for!”

“So I started a desk setup YouTube channel a little over 2 years ago now and one of the items I would get sent pretty early on were standing desks. So I covered a ton of them through reviews, sponsorships, etc. And while I’ve covered many of nice ones. We bought the cheapest one we could find at the time on Amazon for my wife’s desk setup build. I think it was a fezibo one, which might be owned by one of the larger brands anyways. it was like $200 and while it doesn’t look nice, it’s super functional and my wife loves it. I’ve yet to run into a standing desk that doesn’t work as intended. I do have a lot of experience with vernal and flexispot. I think they are both great options because their prices are so good for what you get when it comes to low and mid tier options. What I liked about vernal is how easy the assembly process was and yes, the accessories. The last video I did with them was for a solid wood top standing and the quality was great. It was for a desk setup build for a friend and I was sad I was giving it to him and not keeping it for myself. lol But if you want stability at standing height, 4 legged standing desks are the way to go. I’ve never seen a two legged standing desk that doesn’t wobble quite a bit at standing heights. I personally kept a 4 legged standing desk I was sent by flexispot and use it as my top down filming desk because I don’t have to worry about stability. And I have it on wheels.”

“Had my FlexiSpot standing desk for almost 4yrs now and love it. Not one of the fancy ones but the standard (think it was the E series) that has the basic motor and 4 position memory. Has been flawless the entire time and I do use the stand feature regularly as after about an hour or two of sitting I need to get up or my back and hips grumble at me.”

“The Flexispot 4 legged ones are built forever. Three across the family, just work. Spendy tho. Very easy to assemble, great instructions. I’ve used everything from an old desk to a door to a butcher block for a top, no problem.”

“I have the plus max, which I know is a slightly higher price point, but I would highly recommend it. I often have it up close to 50 inches when using a walking pad and it's very solid. I'm not entirely sure how to describe the difference in the feet between the plus and the plus max, but I think they did something slightly different with them that makes it's a little more stable on the plus max.”

“With the Magnus Pro XL, make sure the clamp of the monitor arm you pick fits into the space of the cable tray. They designed their monitor arms to fit, so there may be arms out there that do not fit that space. Also make sure the desk depth is good enough for your monitor. Since you have a 48" monitor, even 30" depth might not be enough and the Magnus Pro XL is smaller at 26.4". At least with the Flexispot and Uplift, you can easily swap out your desktop for different dimensions if needed. For stability, the 4 leg will win, especially at taller heights, but 2 legs could possibly be more than enough depending on the heights you need and your tolerance for movement.”

“You can just replace the legs. I bought the flexispot e7 plus (frame only) and it’s great. It has 4 legs so there is no wobble. Might be overkill for you though.”

“I think two leg is definitely enough for most people. But if you really hate any and all wobble or you have an extra heavy set up the E7 plus is a very nice desk”

“If your doctor is telling you to do it, you should get one you'll actually use! :) That said, I think the Flexispot E7+ is a great choice. But since you're curious, as someone who works in the industry, here's a quick explainer on brands (in my opinion): **“Amazon Specials” like Claiks, ErGear, HUANUO etc.** - Primary consideration: Budget. These are frankly total trash, probably even worse than the cardboard boxes I used for my first few years of standing. **[Flexispot](https://www.flexispot.com) - Primary consideration: Value.** Buy here if your first consideration is budget but you don’t want garbage. Stick to E7 and above. **[Secretlab](https://secretlab.co) - Primary consideration: Cable Management.** Buy here if you’re a gamer and/or you just can’t stand to see a cord. **[Uplift](https://www.upliftdesk.com) - Primary consideration: Corporate Sales.** Buy here if you’re a purchasing manager (at work or at home). No one ever got fired for buying IBM. **[DeskHaus](https://desk.haus) - Primary consideration: Stability.** Buy here if you want to absolutely annihilate any and all wobble or sway, or if you need to support a massive desktop. **[Branch](https://www.branchfurniture.com) - Primary consideration: Apartment Chic.** Buy here if your home office is also your living room. And where we think we fit in: **[Ergodriven](https://ergodriven.com) - Primary consideration: Ergonomics.** Buy here if you actually want to use your standing desk, because [the Tempo desk](https://ergodriven.com/products/the-ergodriven-standing-desk) monitors your presence and position and automatically moves your desk for you before you end up stuck in one position too long. FYI if you end up picking up one of those desks above for the totally valid reasons I listed, you can still get a [Tempo controller](https://ergodriven.com/products/tempo-smart-controller-for-standing-desks) and just swap out your controllers in a few minutes (Tempo is compatible with all the brands above - and many others - except the “Amazon Specials”).”

“Yes, you can cancel a suggested move by hitting any button, or toggling the body of the controller (the whole thing is a paddle switch). The "standard way of interacting with Tempo is what we call "Cruise Control". You pick a standing duration / interval (say 40/60 minutes). Then let's say, you start standing up. After ~40 minutes of you being actually present at the desk, Tempo's screen will turn on and start a 15 second countdown timer: "Sitting in 15 .... 14 .... 13" When it hits 8 seconds remaining, it will "pulse" your desk a bit to let you know a move is coming in case you didn't notice the screen light up. At any point in the 15 second countdown, hitting any button will cancel the move. You can also stop a move that's in progress and manually move the desk to any height or send to a preset. You can also always double click the paddle down to pause cruise control, or add time to an existing pause. Double clicking up cancels the pause. Back to our example, if you don't stop the move, it will move to your sitting preset. Then ~20 minutes later, it will start counting down for a move back to your standing preset and the cycle repeats! There's lots of other cool stuff you can do, but that's the main flow!”

“Of those options, E7+ would be most stable. But if stability is your #1 concern, go with deskhaus, that’s their thing. Btw the [Tempo Controller](https://ergodriven.com/products/tempo-smart-controller-for-standing-desks) works with all those options except vernal, which we’re adding soon!”

“Have the one with the 4 motorized legs. Rock solid. Highly recommended. Used the have one with only 2 legs and was a bit wobbly.”

“Our E7 plus 4-leg standing desk can go to 26", with 1" desktop, will be 27", our E7 plus max, a more stable 4-leg standing desk model, can also go to 25.8"”

“If you want better stability, the E7 Plus is the way to go. Or, if you’re willing to stretch your budget a little more, the E7 Plus Max is an absolute tank, rock solid.”

“I just got the E7 Plus with the Rubberwood Top. Most of the holes were pre-drilled and the locations were spot on. Since it's a 4-leg/2-motor design, there's a lateral drives haft for each side, and that has a cover plate that mounts to the desk top. This didn't have pre-drilled holes, and neither did the control box. Luckily the screws tapped without any issue since I was nervous about drilling pilot holes too deep.”

“Flexispot e7 plus does not move on carpet. I mean unless you decide to shove it, but that's not what your doing in normal use cases. Honestly I'd suspect any thing with 4 legs will do well.”

“I have an older autonomous L shaped desk and just recently purchased an e7 plus. They are both great. Ive had the autonomous for upwards of 5 or 6 years and it still works without any issue. The only issue I ever had was my own fault as I had something under it when it was going down and broke my desktop. But I believe the newer models come with collision detection so that wouldn’t really be an issue for you. Ironically I’ve been having issues with the e7’s collision system and it keeps firing erroneously, but I believe that’s user error and I just need to get it dialed in better. I went with the e7 plus for my second desk because I really wanted the stability of having 4 legs and I was not disappointed. If greater stability is important to you, I personally think it’s worth it. The autonomous 4 leg desk last I checked was considerably more expensive than flexispot and was really the primary reason I didn’t go back to them. Other than that though I really don’t notice any real difference between the two. You set your position for sitting and standing and they do their thing. Flexispot also has wonderful customer service and easily accessible through their subreddit and if you message them on here he’ll give you a discount code that stacks. I can’t speak to automomous’ customer service as I’ve here had any interaction with anyone there though I also haven’t had reason to. I also got the caster wheels add on for my e7 plus and I am sooo glad I did. Very cheap upgrade that’s well worth it. Cable management wise autonomous came with the metal tray. The e7 plus came with nothing and I didn’t purchase any from them. Decided to DIY it myself for much less. I bought a few server rack raceways, Velcro, and a cheap cable management kit from Amazon. I much prefer my DIY method and it came out much better. Ultimately I think this tier of standing desks end up being all very similar. I don’t think you can go wrong and honestly recommend going with wherever you can get a better deal.”

“I just setup my flexispot e7 plus and love it. I’d save the money. If you reach out to them in the flexispot subreddit they usually give you a 15% off code.”

“Hey all — longtime lurker finally posting. TL;DR: Solid value but with quirks. The 30‑day return window makes it a low‑risk try. I bought the E7 Plus with the 55×28" dark rubberwood top. Ordering Experience (aka the worst part) The website was… not great. Typos everywhere, chat stuck on “first in line” for hours, and the promised signup coupon never arrived. The whole thing felt like weak QA or a very small team. The sales tactics also felt gimmicky — “up to 80% off” when all the 80% coupons are already claimed. It honestly made me hesitate because I didn’t want to overpay. I researched a ton (FB Marketplace, Uplift, Deskhaus Apex Pro). Flexispot won because of the 4‑leg frame and 550 lb weight rating. The only reason I pushed through the frustrating checkout was because of Ramzes888’s comments on other peoples posts, which gave me confidence that issues could be fixed post‑purchase. Setup & Accessories I basically did a full overhaul: • ⁠$200 BENQ dual‑monitor arms • ⁠$300 walking treadmill from Costco • ⁠$60 Flexispot under‑desk CPU mount My partner was not thrilled with the spending spree, but Flexispot probably could’ve captured more of that if their site made bundling easier. The desk arrived late due to Black Friday backorders. Assembly took a couple hours. Not all holes were pre‑drilled, and some instructions were confusing. I had to drill my own guide holes. Once built, though, the desk is rock solid — even with my 4‑year‑old hanging off it. Mounting the CPU was a nightmare. With the motors + smaller desktop, there’s barely any room. I ended up letting it stick out the back and pulling the desk away from the wall. Flexispot should really include paper drilling templates for accessories. ALMOST - One Month Later I’ve walked 50+ miles on the treadmill already. I slightly regret not getting a larger desktop, and the rubberwood scratches easier than expected. I’m already thinking about replacing it with a live‑edge slab eventually. Random Thoughts • ⁠The desk goes lower than my old one — surprisingly nice. • ⁠It also goes higher than I’ll ever need (I’m 6'3"). • ⁠Treadmill + monitor arms = perfect eye level. • ⁠My BENQ arms don’t adjust vertically as easily as I hoped — might return them. • ⁠The 4‑leg frame makes the treadmill setup feel very stable. • ⁠If I stick with standing desks long‑term, I could see myself upgrading to a Deskhaus Apex Pro. • ⁠I bought this for health reasons. I can game standing, and with the treadmill I can play anything except FPS (too dizzy). RTS/MOBA games are totally fine.”

“4 legs probably isn’t needed. I use a 2 leg one at work which is somewhat wobbly at highest setting. I’ve used a friends uplift v2. It’s 70” and it wobbles too at full height but neither wobble is too much. I went with the 4 leg because I anticipate wobble from kids and wanted to future proof a little. Both were high enough, and a monitor arm or raiser would be cheap enough to add more height. The added stability to treadmill while gaming was also a factor. Likely not needed but I like it.”

“When I hear “cozy corner” and “living room”, I tend to think of Branch, that’s kind of their vibe. As someone who works in the industry, here's my opinion of the top standing desk brands and who should buy from each one: **“Amazon Specials” like Claiks, ErGear, HUANUO etc.** - Primary consideration: Budget. These are frankly total trash, probably even worse than the cardboard boxes I used for my first few years of standing. **[Flexispot](https://www.flexispot.com) - Primary consideration: Value.** Buy here if your first consideration is budget but you don’t want garbage. Stick to E7 and above. **[Secretlab](https://secretlab.co) - Primary consideration: Cable Management.** Buy here if you’re a gamer and/or you just can’t stand to see a cord. **[Uplift](https://www.upliftdesk.com) - Primary consideration: Corporate Sales.** Buy here if you’re a purchasing manager (at work or at home). No one ever got fired for buying IBM. **[DeskHaus](https://desk.haus) - Primary consideration: Stability.** Buy here if you want to absolutely annihilate any and all wobble or sway, or if you need to support a massive desktop. **[Branch](https://www.branchfurniture.com) - Primary consideration: Apartment Chic.** Buy here if your home office is also your living room. And where we think we fit in: **[Ergodriven](https://ergodriven.com) - Primary consideration: Ergonomics.** Buy here if you actually want to use your standing desk, because [the Tempo desk](https://ergodriven.com/products/the-ergodriven-standing-desk) monitors your presence and position and automatically moves your desk for you before you end up stuck in one position too long. FYI if you end up picking up one of those other desks above for the totally valid reasons I listed, you can still get a [Tempo controller](https://ergodriven.com/products/tempo-smart-controller-for-standing-desks) and just swap out your controllers in a few minutes (Tempo is compatible with all the brands above - and many others - except the “Amazon Specials”).”

“E7 and E7 Pro are totally fine. The overwhelming majority of standing desks out in the world have two legs and most users don’t notice any wobble”

“As someone who works in the industry, here's my opinion of the top standing desk brands and who should buy from each one: **“Amazon Specials” like Claiks, ErGear, HUANUO etc.** - Primary consideration: Budget. These are frankly total trash, probably even worse than the cardboard boxes I used for my first few years of standing. **[Flexispot](https://www.flexispot.com) - Primary consideration: Value.** Buy here if your first consideration is budget but you don’t want garbage. Stick to E7 and above. **[Secretlab](https://secretlab.co) - Primary consideration: Cable Management.** Buy here if you’re a gamer and/or you just can’t stand to see a cord. **[Uplift](https://www.upliftdesk.com) - Primary consideration: Corporate Sales.** Buy here if you’re a purchasing manager (at work or at home). No one ever got fired for buying IBM. **[DeskHaus](https://desk.haus) - Primary consideration: Stability.** Buy here if you want to absolutely annihilate any and all wobble or sway, or if you need to support a massive desktop. **[Branch](https://www.branchfurniture.com) - Primary consideration: Apartment Chic.** Buy here if your home office is also your living room. And where we think we fit in: **[Ergodriven](https://ergodriven.com) - Primary consideration: Ergonomics.** Buy here if you actually want to use your standing desk, because [the Tempo desk](https://ergodriven.com/products/the-ergodriven-standing-desk) monitors your presence and position and automatically moves your desk for you before you end up stuck in one position too long. FYI if you end up picking up one of those other desks above for the totally valid reasons I listed, you can still get a [Tempo controller](https://ergodriven.com/products/tempo-smart-controller-for-standing-desks) and just swap out your controllers in a few minutes (Tempo is compatible with all the brands above - and many others - except the “Amazon Specials”). Also I've posted this in a few threads now, just realized we should make this more comprehensive, maybe as a page on our site, so we'll work on that.”

“Thank you! I ended up pulling the trigger on the flexing as it has everything I need and really, I don't see much difference in the reviews. Both seem to have a good warranty and return policy, so will see how it goes.”

“I did the exact same thing. Put a nice butcher block top on my e7 flexispot and it’s really high quality for the price. Haven’t had a single issue and it can handle all the weight easily.”

“There’s basically 3 levels — high end over $1000; middle level $500-$700; cheap under $500. I got a middle of the road Flexispot E7 and I’m happy with it. If you’re on a budget a mid-level desk is pretty good. If you don’t consider it to be sacrilegious, you might be able to use the top off grandpa’s table and on the adjustable base. Several companies will sell only the base. For me it was my best ergonomic purchase, mostly because I could adjust the height of the desk perfectly. It’s not the holy grail. Once you get it, do some research to make sure everything is set up properly.”

“A standing desk does more than just let you stand. It allows you another mechanism for getting your alignment perfect. I had a problem getting a chair that went high enough. The Flexispot E7 came down to me and my feet can be on the floor. I also adjust it for different tasks. So I guess my answer is I’m using it whenever I’m at my desk, even if I’m not standing, because it also makes sitting better.”

“This. I am 5’3 and short waisted and tried a lot of products, but I was never able to perfect the ergonomics until I got a sit stand desk. Before you buy, measure from your elbow to the floor when sitting with your feet flat. You need a desk that will go down to this height. I have the Flexispot E7 which goes down to 22.8 inches.”

“Had Flexispot for 8 months—typing/gaming no shake! Black Friday deals make it a steal 🎉”

“The E7 Pro is a sturdy desk. 6’ and use it standing often, no problems. Nicest desk I’ve ever had.”

“Flexispot CA for me (E7 with 78” bamboo desktop) is definitely more than enough. Sure, I’d prefer if it was some other type of wood other than bamboo, but really I think I’d regret not going with this size that I currently have. You’re pretty much paying for the branding IMO and the odd warranty situation if you’ll even use it. Just buy what you can at the time and stop worrying about it.”

“A big feature to look for is a collision sensor — stops the desk from going up or down if it senses resistance in the moving direction Had a desk without this and i have slanted ceilings if I wasn’t paying attention I’d deff go through the ceiling with my monitor I have a flexispot pro now prob the e7 idr but I’m super satisfied with it”

“Yes, they’re great, so long as they’re sit/stand. I switch several times a day. I got a Flexispot years ago and I’ve been very happy with it.”

“Flexispot is great, I've had 2 and never had any issues with either.”

“Another vote for Flexispot…two other family members also have one”

“I got Flexispot E7 pro and cant be happier on how stable and smooth it is. Paired it with a 98” Ikea butcher block though. Super happy”

“I personally went with a Flexispot E7. Siya ang marami reviews talaga kahit international. No issues whatsoever. I bought a frame only kasi meron naman na akong table top na wood.”

“I have the Flexispot E7 and it's very very smooth and balanced. Hindi ganun kauga even when typing heavily while standing. Highly recommended, pero masmahal nga siya than other options. I only bought the frame as I have an existing tabletop, so can't comment on the tabletops nila.”

“I have been using a FlexiSpot E7 for a while now. Decided to get this since I have a heavy wood table top that I wanted to use. And I wanted to avoid it becoming top heavy. It's amazing since I can sit or stand in seconds, with just a push of a button. No fiddling around na halos, pag pagod na sa pag-upo, press the button, stand up, stretch konti and continue sa ginagawa. Pag pagod na tumayo, press the button again and upo na ulit. 😅 I think if you go with manual, you won't be able to do what I just described above. Too much work to do each time and the desk would probably vibrate/sway din. Bagay ang manual if gusto siguro iadjust properly ang height ng desk. I viewed it as one of my tools of the trade kaya I decided to get a good one.”

“I purchased the FlexiSpot E7 Pro in September 2025 and have now been using it almost daily for around 4 months, so I feel like I can give a proper, honest review. I originally bought this desk after my IKEA tabletop broke. Over time, the weight of my monitor setup clearly became too much, and I wanted something far more solid and long-term. After a lot of research, I went with the FlexiSpot E7 Pro and I’m genuinely glad I did. Overall, I’d give this desk a **9.5/10**. I work as an accountant, so I regularly do very long hours at my desk. Having a sit-stand desk has been a massive quality-of-life improvement. The preset height function is incredibly useful and makes switching between sitting and standing effortless throughout the day, especially when you’re deep into work or study. The depth of the desk is another big positive. There’s more than enough space for monitors I am using 3 27inch monitor's for reference, a keyboard/mouse (Using Logitech Mx Master), and any files or paperwork/accounting manuals I need during the day without it ever feeling cramped. I’ve also added an external desk shelf purely for aesthetics and extra storage, which really elevates the overall look of the setup. In terms of value, I honestly can’t recommend the FlexiSpot E7 Pro enough, especially if you’re able to get it on a discount. My brother owns the Secretlab Magnus Pro, and my desk is the exact same size as his XL. Having used both, I genuinely feel the FlexiSpot offers much better value for money. There is a slight wobble when standing, but this seems to be the case with virtually all standing desks, and it hasn’t affected my work or stability in any meaningful way. This desk has genuinely been a life-changer for me, particularly for long workdays and studying. I would highly recommend it to anyone who spends extended hours at their desk. I’ve included some photos. Apologies for the cable management, it’s not the best. Unfortunately, I can’t use a dock due to work restrictions (unable to download DisplayLink software), however the cable management tray and cover provided by Flexispot under the desk does a great job and should be sufficient for anyone. If anyone has any questions or concerns about the desk, feel free to ask. I’m more than happy to help. https://preview.redd.it/4oye5wksnr9g1.jpg?width=4032&format=pjpg&auto=webp&s=afc4adc4ee044a668980943732f88ecec3497422”

“Finally made up my mind to go with the FlexiSpot E7 Pro, and I’ve been really enjoying it so far. I went with the 55×28 size, and the solid wood texture looks great and feels high quality. The desk feels sturdy and well-built, and switching between sitting and standing is smooth and easy. Assembly was straightforward and didn’t take much time, which was a nice surprise. The motor is a little bit loud, but the movement itself is smooth and consistent. The cable tray easily attached does a great job of completely hiding the wires, which keeps the setup clean. Overall, it’s been a solid upgrade to my workspace, and I’d definitely recommend it to anyone looking for a reliable standing desk.”

“This. E7 Pro and Ikea Top”

“Using a flexispot, you can choose the size of the legs and also the size of the top It’s not cheap, but really worth the money”

“I had the same dilemma as they are all very, very similar, so what mattered the most for me was the after-sales support and the guarantee that they'd still be around for the long span of the warranty period. So I had to pick between Uplift and Flexispot in the end, though I liked the aesthetic of Vernal the most. I ultimately went with Flexispot because they seem to be the most popular and have more market share in the standing desk market (direct-consumer), so they're the most likely to be around for a very long time since your 15-year warranty is useless if the company suddenly goes out of business.”

“Get a real standing desk. Uplift seems to be the gold standard, but Flexispot is pretty great too for a cheaper option. Having a big flat surface you can set at any height is a game changer.”

“The regular e7 from flexispot goes down to 23” (add an inch for the desktop). I ordered one myself this week.”

“Check out Flexispot on Amazon. Quite affordable and mines been perfect for the last year or more. They aren't a premium brand but they are high quality and mine hasn't disappointed me.”

“flexispot desk and a used Embody (or other herman miller models) are way better value.”

“What is your budget. I just got a Flexispot E5 Pro for £200 (\~260 USD). Granted I do woodwork as a hobby so making a 900mm (\~35") top wasn't an issuse. Lived with a 600mm (\~23") for a while and it was a painful experience even pushing the monitor way back beyond the desk back.”

“I just got the E7 pro I think it was, great desk and very easy to put together.”

“This sub was super helpful when I was deciding which standing desk to purchase for my WFH setup, so I thought I’d post my initial review of the desk I ended up purchasing: **SHIPPING:** Shipping was super fast. I received my order 5 days after purchase and everything arrived in good condition via FedEx (in two separate boxes). Fair warning though- the metal base is VERY heavy. I struggled to lug it the 8 feet to my door. **ASSEMBLY:** Assembly was super simple. It took me less than an hour by myself to assemble. The only confusing part is that the instructions show holes to mount the included wire rack, but there weren’t any. You have to drill them yourself, and I had to look up an assembly video to figure that out. Other than that though, the provided instructions are clear and easy to follow. **INITIAL/OVERALL THOUGHTS AFTER 1 WEEK:** Overall, I’m very happy with my purchase. The desk feels really study (it stays completely in place), moves smoothly from sitting to standing, and the quality feels great for what I paid (\~700). I feel like it will last me a long while, but I will update if that ends up not being the case. **MY SPECS:** Rubberwood desktop in provincial (55”X28”) with the E7 Pro Frame **BONUS:** I also purchased my chair through them (the C4 model) and I’m really happy with that as well so far! It’s comfy, adjustable, and the footrest is great.”

“I would say that I lean pretty heavily on the front half of the desk (both when I’m sitting and standing), and I don’t notice any give personally!”

“Same, I can highly recommend Flexispot!”

“You’re 6'1" with a heavy setup. Forget the base E7. You need stability at height, which means a T-frame is better than a C-frame. It's between the E7 Pro and the E7Q. The E7Q is a four-leg tank. It has zero wobble, but it's overkill for 99% of people. Unless you're doing microscopic soldering on it, you don't need it. I've got an ultrawide and a vertical monitor on the E7 Pro. It's solid. Any tiny bit of movement you might notice comes from the monitor arms, not the desk frame. Save the cash, get the E7 Pro, and spend the difference on beefy monitor arms that clamp down tight. That'll give you the stability you're actually looking for.”

“Flexispot E7 Pro base + a butcher block top.”

“Just bought the flexispot E7 pro last week with a 71"x35" desktop, so far I have zero complaints it works really well, is sturdy, and the motors are quiet I haven't written a review yet but will be in a few days after using it more”

“They must've gotten a lot better - I ordered mine a few weeks ago, and expected a delay because they were switching the dark bamboo desktop type to wood instead of honeycomb and i got it all within the same week I ordered I got the e7 pro, zero complaints from me - it's stable and works really well”

“I had one of the Ikea ones when they first started doing them maybe a decade ago. It was OK but I found I left it down a lot of the time and if I was standing I wasn't standing in a great posture anyway. Biggest thing was that it had no memory so it was always a bit of a faff going from one to the other and tweaking it up and down a bit to get it right. Ended up in the kids room. Due to change rooms around again at home so I'm tempted to try a Flexispot (with position memory this time). I found it was good for the afternoon lull you sometimes get although my WFH routine rarely has me sitting for hours at a time, I have a wireless headset and wander about if it's a long call, or nip downstairs to make a drink through the day.”

“The pro i have is quite stable on my floor which isn’t exactly level, and the plus is supposed to be quite a bit more stable, so Id say get the plus.”

“mine Flexispot Pro E7 is stable too, despite 2 legs ofc , the 4 legs variant is massively stable”

“Flexispot is usually the cheapest decent option. If you want nicer cable routing or shelves, Dezctop or Fully make the upgrade feel worth it without getting overly expensive.”

“If you want something solid, definitely check out the FlexiSpot. I’ve had mine for a year, and it's pretty stable even with dual monitors. Plus, the motor’s held up well, so my worries about it failing were unfounded.”

“I have a flexispot at work, and an uplift at home. If money is a concern go flexispot. If not, uplift dual motor.”

“Én Flexispot E7 Pro-t választottam + IKEA asztallal, ez nekem is nagyon bevált. Akkor tavaly Flexispot nem szállított Mi-ra, Ausztria ismerősön keresztül lehetett (és persze BF áron érte így meg)”

“I’ve got a fully Jarvis and haven’t got one complaint about it, looks great, works well and it’s huge. Partner has a flexispot and it’s good too but there is a noticeable quality difference”

“Max £150 and decent don’t belong in the same sentence. I have a Flexi Spot E7 frame and then bought a thick solid oak desktop from a kitchen company cut to my desired size. I’d say I am £500 all in and it’s been one of the best purchases for my office.”

“I’ve got a top tier one back in 2022 and it’s still going strong! Not sure what the model is, probably the E7 (two legged, two motors). Would by one again to be honest”

“My gf and I both bought fezibo standing desks like 5 years ago and they both still work fine. The finishes are kinda cheap, but it's functional. I briefly had a flexispot and it seemed to be better built.”

“I have a Flexispot standing desk from Amazon. It was about £200 but I think they get vouchers added on occasionally to make one cheaper so you may find one with a deal for Black Friday. It is good quality for the price and the mechanism is good. I thought I would use it more than I do (my work is far easier to do sitting and I get lightheaded if I stand too long) but I like having the option to stand.”

“Same height, same computer setup. My research led me to the Flexispot E7 Pro with a 63”x30” top. $736 out the door. I just ordered last night. I’ll report back.”

“I just got it put together today. Initial reaction, I couldn’t be happier. Sturdy construction. I went with the rubberwood maple top and it’s nice. I’m pleased with the stability in the up position - I wouldn’t call it rock solid, but I’m confident it is beyond sufficient.”

“Yes, zero complaints. I can use it in the up position with zero noticeable wobble. I can dial in the perfect height when seated. Still very pleased!”

“Ii just got a flexispot desk on amazon for about the same price. Build quality is solid.”

“I got a Flexispot for under $300, 3 years ago. Two legs, quite sturdy. I added a tray for cable management. There are cheap ones at Ikea as well, but I recommend a motorized model because they the hand-cranked ones seem like a pain. I attached a strap onto my monitor for safety (partially because I didn’t want my cat to knock it off!) and recommend a standing mat.”

“I've had a Flexispot for 3 years. It's has a solid design and has worked well.”

“Tengo un Flexispot E7 v2026 que me llegó esta semana y una cinta para caminar Citysports Pro de Temu. No gasté ni 350€ entre ambas cosas (vivo en España pero con tu budget igual debería sobrarte) y por ahora no puedo dejar de recomendar ambas cosas. Capaz me aburra de la cinta pero el escritorio es un must. Encima soy petiso y hasta ahora no me había dado cuenta que el escritorio debía estar por debajo de los 65cm para poder sentarme con la espalda bien recta.”

“I don't know about Maidesite but the Flexispot E7 comes with 7 years of warranty here in Europe, maybe you need to consider that. I have it and I'm loving it. I also considered the Maidesite but I had to buy it from Amazon and it was more expensive without coupon discounts. I suggest you to buy the tabletop somewhere else even though you need to drill (or use a lot of pressure) since it's much more cheaper this way. I got a 48€ tabletop from Leroy Merlin and it's being great.”

“I have both a flexispot and an uplift. There’s definitely a more luxury feel with uplift. No issues with the flexi spot I’ve had for the past 6 years though.”

“My wife and I both have the e7 pro. She got her desktop thru Flexispot as the space her desk is didn’t have a space limitation. I have a space limitation so we purchased a butcher block slab in the size I needed and finished it ourselves last weekend. Her desktop was also a butcher block that flexispot doesn’t carry anymore. But it was relatively easy. There were a few holes we had to drill ourselves because the holes were in the wrong location for the cable management tray. The overall process was relatively straight forward. She has 2 32-inch monitors, a personal laptop and a work laptop all on the desktop. It gives her plenty of space to work. I haven’t noticed any wobble with the c-shape legs on hers in the last 9 months. I’ve been using my desk for about a week. It has two monitors and a soundbar. I can also fit my MacBook and my work laptop. My desktop and PS5 are on a small wheeled shelf that fits nicely over one of the feet. Finishing my own desk obviously meant I had to plan where I wanted all the parts. I found that relatively easy. The finish itself is a clear satin. I did not stain the wood as once I saw the slab I liked its character and elected to leave it alone and just protect it. So far I haven’t found any wobble, but it’s only been a week. I doubt I’ll find any serious issues as my desk is 48” x 30” so it’s a small but deep desk. I didn’t have to extend the bottom piece under the desk like we did for my wife’s desk.”

“The Flexispot E7 Pro is good because it moves the frame bar to the back so that it doesn’t hit your legs when you’re sitting. It also comes with magnetic cable cover and cable management tray and tape. If you go to the official flexispot subreddit and check the pinned post, you can get a 10% discount code.”

“I had the E7 for about a month or so and love it. Min height goes down to 22.8" which is more than enough for me in the office chair I have to work ergonomically.”

“My budget led me to Flexispot and I really love it. I went with the E7 model with a chipboard top. Their higher quality materials were thinner tops, so I wanted a thicker look overall and happily paid less for a manufactured top. Been super sturdy and looks great. I opted for no monitor arms for now since my monitors do extend to a decent height. I might upgrade that down the road just so the top is a bit tidier. I went for 48"x24" because I don't really need much top space in my work life and my office is on the smaller side.”

“Hallo - ich bin auf der Suche nach einem höhenverstellbaren Schreibtisches, könnt ihr einen empfehlen ? Ich habe bereits viel gesucht, aber hier tauchen für mich viele Seiten auf von denen ich nicht wirklich überzeugt bin. Entweder machen sie aggressiv Werbung (teils mit Influencern) oder die Seite an sich wirkt fishy, oder der Preis ist für meinen Geschmack maßlos überzogen. (700€ aufwärts) Farben sind prinzipiell erstmal egal, er sollte 2 Motoren haben, bei der Tischplattengröße bin ich mir noch unsicher ob 1,6m - 1,8m - 2m x0,8m. Ich habe 2x 27Zoll Monitore und würde gerne mein PC Gehäuse ebenfalls drauf platzieren. Habt ihr Empfehlungen die ihr selbst benutzt ? Mit was müsste man preislich rechnen.”

“I bought the FlexiSpot E7 Pro (on sale) and delivery was smooth. The price-performance ratio is amazing, and the quality is really good too. I'm using the maximum tabletop size of 2m x 0.8m and I'm completely satisfied. Feel free to check out my post in r/gamingsetups to see what it looks like in my room!”

“If you want built to last, you want uplift or above. If you want price to performance Flexispot E7 is probably the best value. Anything below E7, including Flexispot's other desks like the E5 are "budget" desks with lower build quality. If you can only afford a lower end desk, maybe get the one at Costco so it can be returned easily if it fails, assuming you have access to Costco.”

“Keep in mind standing desks are generally expensive. It used to be fully and uplift desks around $800 were the starting point. Those desks still cost about what they used to and are still the same quality (except fully, they got rolled up into Herman Miller. Price went up noticeably, quality stayed the same.) Flexispot are considered a cheaper desk, but the E7 Pro really shook things up by being reasonable quality at a significantly lower price. It's the cheapest desk I would reccomended for a serious buyer. Anything cheaper than it gets those prices by using significantly cheaper motors that aren't built to last. (Waiting for that one person to point out the new reigning budget champion over the E7 Pro because I haven't shopped seriously for desks in a few years.)”

“Flexispot E7 Pro, I'm super happy and would buy it again. It's very solid. Almost no wobble at max extension - I think it's as good as a two-leg desk can get. I don't have 100kg on top but I think it could handle it, it feels built for it. I have the standard desk top (not real wood), if I had the money, I might go for the E7 Pro frame and buy a real wood desk top separately. I would also strongly consider a DeskTronic HomePro (https://desktronic.de/products/homepro?variant=42626563932349), they ship to a few countries in Europe and have local websites (e.g. for UK). I think their quality is also super good. You can support a European company, and actually call them, and have a person on the line that speaks your language and is passionate about the product. Unfortunately they didn't have the size that I wanted, and I didn't want to get the table top separately elsewhere as I was in a rush to buy. Ergotopia Desktopia Pro X might also be a contender to consider if they ship to your country, but they're also not cheap.”

“For $300 electric, FlexiSpot E7 on sale is the move — dual motor, barely any wobble, solid build. Catches discounts often so worth checking. If you want to save more, the FEZIBO gets the job done but wobbles a bit more at standing height. Fine for light use. Honestly for $300 you're at the ceiling of budget standing desks — anything cheaper is a gamble on the motor long-term.”

“Uplift V2 if you never want to think about it again. FlexiSpot E7 if you want to save $150-200 with no meaningful sacrifice. Skip Vernal — stability test reports are marketing. Real ownership reviews tell a different story. What failed first on your current desk — motors or the frame?”

“Uplift and FlexiSpot E7 are the two I'd go with if budget isn't the issue. Uplift has better customer service and a longer warranty. FlexiSpot E7 is nearly identical build quality for $100-150 less. Both are dual-motor, rock solid at standing height, and will last 10+ years. I'd skip Vernal — mixed reviews on long-term stability. One thing nobody mentions: buy just the frame and get a butcher block top from IKEA or Home Depot ($60). Better surface, custom size, same price or cheaper than their bundled tops. What's your desk space like — do you have room for a full 60" top or are you working with a tighter corner?”

“Ngl the sub-$300 standing desk market is rough but doable. VIVO - FEZIBO for stability, the extra storage on FEZIBO isn't worth the wobble. If you can stretch to $380, FlexiSpot E7 on sale is a completely different league. For a laptop + monitor arm setup, wobble is gonna bother you more than you think — worth saving the extra if your back is already done.”

“I've got a Flexispot E7 Pro (the 4 legged version, because we were paranoid about stability and weight capacity). I don't have a lot of scope for comparison, not having had any others, but I can say that I'm very happy with this desk. We just got the frame and then made our own desk surface out of plywood and verathane, and it looks and works great. Very good route to go if you want a desk size that doesn't match the standard dimensions you get from the manufactuerers (the frame is telescoping along the width axis, so it can support a very wide desk if desired). On the person side, yes, the desk does make it easier to stay a bit more active. Some days when I'm feeling very active or doing stuff around the office (filing papers, referencing textbooks, etc) it is super convenient to be able to have it up so I can type and make notes while standing. On the flip side, I've hung my computer tower underneath the desk surface on suspended platforms. If I happen to want to clean out the case or do some other tech work, it's very convenient to be able to just raise the desk to full height and roll my chair right underneath. No crawling around on the floor to get at cables anymore! And when I needed to do a full reorganization of the cables, it was just a matter of rolling the desk out a couple feet (it's on casters, so fairly easy to move) and then raise to max height. Just had to crouch a little in order to walk under my desk and stand up behind it. Likewise, during long afternoon meetings, if I start getting tired, I can always just stand up. Does wonders for alertness. Overall, I have found that getting a sit/stand desk has been a strong positive impact on my posture, energy, and overall workflow. To be honest, though, it's worth it just for the posture alone. Having one additional tool to ensure that everything is at just the right height to minimize stress on the body - and especially one that can do so both sitting and standing - is worth it. Whatever desk you get, I strongly recommend getting an anti-fatigue mat to stand on. Just a regular carpet or shoes isn't good enough. Do your legs a favor and get the mat. It helps a lot with posture and comfort.”

“been using a flexispot for about 2 years now and it's been solid, the memory presets are clutch when you're switching between sitting and standing multiple times during long studio sessions the motor is quiet enough that it doesn't mess with any recording which was my main concern when i upgraded from manual. worth checking if whatever you get has decent weight capacity too - learned that the hard way when i loaded mine up with monitors and audio gear”

“To follow up i have laminate tops. Theyre study, and ive no issues with either the flexispot or uplift laminate tops”

“Six months ago I bought a second Flexispot standup desk. The desk came in with a bit of damage and they replaced the top. I tried to say, hey let me buy a better top but they said they could only replace the original. Makes no sense but ok. I have come to the conclusion that the current desk I have is just not big enough so I want to get a standing L desk. Trying to stay around $1000 or so. After dealing with Flexispot last time I am looking for alternatives. Right now I was looking at a Vernal which based on Reddit posts, people seem to be happy with. I see mixed reviews on Uplift (wobbly when elevated). Anyone anti-Vernal? Any other suggestions out there?”

“yeah I feel like this is goinrg to end up being to list the pros and cons of each and see which ones you can live with. I have 2 Flexispot E7 Pros which have been fine. I just need more real estate. I am not sure if the 3 panels is a deal breaker for me. The other thing that annoys me to no end is Flexispot used to sell the full size desk pad. They stopped selling these for whatever reason and those were great to preserve the top. Had I known they were going to stop selling them, I would have bought 3 or 4.”

“After a few weeks with this setup, here’s my short, honest take. The FlexiSpot E7 is a solid, dual-motor standing desk that feels genuinely premium for the price (I got the frame on sale for 400 CAD). Stability is excellent, even at full height with two monitors and a PC tower, the desk barely wobbles. I even have a ps5 under and my work laptop. Height transitions are also very smooth and quiet, I can raise and lower the desk during meetings or calls without anyone noticing. I paired it with a Structube desk cover which is 60 inches long and 26 inches wide, no issues at all there. Very stable and plenty of space. If you’re expecting magical cable-management solutions, you’ll be disappointed. If you have a complex setup, you’ll probably end up adding extra clips or a tray. Not a deal-breaker, just something to be aware of. Overall: a stable, clean-looking, long-term workstation setup my setup: [https://i.imgur.com/kg3EWm3.jpeg](https://i.imgur.com/kg3EWm3.jpeg) if you guys have any questions, i'm happy to answer”

“this is actually the e7 which is supposedly less stable than the e7 pro. I haven't had any issues with stability at all. I have some small occasionnal wobble if I am standing and doing big hand movements, but nothing that makes me seem worried or unsafe.”

“I've got a flexispot one, have had since covid, works well for me. Have three monitors with no issues. Added cheap IKEA cable trays to the underside, laptop dock, harddrive, network switch etc all sit in one, a nice long extension adaptor and a load of power bricks in the other.”

“Just moved recently and was looking to replace my old desk with a new standing desk. I bought the E7 Pro after much debate, with the dark bamboo desktop, 55x28. Pros: \- Love the wood that came with this desk, feels premium, smooth and a I genuinely like working on it. \- Wire management is great. Came with everything I needed, including the tray that spans almost the width of the desk, where I stuffed my power strip and all my cables. Also love that I can hide the motor wires with the magnetic cover. \- *Pretty* stable. This is my first standing desk so I don't have a reference. But currently have no complaints when I'm standing. Will expand on why this isn't perfect in the cons. \- Very smooth motor. The way this goes up and down is a pleasure to see. So smooth, not too loud imo. \- Easy installation. Only thing was the desktop didn't have pre-drilled holes for wire management tray. Cons: \- Again, *pretty* stable. originally had my main monitor mounted, and it would shake quite a bit when I was typing furiously and the desk was raised. Ended up taking the mount off because I didn't see the need for it at the moment, so currently not an issue for me. \- It comes with a usb port on the controls. I couldn't gauge what type of port it was on the listing, but the photo of the male connector plugged in *looked* like usb-c to me and I thought at this price point (plus this desk is fairly new to the market) it definitely would come with usb-c. Had my dreams shattered when I saw a **usb-a port**. Apparently that's how it is for the Canadian market which is disappointing and I do wish that was made more clear. Overall very happy with my purchase. I was constantly sitting and it's nice to be able to take standing "breaks" every so often in a day. I'm still working on making this setup look better, just recently moved so not trying to splurge on new accessories all at once. Debating about the monitor stand I bought as well, it has this lip that's nice for setting things down on and putting my phone/tablet on as well, but it gets in the way of bringing my vertical monitor closer. Here's my old setup for comparison: [https://www.reddit.com/r/Workspaces/comments/1j8y7r0/wfh\_setup/](https://www.reddit.com/r/Workspaces/comments/1j8y7r0/wfh_setup/)”

“I disagree. I have an e7 pro and love it. At chest height at 6’ to lean and work on, my e7 pro has no wobble. And quality is there, I’m sure there could be higher gauge and quality at higher price points, but what I have works for me and is a great bang for buck buy. No regrets, no plans to replace and it’s been 2 years running so far and no issues.”

“I have a flexispot - absolutely no issues. Love mine!!”

“I think mine goes down to 23in”

“Yes they are. You can even get a desk cycle or walking treadmill to make meetings a workout. I've got the Flexispot electric desk and it's been very good and on around £230 as a Black Friday deal.”

“At 44"+ the only thing that matters is whether the frame has a crossbar between the legs. Without one, everything wobbles. Full stop. Uplift V2 Commercial has the crossbar. Most stable desk I've used at standing height. 15-year warranty on frame and motor, which tells you they trust it. FlexiSpot E7 is close - C-frame is inherently more rigid than T-frame. Usually $150-200 less. No hands-on with the Vernal so can't speak to it. One thing that fixed 80% of my wobble - push the back legs against the wall. Also a clamped monitor arm adds way less shake than a freestanding stand.”

“I’ve had no problems with my flexispot”

“I have a flexispot pro e7. Top is 48x24, I wish I had gotten a larger top but it’s very simple to change it out.”

“Sorry for the late response, but yes you’re able to freely change the top. I think you can even go up to a 80x30 desk top”

“Agree -- I've had my Flexispot for three years, including two moves when having some extensive work done on my house, and it's super solid. I have dual monitors plus attached cat beds on mine.”

“Technical writer here who’s been WFH for years. Go electric. You will absolutely not crank a manual desk up and down 4 times a day, so it’ll just end up becoming a permanent sitting desk. Uplift V2 Commercial. It’s rock solid with multiple monitors and has a crossbar that kills the wobble you’re worried about. If you want to save some cash, the Flexispot E7 is the solid runner-up most people here swear by. Standing for 12 hours sucks too. Your feet will just replace your butt as the source of pain. Alternate every hour to actually fix the back issues.”

“I just got a FlexiSpot desk and it is definitely worth it. If you work from home a lot or are completely remote, it's a game changer. FlexiSpot is a decent price and easy to put together for a standing desk. It doesn't wobble, it's stable, the motor is smooth and fairly quiet, and the desk is just nice quality. Highly recommend.”

“Yes, but you do have to be disciplined to use it: at times I forget mine is a sit/stand desk because I just sit my arse down out of habit!! But they do make a difference for sure. I bought a FlexiSpot chassis (forget which one exactly - E7 or variant maybe?) and then a nice oak worktop from a company that just does worktops and fitted it myself. Super sturdy, fast to go up and down and holds plenty of weight. Get a dual motor variant if you can.”

“Flexispot E7 or Uplift V2. Both have built in cable management trays you can bolt underneath. Get a cable spine for the moving part so nothing snags when you adjust height.”

“I have the E7 Pro Plus standing desk with the bamboo desktop (24 X 48) I got for under $400 a couple of weeks before BF. I'm happy with it, it's very stable and sturdy. The box for the frame is heavy so beware if you need to lug it upstairs. So far, motor is quiet and seems to work well. Although the assembly is straight forward, you will need help to flip it over as again, the frame (particularly the motors) is heavy.”

“I recently got a Flexispot! Ordered off Amazon for something like $250. No complaints so far. Definitely stable.”

“I have the E7 Pro and have had it for a year and a half. It's amazing though I do want to say that it still wobbles at a standing height (if I push on it, for regular use it's unnoticeable). The extra leg room space advertised from the c-leg structure also doesn't matter much if you get a larger desktop. Depending on your use case the extra weight capacity on the E7 line can be beneficial, but otherwise the E5 should do just as well at a better price.”

“In that price range Id definitely recommend flexispot, they have plenty of models to choose from and lots of customization options”

“Flexispot. Go with a manual lift. Do not recommend uplift- super unreliable”

“The E7 Pro is very stable. No, it won’t compare to a heavy mahogany executive desk, but it will certainly handle someone pounding on their keyboard. My wife has an older, lower level FlexiSpot, and she never complains about stability. For those who complain about stability, I am not sure what they are doing to their desks.”

“I have recently bought flexispot E7 Pro. Since then most of the time I work in a standing position. Delivery took about 1 week in EU, it took me one hour to assemble, it is not as straightforward as IKEA, but still relatively easy and all the instruments are provided. Table itself is stable enough, I don't notice any shaking or trembling during working or typing. I bought the smallest version 120x60. Which is actually enough for my work setup (laptop + monitor). I have black tabletop, which looks good but collects all the fingerprints. Overall I am very satisfied with the purchase, highly recommended.”

“Also have a flexispot and love it.”

“I have had a Flexispot standing desk + standing mat for several years and really like both. I think together they were around $300.”

“It has held up really well! I use it for both sitting and standing just about every work day, and I haven't noticed any change in how well the hydraulics are working over time. The desk top got a couple small dings when I moved with it last year, but otherwise it is really good shape.”

“I have one (Flexispot). I didn't pay that much for mine though. Got it on Amazon, and picked up the wooden bit from IKEA (I got the cheap, fake wood... Been meaning to replace that with some proper wood but it's not been a priority). I don't have any extension leads or anything like that with mine, but I had plenty lying around so just stuck one to the underneath of the desk. It's been fine for the last 4 years. I keep saying I'll 3D print one of those honeycomb kits to do proper cable management, but again it's not been a priority so far. I use it regularly. I was getting back problems before (and I have a pretty decent / comfy chair), but that's disappeared since being able to stand. If it does break, I'll replace it with another one without hesitating.”

“Check the E7 or E7 Pro depending on the desk top you select it will be within your range. The E7 many be better if you want the lowest price from the $500.”

“I got one from a company called FLEXISPOT and I love it”

“For back pain, I would buy the desk for position changes, not as a cure by itself. The biggest win is usually breaking the 8-10 hour same-position loop. If you keep the laptop low, monitors too far forward, and then stand for three hours with locked knees, the expensive desk will not feel that different. But if it makes it easy to switch for 20-30 minute blocks, it can be a real upgrade. With two monitors, a gaming laptop, keyboard, mouse and speakers, I would prioritise frame stability and desktop depth over cable gimmicks. A 60 inch wide top is nice, but depth matters more than people expect. Around 28-30 inches deep gives you room to keep the monitors back and still have your keyboard/mouse in a sane position. In the $400-600 range, FlexiSpot E7-type frames are a reasonable lane if you are not overloading the desk and you buy from somewhere with a return policy. I would be more cautious with the very cheap single-motor desks or thin tops, because wobble gets annoying fast once you add monitor arms or type at standing height. Also fix the laptop part at the same time: laptop on a stand, external keyboard/mouse, monitors at a height where you are not craning down. That may do as much for your lower back as the standing feature. My boring test would be: after you get it, stand after lunch for one easy task, sit again, then stand for calls/admin. Do not try to become a standing-only person in week one. That is how people buy a mat, overdo it, and decide the whole thing was pointless.”

“Stability is the right thing to focus on — the gap between desks in this regard is genuinely large and easy to miss in reviews that don't test under load. A few things that actually predict wobble vs. solid feel at height: Frame gauge — wall thickness of the steel matters a lot. Desks that don't publish this spec are often the ones people end up disappointed with. 2mm+ is what you want for heavy setups. Dual-motor vs single-motor — for dual monitors + laptop you're adding real weight, and single-motor frames tend to flex and vibrate more when raised. Dual-motor will feel night and day. Crossbar between the legs — some frames skip this to save cost. Under a heavy load it makes a noticeable difference in lateral sway. Max height vs. stability tradeoff — desks that advertise 130cm+ max height usually sacrifice some rigidity to get there. If you don't need extreme height, a desk capping at \~120cm will feel more solid. Desks that consistently hold up well under your kind of setup: Flexispot E7, Uplift V2 (or V2 Commercial if budget allows). The ones people tend to regret with heavier loads are usually budget-tier single-motor options. What's your budget range and do you need a specific height for standing?”

“I just bought the Flexi spot E7 pro 2026 and is phenomenal - 180kg max load, dual motors and extra steel. Very good, faster and better the previous pro. Paid 330€ its on sale instead of 500€ so far so good”

“Same but not short. Happy w the flexispot e7”

“I recently bought the E7 Pro. Bought a 60x30x1.5 butcher block that’s roughly 80lbs and loaded it with I’m guessing another 80lbs+ of equipment and attachments. So far it seems to handle everything without issue. Movement is smooth and pretty quick and overall I think I’m very happy with it. Only had it about 6 mo so I can’t speak to longevity. I’ve seen the horror stories as of late with people having one side fail at height but from what I can tell neither issue has been a flexispot (one was an uplift). But overall I think I made a good choice and I do love the desk. I would be happy to recommend the e7 pro based on the little I know as of now. Do with that what you will. Good luck!”

“Personally, I’ve been loving my FlexiSpot E7 though. It’s cheaper, super smooth, and surprisingly sturdy. I think at this point it just comes down to features and aesthetics more than anything.”

“Really, if you're going for most brands, I would recommend going for their mid tier range of products and not their cheapest models. For Uplift, I'd go with the V2 or V3. The V3 has better stability at standing height and faster motors. Memory presets actually get used more than you'd think when you're adjusting multiple times a day. Flexispot E7 is a lot cheaper than Uplift, and people don't really complain about build quality as long as you stay E7 or above. Below that, you start running into issues. There's also the Desky Dual Laminate Sit Stand Desk if you want something between those two on price. its dual motor and has a 300+ lb capacity.”

“Flexispot E7 or E7 Pro with frame only and your own hardwood top from Amazon. Here's why: 1. Flexispot is cheaper and if you reach out to admins on their subreddit, they will provide discount codes 2. Active Junky browser extension also currently giving an additional 6% cash back 3. Better specs on paper than Uplift and Smart Desk 4. Simpler. You don't need all of those customizations. 5. Flexispot team is active here on Reddit engaging with real people to help improve their product and customer experience (Uplift doesn't do this as much)”

“a standing desk can make a big difference if you work long hours. alternating between sitting and standing helps with posture and fatigue. flexispot and uplift are common choices, just make sure to check the frame stability and motor noise. tools like dezctop focus on stability and workspace design with thoughtful cable routing and modular organization so your setup looks clean and feels balanced while working.”

“I have a Flexispot E7 Pro that's been reliable past 5 years since the pandemic started.”

“You mean when it lowers and raises? Not too loud.”

“Fine for me but I have the higher tier model.”

“I have the same model (70ish in) and it's been pretty reliable for the last 3 years.”

“Yes, Wirecutter's picks are great, but for the best bang-for-your-buck in 2025, the FlexiSpot E7 is arguably the desk to beat.”

“The key things that matter long term are motor quality, frame stability at full height, and weight capacity. Dual monitors are totally fine as long as the desk is rated appropriately and has a solid steel frame. Cheap desks usually wobble at standing height, that’s what gets annoying fast. FlexiSpot is generally decent for the price. You don’t need the premium luxury model, but avoid the ultra-budget no-name versions. Mid-range with good reviews is the sweet spot. Also remember: the desk won’t fix posture by itself. A good chair, monitor arm, and anti-fatigue mat matter just as much.”

“Flexispot e5 /e6. Flexispot are considered the better “cheap” desk. It may be a bit wobbly depending on the reviews. Check r/standingdesks I had a virtual ergo assessment done at work and that’s the one they suggested in “budget” category and which I will likely be getting. Flexispot e7 is way better but also more expensive. Uplift are great. It depends on some requirements though. Please pay attention to miminis height specially if you are short. Many options advised below are not great for short people”

“I got a Flexispot frame (E7 Pro) and sourced the desk top from a from somewhere else (I'd have to look). I use it daily. Normally for Teams meetings, sometimes for easy tasks. I normally do half an hour or so after I've been to the gym/for a run at lunch rather than just flopping down into my chair. I find it helps energise me a little as well.”

“Hi! I'd been using the flexispot standing desk for almost 3 years now. And yes, it made a big difference with my setup, since I'd been working remotely the since 2020 and I can adjust my table depending on the mood if I want to stand up while working or if I want to work in a seated position. I can give you a link on where I purchased the table if you like.”

“dito ko binili yung standing desk ko (affiliate link) https://s.shopee.ph/2qPeZcfko5, so far no issues encountered, tapos recently lang nilagyan ko siya ng caster wheels para madali siya i-move around pag naglilinis ng room haha optional lang talaga 'to pero if isa ka sa madalas mag-arrange ng room maganda maglagay nito https://s.shopee.ph/8ARAvbUH6F”

“I’ve had no issues from the flexispot desk. Solid cable management, height adjustment, and weight capacity. I’ve really loved it, I adjust the height from standing to sitting at least once a day, sometimes many more”

“flexispot e7 is probably the best bang for buck in that range. had mine for over a year, no wobble, motor is quiet. honestly anything under $200 is gonna feel flimsy after a few months so id aim for the higher end of your budget”

“And to add to this I paid like 100 quid for the desk from flexispot a few years ago and repurposed the top from my non standing desk and another 100 squiddles for the walking pad off amazon. 200 quid for the lot, 500 sounds steep. You can also buy them from ikea for a fraction of that”

“Whatever you do, do not get manually hand wound standing desks! You will regret it on your 3rd go. Was in a similar position last year and ended picking up a Flexispot E7 Pro + a standing mat + monitor arm and can't go back. Did recently splurge on a Balolo desk storage and laptop/ iphone stand and really has helped to declutter.”

“I got a Flexispot one a few years back & it’s been great!”

“I've had a flexispot and autonomous. I didn't like the surface of the autonomous so when it got damaged I replaced with the flexispot legs and put some real wood on top. Working fantastic.”

“I'd be willing to bet the 2-Leg E7 Pro is more stable than the E7 Plus given our testing of the E7 Plus. You're also not dealing with two hex rods to drive the columns. There's a reason the frames are so closely priced. The 2-Leg is the best version of it while the Plus is a stripped down 4-leg made to give the appearance of stability. >The bitterness of poor quality remains long after the sweetness of low price is forgotten. - Benjamin Franklin (supposedly)”

“Buy both and see for yourself. I think you’ll see and feel the difference in quality between the two with the E7 Pro being better. If you truly want a stable platform. It’s their E7 Plus Max.”

“A joke? No. One of the founders of flexispot often posts to buy both options and return the other. I’m simply saying you can do it. You wanted an opinion. And to be frank, you got the most honest one you’ll ever get. I’m not pitching my company. I’m pitching the best option for you from flexispot.”

“I have the E7 pro, with a supplied top at 120x60, and it's rock solid. The lift mechanism is smooth, and the memory makes it simple to switch between sit and stand. I ahve no problem with it at standing level with 3 x 24" monitors on it.”

“Ik heb een Flexispot. Wel tevreden, al heb ik mijn 2 monitoren op een flexibele arm gemonteerd en ze durven wel wiebelen als ik aan het typen ben. Als ik nog eens een zit-sta zou kopen, dan eentje met 4 poten ipv een 'C' of 'I' frame, voor de stabiliteit.”

“I have two Flexispot desks. Happy with both. My only complaint is that they don’t go a little lower. If you add wheels, you may find you need a small footstool to rest your feet.”

“Just got a FlexiSpot E7 Pro. So far I really like the frame and mechanism, but I think I chose poorly on the desktop material and will probably buy some wood from a lumberyard and make something more attractive.”

“So when you go to FlexiSpot, you can choose from a large number of standing desks. Once you choose the frame type and leg type, then you choose the desktop. When choosing the desktops you can choose from solid wood ($$$$), all the way down to less expensive materials ($). I chose a chipwood top which was not great but was $99. I’m thinking of returning it.”

“I got a flexi spot one and haven’t regretted it, I just do meetings stood up and it makes my back much less stiff by the end of the day!”

“Flexispot makes great standing desks that don’t break the bank. Been using mine since 2020 with no issues!”

“ofc electric... bought mine form amazon under 100 and lasting for over 3 years now”

“got my flexisport from amazon abt 100. still working after 4 years”

“Figured I’d share my initial experience with the FlexiSpot E7 since I spent way too long researching desk frames... Before this, I had a Titan Fitness A2 frame. It was fine at first, but it’s single-motor and couldn’t handle the weight of my setup. I’m running a 60” x 30” butcher block that’s around 60 lbs, plus two 27” monitors on standalone monitor arms. On top of that, I like to sit pretty low, and even at its lowest setting the Titan was still a bit too tall for me. With Xmas sales, I decided to go for an upgrade of the frame. My must-haves were dual motors and a lower minimum height. I was only looking at frames (already had the desk top), and narrowed it down to the FlexiSpot E7, E7 Pro, and Uplift V3. I ended up going with the E7. The E7 Pro has a higher weight limit, but I didn’t need it for my needs, and the Pro’s minimum height does not go as low as the standard E7. Price also played a role... the E7 was less expensive compared to the other two. Setup was overall pretty straightforward. Took me about 1.5 hours total. The hardest part was getting the frame perfectly centered on the butcher block. For whatever reason, I couldn’t get it exactly even... it’s probably off by like 1/4 inch on sides... but it doesn’t affect stability or use at all. One thing worth noting: this thing is heavy. Definitely needed help flipping the desk over once everything was attached. So far, I’m really happy with it. The desk is very stable, even fully extended at standing height, which was my biggest concern coming from the Titan. It has a very slight wiggle but that's expected with two legs only. The motors are also noticeably faster and smoother than my old desk. One small but underrated feature... the child lock. I’ve got a toddler who loves pressing buttons. And finally, the lower minimum height is perfect for me. Overall, zero regrets with the E7 so far. I'd recommend the desk based on my experience w/ it so far. Shipping was also quick. I ordered it on a Friday and got it the following Tuesday(?).”

“I have a flexispot from Amazon. Love it. Use it daily. I try to stand for at least 4 hours a day”

“i have a flexispot from amazon which i would consider more on the budget end for electric. had it for four years and change positions multiple times daily. never had an issue. it also survived a move no problem.”

“I got mine from Flexispot and it is great. Hindsight, would've done the IKEA countertop instead of the Flexispot desktop, but I'm not unhappy with it either. Check my post history if you want to see mine.”

“Mas okay yung FlexiSpot pero mas mahal. Mag Deskey ka kung hindi pa kaya ng budget mo. Depende din sa ipapatong mo kung laptop or desktop na PC. Para sakin sulit siya kasi sumasakit na yung likod ko minsan. Inaantok din ako kapag nakaupo tapos sobrang lamig ng AC.”

“I was looking at the Magnus pro but couldn’t justify spending over 1000. So i settled on flexispot e7 pro. I got the desk that is 55 by 30. The extra debth is a game changer. I’ve always had desks that were 24 inches in depth. I have 2 monitors ps5 and 2 laptops and have plenty of room https://preview.redd.it/5yf28w5w64jg1.jpeg?width=4032&format=pjpg&auto=webp&s=4b32bd24d60c6e7c091aa4d7061f9205cfed6ee1”

“Another data point for OP. Wife and I each have our stand up desks from flexisoft since 2019, used daily, moved three times across the city, across the region then across the country. Still working well.”

“I have the cheap standard one, and a nicer FlexiSpot one. The cheap one is definitely not as good as the nice one, but it’s still more than good enough.”

“The Flexispot dual motor options are around that range iirc? I’ve had mine for about 4 years with no complaints. Dual monitor (32”+24” vert), mac mini, all my power bricks were strapped to a tray under the table.”

“In motion, I don’t have to worry about a full mug of coffee spilling. Static, about the same as a normal desk.”

“I have a good I got it off Amazon. It’s by Flexispot.”

“Flexispot brand on Amazon for me. I only wfh occasionally these days but it’s still good to be able to stand a few times a day. Typically I stand for calls and sit to work and that helps me to keep in a routine and not forget.”

“I’m 6’5 I went with E7Pro. I still have some room (not max height) with it + walking pad.”

“I’m 6’5 I stand at full height + on walking pad with my flexispot E7 Pro”

“I have the e7 pro with the bamboo desktop, bought it 2 years ago. I really like it. Ordering was easy. Getting it delivered was a pain (FedEx screwed up). Flexispot customer support was basically no help ghee. It did finally arrive in good condition and I like it. I use it every day in both sit and stand modes.”

“i was in the same boat a couple years ago and went with a [FlexiSpot standing desk](https://featherab.com/shopit?market=am&search_keywords=FlexiSpot+standing+desk). honestly it was worth every penny for me. i’ve got two 27-inch monitors on an arm clamped to it and it’s rock solid even at standing height. no wobble at all. the motors feel smooth and it’s held up perfectly through daily use. if you want something that won’t need replacing in a year it’s the way to go.”

“with that heavy AW3225QF in the middle, stability is key. i'd go with the [FlexiSpot E7](https://featherab.com/shopit?search_keywords=flexispot+e7) - the frame is rock solid at standing height and handles 3 monitors easy. for the center screen, you'll want a [heavy duty monitor arm](https://featherab.com/shopit?search_keywords=heavy+duty+monitor+arm) rated for that OLED weight. the E7 has memory presets so switching positions is one button. progressive and desky are good too but flexispot ships faster to canada in my experience.”

“My Flexispot is working great after four years on the up and down job.”

“My flexispot e7 is really sturdy. I was really surprised since it only has 2 legs. I love it and recommend, good quality materials, not one bad thing I can say about it.”

“E7 with a second hand tabletop”

“Yeah, the e7 has 2 legs and the e7plus has 4 legs. Price tag is different also.”

“I don’t game but I like my Flexispot. Looks nice and it’s pretty strong”

“E7 Pro, white with bamboo top”

“You can either go the preset ones from uplift, flexispot, etc. but I'm not a fan of the table top because it's usually particle board. It can work for you but to each their own. I got a flexispot dual motor standing desk and paired it with a butcher block top from home depot. You can usually find butcher blocks easily assessible from the big box stores. I also screwed in casters on the bottom so I could move it around when needed. Using the Ikea Signum as cable management and it's...okay. It works but whatever. Depending on how heavy your table top is and how much stuff (weight of monitors, PC tower, etc.) you're going to put on your desk, would recommend get a frame with dual motors.”

“£150 isn't a huge amount for a decent standing desk. I have a Flexispot E7 Pro which I paid just over £300 for. Didn't buy their top and just added a cheap top from IKEA and drilled the holes as then I could get a better sized (large) top.”

“I love my flexispot desk (E7)!”

“I went with flexispot. If this is a “dream desk” then might be worth splurging for a sit/stand option? If you only want to sit then you might be able to make something for the legs, but not coming up with good options to adjust the height. If you’ve built night stands then joining the top boards shouldn’t be much of a problem for you. Only comment is that butcher block can be heavy, so double check any weight limits. The pocket holes might be a good option - don’t use any glue so if/when you ever move then you can take it apart much easier.”

“I have a 180cm wide Flexispot E7 Pro with a walnut(look) top. Very sturdy, not too expensive. Love it.”

“Flexispot has been great for my needs and got some cable truncheon that has cable holes all along it for exit points”

“I got a Flexispot for over a year and it’s been a game changer imho. The biggest difference between manual and electric is convenience; electric ones let you switch heights with just a button and are super smooth. I definitely use that feature a lot more than I expected throughout the day, vs. my old crank desk that I barely bothered to adjust. Stability-wise, look for something with a solid metal frame and a heavier base. My Flexispot stays steady even when I’m leaning or typing fast. If you go for a cheaper or flimsier model, they can get wobbly at standing height.”

“Honestly? Yes, it's worth paying more. I went through two cheap ones before biting the bullet on a FlexiSpot and never looked back. The cheap ones wobble, motors fail, and the height range is usually limited.”

“I run a YouTube channel on desk setups mainly and have been sent so many standing desks over the last two years. Lol. Here are my findings: -My wife bought a cheap fezibo for $250 and she still uses it. Not the best looking, but still works for her. -Flexispot and Vernal are the best value for your money and solid desks with different price points. Well within your budget and even under $400 with sales. -All two legged standing desks wobble at standing heights. Even the expensive secret lab magnus pro. The only way to mostly get rid of a lot of wobble is to have a 4 legged standing desk. I actually kept one from flexispot that’s 4 legs as a work bench for shooting content. -With your budget, I would focus on the look and features that are important for you. Things like depth and size for your needs as well. Accessories that come with it like a cable management tray, etc. -If you use clamp on accessories, check to make sure the desk will support that on almost all the edges. I’ve found some desk designs don’t allow you to easily use clamp on accessories which I like to use. -Always looks at real video or customer pictures of the desk before you buy it. I’ve seen brands over saturate their marketing pictures. And when it comes in, it looks dull or quite different.”

“Flexispot. Absolutely brilliant and made in UK too. I have this one with a bamboo top and drawer: [https://flexispot.co.uk/adjustable-standing-desk-e7pro-series.html](https://flexispot.co.uk/adjustable-standing-desk-e7pro-series.html)”

“Flexispot are great. I've got one of theirs and is absolutely brilliant. I have the E7 Pro I think. I don't use it as much as I thought I would but it's a great nice to have if you can fit it. I have 2 x 34" ultra wides on mine and is solid is a rock.”

“I've had a Flexispot for almost 3 years now, no problems. I really don't raise it a whole lot since I got a decent chair, but it is nice at times to be able to stand.”

“Yes! I have a flexispot. No bell and whistles. Used a cheap ikea tabletop for it. I *love* it. Office fit out at work just put some in too so I get to use one there too. Sooo much nicer to be able to wander about when on calls and just move. Definitely my best Covid purchase.”

“Yes, have a flexispot. Moved a couple times with it so pretty robust as after 3 years had no issues. Use it quite a bit for standing, although my favourite use for it is being able to adjust the height to the optimum sitting height. Also makes hoovering underneath a lot easier.”

“Love my Flexispot E7 pro - been using it now for 3 years”

“I went with flexispot and I am honestly very happy. Skip the Magnus bs”

“We’ve had one off Amazon since 2020. For the price it’s great. No wobble issues even on carpet when fully extended. The motor isn’t the smoothest or quietest but functionally fine. It tweaks out some times and need to unplug for a sec but motor seems fine after 5 years. Got the cheaper wood laminate top and it doesn’t look tacky and the surface has held up well to daily WFH duties. I’ve used $3000 wood top ones and they for sure look nice but there are diminishing returns.”

“I would highly recommend it tbh, but admittedly I have some tendinitis from sitting at a desk so even just the ability to set my desk at exactly the right height while sitting has made a huge difference. But being able to also stand when I want is great. I went for one from Flexispot - not the cheapest but I’ve had it for more than four years now and still going strong.”

“i'd go with flexispot, solid for the price. desky's decent too but tends to cost more. get whatever fits your setup better.”

“Personally I think it would be worth it but Flexispot is a good cheaper choice.”

“I just did all of the necessary research for this for myself. I bought the flexispot e7 pro standing desk. Buy it when it’s on sale for a decent deal. If you aren’t very tall the regular e7 should work for you”

“IMO Jarvis is about 10% nicer and typically waaaaay more expensive. E7 is still plenty quiet, fast, and stable, and is the right pick between the two for most people.”

“Flexispot E7 is the best option for most people. Great value”

“+1 for flexispot! I have the E7 as well and I love it. theres also a helpful breakdown of the best standing desks in this post if anyone is looking for alternatives.”

“Yes, it definitely is. I have the Flexispot E7 Plus, and it is worth it. Check with u/Ramzes888 ; he can set you up.”

“I bought a Flexispot E7 Plus (4-leg/2-motor design), a couple months ago. I've loved it so far. It's sturdy, quiet, and I love the rubberwood top I chose for it. I generally do my meetings standing up and my other work sitting down, which is about 50/50. At sitting height the wobble isn't any worse than a non-adjustable desk or table. At standing height, I'm 6'-3" there is a slight wobble side to side, but not bad. I've got dual monitors on a mount connected to the desk, a sound bar, a desktop shelf thing, etc, all on the desk, no problem.”

“Yes 55x28. Love it! No complaints.”

“I have the Flexispot and it has been amazing for me. Same with customer service. Over a year now of use and going strong”

“UPDATE: Ordered the FlexiSpot and it showed up within 24 hours! Turns out they have a warehouse in Katy (Houston), TX, where I live. It was very easy to put together and looks pretty great.”

“Love my 4 leg Flexispot, extremely sturdy solid wood top and great price. I researched for a few months before I bought this desk..”

“I wouldnt buy anything that’s particle board. I first bought a cheap one on amazon that was particle board and i chipped it just putting it together. Returned it and got my E7 bamboo and would do it all over again.”

“FWIW I ended up getting a flexispot (E7 i think (dual motor)) and bamboo top. It’s very similar to the jari i had at work - I’m very happy with it”

“I put together my FlexiSpot E7 Plus this weekend. It's my first standing Desk and I chose it because I wanted there to be as little wobble as possible. I can happily report that even at standing height (I'm 6 foot )it's rock solid. I'd say it pretty much feels like static construction desk at any height. Probably even has less wobble than some static desks due to its heavy weight and solid construction. Can absolutely recommend.”

“I was concerned about wobbling too, and I chose the Flexispot E7 Plus: 4 leg design and can lift A TON of weight. No wobble whatsoever! I was so impressed with the results that I also shot a little video to show operation: https://www.reddit.com/r/FlexiSpot_Official/comments/1angiu2/desk_motion_on_the_way_up_with_flexispot_e7/”

“yes it's quite solid. I even lean often on it when I start to get tired of standing, and it is great. For example, if it can help, my monitor is a large and heavy 34 inches and sits on an arm clamped to the desk instead of its based (you can probably see it in the pictures): during normal use even the monitor does not wobble at all.”

“Ive read reviews when I was doing research before purchasing that talk about the Flexispot having alot of wobble, but I dont have any first hand experience with it. Thats all the feedback I have has I ended up going with the Apex 2 leg from deskhaus.”

“Flexispot’s fine, but their lower-end models feel flimsy once you raise them all the way up. I had an EN1 and sold it after six months. The frame flexed too much when typing. If you’re spending close to $150, a crank desk or a used Jarvis frame off Facebook Marketplace gives better long-term value.”

“I've had nothing but problems wtih the control panel on my Flexispot E5. It usually works for a few months and then breaks. I've been through about 4 panels in 1.5 years. Each time it breaks Flexispot makes me send a ton of videos, photos and then replaces it. But it's been a huge pain. Something is very defective and they know it is, yet keep using it”

“No experience with Desktronic, but I just ordered a new Flexispot E5 last month after being impressed with an older E5 I'd used a few years ago. It seems like they've cut down on the build quality compared to the last desk I used, this new one has more wobble in my experience, and seems to be much lighter as well. Even the specs have changed to be closer to what used to be the cheaper E5 Lite. Not sure if this is just on the entry-level models to steer people towards the higher-tier desk, or purely cost-cutting/'enshittification' in action. Also not been overly impressed with the customer service/returns process, I had a motor failure after 2 weeks, and I've had to send several troubleshooting videos and clarifications, with a different person responding (and seemingly not reading the previous emails) each time.”

“I need the desk to go low enough to essentially be right on top of my knees for ideal ergonomics for my proportions (which is just about 23.5" height before taking into account the thickness of the tabletop), but with the T-shaped frame on the Flexispot E5 I just got in, my knee hits the bar which goes between the two legs far before the point where the chair is as close to the desk as it should be. I'm using a 48" x 24" tabletop, which I need to do due to space constraints in my place. So, I'm looking for a desk to avoid this. I read that C-shaped frames can avoid the issue of knees hitting the crossbar, and it seems like the Uplift V3 gets as low as I need and has the C-shaped frame I'd need. But I'm told by customer support that the 24" deep configuration will give me \~12" of space from the front of the tabletop to the crossbar, which is a bit short of my need (\~14" I'd say). **Does anyone know the height of the crossbar on the Uplift V3?** If it's not too high, I could possibly still get to a desired height and my knee could get under it. Otherwise, I might have to go for the 30" depth, which apparently gives closer to 16" from front of desk to crossbar, and sacrifice breathing room in my apartment. I asked customer support for the crossbar height measurement, but they haven't gotten back to me yet. On the other hand, **if anyone has other desk recommendations they can point me to which fit these requirements, I'd really appreciate it**. Thanks in advance!”

“My standing desk is an E7 Plus 4-leg, and it wobbles as well.”

“that setup your friend made looks super clean. if you’re not into DIY builds, look for desks with solid wood tops and dual motors because they stay stable when raised. uplift and flexispot are fine but start to feel generic once you’ve seen them a lot. mid range options with real wood and cable trays make the biggest difference. some folks I know switched to dezctop since it keeps that custom vibe but arrives ready to go with built in cable routing, magnetic trays, and shelves that click in so you can tweak the layout later.”

“My Apex Pro was my upgrade from a Flexispot. I expect my current desk to last a decade or two.”

“Uplift is usually seen as the golden standard. Very stable and seem to have good quality parts and good customer service. They "include" (built into the price) a lot of gifts (gimmicks) like a foot hammock, t shirt, etc into their purchase, which actually convinced me to keep shopping. Flexispot is often posted because they run permanent sales and give people discounts/cash back for posting reviews. Their design/quality doesn't seem too good. Deskhaus has good reviews and seems to be slightly better quality-wise than Uplift, though they aren't as big of a company. Their customer service also seems less polished, but still good (again, small company). I wanted a 4-leg frame and they were significantly cheaper for the Peak Pro ($725) than Uplift ($919) for just the frame, so I went with them. Uplift will probably be fine whether you want a 2 leg or 4 leg. If you want to save some money, getting a deskhaus frame and a top from Home Depot, Lowes, etc will probably end up being cheaper and a better overall desk.”

“At sitting height, pretty much any half-decent standing desk will be stable. If you're 5'4", 2 leg desks from a good company should still be stable at standing height. If you're 6'4", 2 leg desks will probably be unstable at standing height. I have a 4 leg desk and it's perfectly stable even at maximum height. I have to intentionally push it to see any monitor wobble. During normal use, there's nothing.”

“Don’t buy tables with that leg configuration. They vibrate with just typing and is transmitted a lot to the monitor if you don’t have it leaning against the wall. I wish someone had warned me.”

“Check how many leg segments it has. My FkexiSpot desk has 2 and low is just a tad not low enough”

“Peak Pro. Desk Haus is an American company that stands by their products. I have 3 desks from Desk Haus. First two were flawless. 3rd desk 1 motor connector got damaged in shipping and they sent replacement no questions asked. Great company. FlexiSpot is a nightmare. Just read some posts about warranty. FlexiSpot has “sales” to entice people, but they cut corners. Desk Haus price is comparable with no sales and great quality because of low overhead.”

“Here’s how I see the standing desk market right now, in January 2026. “Amazon Specials” like Claiks, ErGear, HUANUO etc. - Primary consideration: Budget. These are frankly total trash, probably even worse than the cardboard boxes I used for my first few years of standing. Flexispot - Primary consideration: Value. Buy here if your first consideration is budget but you don’t want garbage. Stick to E7 and above. Secretlab - Primary consideration: Cable Management. Buy here if you’re a gamer and/or you just can’t stand to see a cord. Uplift - Primary consideration: Corporate Sales. Buy here if you’re a purchasing manager (at work or at home). No one ever got fired for buying IBM. DeskHaus - Primary consideration: Stability. Buy here if you want to absolutely annihilate any and all wobble or sway, or if you need to support a massive desktop. Branch - Primary consideration: Apartment Chic. Buy here if your home office is also your living room. And where we think we fit in: Ergodriven - Primary consideration: Ergonomics. Buy here if you actually want to use your standing desk. That’s the need we identified. While these brands have innovated around the edges, no one has actually improved the ergonomics of standing desks in 10+ years. We all know the true benefit of standing desks isn’t just standing - it’s movement - both while you’re standing, and in changing positions throughout the day. Experts recommend switching between sitting and standing 20+ times per day. For example, the human ergonomics program at Cornell recommends the 20-8-2 rule: in every 30 minute period, sit 20 mins, stand 8 mins, and move/stretch for 2 mins. That is a lot to manage, especially when you have work to focus on. It’s 2026. You shouldn’t be relying on willpower or setting phone timers to remember to use your expensive desk for its only purpose. Your desk should monitor your presence and position, and automatically move for you. That's what we think anyway. So that’s exactly what our Tempo Desk does. It’s the only standing desk you’re guaranteed actually to use! And so far people love it! You can see reviews on this page . BTW if you already have one of those desks above (or have your heart set on them for the totally valid reasons I listed), you can still get our Tempo controller and just swap out your controllers in a few minutes (Tempo is compatible with all the brands above - and many others - except the “Amazon Specials”).”

“Flexispot din ako kumaha ng standing desk sa kanila, ung E5. Ordered through their site not shopee or lazada, kasi di available ung biggest tabletop size (1800mmx800mm) nila dahil shipping dito sa province. Within Metro Manila siguro available ung 1800mmx800mm. Depende sa frame kung ano compatible na table top size. Baka kasi di kayanin ng motor ung malalaking table top size or hindi kakayanin ng entesion ng length ng frame. Ung E5 kaya ng 1800mmx800mm, un ung kinuha ko. Hindi sya ganun ka wobbly if normal desk use. Wag mo lang tatayuan, wobbly talaga pag ganun kasi 2 legs lang sya. May collision detection rin pero di lagig nagwo-work. Wag ka palagi kampante dito, check mo parin if my nakaharang. Ang bad experience ko lang dito. Ung controller, minsan nag eerror. Di nagana minsan. Pero nare-reset naman sya para gumana uli. Di ko lang sure if nag palit na sila hardware na fix na tong issue na to. Plano ko kunin ung standard 4 leg nila pag may sale/or malaking voucher uli sa shopee.”

“Here’s how I see the standing desk market right now, in January 2026. **“Amazon Specials” like Claiks, ErGear, HUANUO etc. - Primary consideration: Budget.** These are frankly total trash, probably even worse than the cardboard boxes I used for my first few years of standing. **Flexispot - Primary consideration: Value.** Buy here if your first consideration is budget but you don’t want garbage. Stick to E7 and above. **Secretlab - Primary consideration: Cable Management.** Buy here if you’re a gamer and/or you just can’t stand to see a cord. **Uplift - Primary consideration: Corporate Sales.** Buy here if you’re a purchasing manager (at work or at home). No one ever got fired for buying IBM. **DeskHaus - Primary consideration: Stability.** Buy here if you want to absolutely annihilate any and all wobble or sway, or if you need to support a massive desktop. **Branch - Primary consideration: Apartment Chic.** Buy here if your home office is also your living room. And where we think we fit in: **Ergodriven - Primary consideration: Ergonomics.** Buy here if you actually want to use your standing desk. That’s the need we identified. While these brands have innovated around the edges, no one has actually improved the ergonomics of standing desks in 10+ years. We all know the true benefit of standing desks isn’t just standing - it’s movement - both while you’re standing, and in changing positions throughout the day. Experts recommend switching between sitting and standing 20+ times per day. For example, the human ergonomics program at Cornell recommends the 20-8-2 rule: in every 30 minute period, sit 20 mins, stand 8 mins, and move/stretch for 2 mins. That is a lot to manage, especially when you have work to focus on. It’s 2026. You shouldn’t be relying on willpower or setting phone timers to remember to use your expensive desk for its only purpose. **Your desk should monitor your presence and position, and automatically move for you.** That's what we think anyway. So that’s exactly what our Tempo Desk does. It’s the only standing desk you’re guaranteed actually to use! And so far people love it! You can see reviews on [this page](https://ergodriven.com/products/the-ergodriven-standing-desk). BTW if you already have one of those desks above (or have your heart set on them for the totally valid reasons I listed), you can still get our [Tempo controller](https://ergodriven.com/products/tempo-smart-controller-for-standing-desks) and just swap out your controllers in a few minutes (Tempo is compatible with all the brands above - and many others - except the “Amazon Specials”).”

“so i used FlexiDesk first and the height adjustments were ok but not smooth. then i got a Dezctop desk with the lift system and modular D Boards. switching between sitting and standing throughout the day became effortless. my back feels way better now”

“Get the frame and add your own desktop. I think that should keep you in budget, and you pick exactly what you want. Desky's dual frame doesn't wobble even at max height. Cable management actually works too. FlexiSpot's E7 Plus has the 4 leg setup if you want extra stability, but costs more. Desky frame plus butcher block from IKEA or Home Depot is what I'd do. Better motors afaik. Then I'd also look at the desktop material as well. A good core (not honeycomb) should suffice if you're mounting monitors or leaning on it.”

“Yeah that model is one of the most expensive in the flexispot catalogue at 1000 USD. With brands like that you need to look out for sales because the full price is often wildly inflated, especially for their "premium" models. I have an E7 Plus Max and love it. I got it on black friday sale for 600 USD (usually 750 USD). The E7 Plus has four legs like the E7 Plus Max, except with two motors instead of four, and that's on sale now for 500 USD (but is typically 600.) Also these prices are just for the frame, I don't know if you have your own desk top or not lol”

“Honestly, this applies to pretty much any standing desk out there. Even our most stable model, the E7 Plus Max, will have some wobble at standing height. That’s just the nature of adjustable desks. If you want zero movement at all, then it wouldn’t really be adjustable anymore. As for why you’ll see totally mixed opinions on stability, that’s actually pretty normal. It really comes down to how people use the desk and how sensitive they are to wobble. Some folks mostly sit, even if they bought a standing desk. As long as the build quality is solid, pretty much all of our desks feel very stable when seated. Models like the E2 or E5 are more than enough in that case. Then you’ve got people who stand occasionally, maybe for a quick meeting or browsing. In that scenario, the E2 can feel a bit shaky, the E5 is noticeably better, and the E7 series are more stable. That’s usually where opinions start to split. And then there are users who stand a lot, lean on the desk, or really put weight into it. At that point, the E5 kind of drops out, and you’re really looking at the E7 series and up. Even then, if someone is super sensitive to monitor shake, they might still feel like the E7 or E7 Pro moves too much, while the E7 Plus or E7 Plus Max feel a lot more solid. But others are totally fine with the E7 and E7 Pro. So yeah, it’s less about one “right” answer and more about matching the desk to how you actually use it.”

“Going down this road myself recently; Ikea Karlby with DIY legs 74"x 25.5". I've been eyeing the FlexiSpot E7 Pro Max frame+desk to convert my existing since I would like a 30" depth but not sure if I can make it work with my current desk (frame listed at 26.5 at the bottom leg depth.) Doesn't have the cable management system the Secretlabs has but in my opinion you can go pretty far with a drill and some creativity. That said my brother loves his lol.”

“Don’t go cheap at least stick with something mid-range. I’ve got one from Autonomous and another from FlexiSpot for my wife. Height range and speed are pretty similar, but the Autonomous feels noticeably smoother.”

“I bought the Flexispot E7 frame only and attached it to a pre-finished live edge acacia wood counter top from Home Depot. Then I went and got one of Grovemade’s super wide desk shelves as a monitor riser. My only regret is not getting the E7 Pro. The legs (and therefore the crossbar) are set further back so there is more room for an undermount keyboard tray. I was able to find one that works (VIVO KB27HB).”

“Got an E7 but I'd say a monitor arm is just as big of an upgrade. Really really sucks to be looking down at your screen”

“I bought the best Flexispot that was on the market at the time (E7 Pro). Everyone of them does wobble at height, sadly. What about when the desk isn't at height?”

“Uplift and Flexispot were fine but Dezctop kept things look clean long term. Has built in tray and vertical board kept all cables and accessories off the surface. Focus on desks with real cable routing instead of the basic mesh nets most brands use”

“as someone who just did this same calculus (though on about half your budget) i'll say the stability is overrated for a lot of people. like who is truly leaning on their desk that hard? though with an 80x30, it might come into play more than the average soul. that said, I did ultimately go with deskhaus. they had a good deal going with a free top at the time i ordered, i appreciated the company's transparency about their products, parts, and the longer warranty. plus i like a little guy. uplift and flexispot have many product lines, and operate on a more mass-market scale, which is both good and bad. deskhaus makes and maintains one thing, which is desks. budget doesn't seem to be a big issue for you, so for the same amount of money you'd end up with a slightly more stable desk with a longer warranty. but if you don't live in the US (shipping), or want a package deal with lots of compatible accessories (the good part of bigger operations), no reason not to go with this one!”

“I have a FlexiSpot E7Pro which is rock solid, even when raised. Motors both sides, the cable management is good, and they do a great range of tops. The only disappointment is the Walnut top, which is a thin veneer, so scratches and dents easily. Do I use if for standing work? Hardly ever, so maybe it wasn't worth the price, which I did get in a sale, but still, it's expensive for a mostly static desk. What is helping my posture more is a better chair. I had an old Ikea one, which is very comfy, and the new one is more supportive and supports a wider array of support, and thus makes me site better, but I have a natural slouch, so it's sometimes not as comfy although it's better for me.”

“I haven't used the v3 yet, but I've used the v2 and the e7 plenty. I'd say the difference is not worth it.”

“BTW in case you’re interested our [Tempo Controller](https://ergodriven.com/products/tempo-smart-controller-for-standing-desks) works with v2, v3, e7 and e7+”